remove test
Signed-off-by: Armin Kuster <[email protected]>
---
meta/lib/oeqa/manual/eclipse-plugin.json | 322 -------------------------------
1 file changed, 322 deletions(-)
delete mode 100644 meta/lib/oeqa/manual/eclipse-plugin.json
diff --git a/meta/lib/oeqa/manual/eclipse-plugin.json
b/meta/lib/oeqa/manual/eclipse-plugin.json
deleted file mode 100644
index 9869150..0000000
--- a/meta/lib/oeqa/manual/eclipse-plugin.json
+++ /dev/null
@@ -1,322 +0,0 @@
-[
- {
- "test": {
- "@alias":
"eclipse-plugin.eclipse-plugin.support_SSH_connection_to_Target",
- "author": [
- {
- "email": "[email protected]",
- "name": "[email protected]"
- }
- ],
- "execution": {
- "1": {
- "action": "In Eclipse, swich to Remote System Explorer to
create a connention baseed on SSH, input the remote target IP address as the
Host name, make sure disable the proxy in Window->Preferences->General->Network
Connection, set Direct as Active Provider field. ",
- "expected_results": "the connection based on SSH could be
set up."
- },
- "2": {
- "action": "Configure connection from Eclipse: Run->Run
Configurations->C/C++ Remote Application\\ ->New Connection->General->SSH Only
",
- "expected_results": ""
- },
- "3": {
- "action": "Then right click to connect, input the user ID
and password. ",
- "expected_results": ""
- },
- "4": {
- "action": "expand the connection, it will show the Sftp
Files etc. \nNOTE. Might need to change dropbear to openssh and add the
packagegroup-core-eclipse-debug recipe",
- "expected_results": ""
- }
- },
- "summary": "support_SSH_connection_to_Target"
- }
- },
- {
- "test": {
- "@alias": "eclipse-plugin.eclipse-plugin.Launch_QEMU_from_Eclipse",
- "author": [
- {
- "email": "[email protected]",
- "name": "[email protected]"
- }
- ],
- "execution": {
- "1": {
- "action": "Set the Yocto ADT's toolchain root location,
sysroot location and kernel, in the menu Window -> Preferences -> Yocto ADT.
\n \n",
- "expected_results": ""
- },
- "2": {
- "action": "wget
autobuilder.yoctoproject.org/pub/releases//machines/qemu/qemux86/qemu
(ex:core-image-sato-sdk-qemux86-date-rootfs-tar-bz2) \nsource
/opt/poky/version/environment-setup-i585-poky-linux \n\nExtract qemu with
runqemu-extract-sdk /home/user/file(ex.core-image-sato-sdk-qemux86.bz2)
\n/home/user/qemux86-sato-sdk \n\n",
- "expected_results": " Qemu can be lauched normally."
- },
- "3": {
- "action": "(a)Point to the Toolchain: \n \nIf you are
using a stand-alone pre-built toolchain, you should be pointing to the
/opt/poky/{test-version} directory as Toolchain Root Location. This is the
default location for toolchains installed by the ADT Installer or by hand. If
ADT is installed in other location, use that location as Toolchain
location.\nIf you are using a system-derived toolchain, the path you provide
for the Toolchain Root Location field is the Yocto Project's build directory.
\n \n E.g:/home/user/yocto/poky/build \n",
- "expected_results": ""
- },
- "4": {
- "action": "(b)Specify the Sysroot Location: \nSysroot
Location is the location where the root filesystem for the target hardware is
created on the development system by the ADT Installer (SYSROOT in step 2 of
the case ADT installer Installation). \n \n Local : e.g:
/home/user/qemux86-sato-sdk \nUsing ADT : e.g :/home/user/test-yocto/qemux86
\n\n",
- "expected_results": ""
- },
- "5": {
- "action": "(c)Select the Target Architecture: \n \nThe
target architecture is the type of hardware you are going to use or emulate.
Use the pull-down Target Architecture menu to make your selection. \n \n\n",
- "expected_results": ""
- },
- "6": {
- "action": "(d) QEMU: \nSelect this option if you will be
using the QEMU emulator. Specify the Kernel matching the QEMU architecture you
are using. \n wget
autobuilder.yoctoproject.org/pub/releases//machines/qemu/qemux86/bzImage-qemux86.bin
\n e.g:
/home/$USER/yocto/adt-installer/download_image/bzImage-qemux86.bin \n\n",
- "expected_results": ""
- },
- "7": {
- "action": "(e) select OK to save the settings. \n\n\n1:
In the Eclipse toolbar, expose the Run -> External Tools menu. Your image
should appear as a selectable menu item. \n2: Select your image in the
navigation pane to launch the emulator in a new window. \n3: If needed, enter
your host root password in the shell window at the prompt. This sets up a Tap 0
connection needed for running in user-space NFS mode. \n",
- "expected_results": ""
- }
- },
- "summary": "Launch_QEMU_from_Eclipse"
- }
- },
- {
- "test": {
- "@alias":
"eclipse-plugin.eclipse-plugin.Relocatable_SDK_-_C_-_Build_Hello_World_ANSI_C_Autotools_Project",
- "author": [
- {
- "email": "[email protected]",
- "name": "[email protected]"
- }
- ],
- "execution": {
- "1": {
- "action": "Launch a QEMU of target enviroment.(Reference
to case \"ADT - Launch qemu by eclipse\") ",
- "expected_results": ""
- },
- "2": {
- "action": "Select File -> New -> Project.",
- "expected_results": ""
- },
- "3": {
- "action": "Double click C/C++.",
- "expected_results": ""
- },
- "4": {
- "action": "Click C or C++ Project to create the project.",
- "expected_results": ""
- },
- "5": {
- "action": "Expand Yocto ADT Project.",
- "expected_results": ""
- },
- "6": {
- "action": "Select Hello World ANSI C Autotools Project.",
- "expected_results": ""
- },
- "7": {
- "action": "Put a name in the Project name. Do not use
hyphens as part of the name. \n \n",
- "expected_results": ""
- },
- "8": {
- "action": "Click Next.",
- "expected_results": ""
- },
- "9": {
- "action": "Add information in the Author and Copyright
notice fields. \n1",
- "expected_results": ""
- },
- "10": {
- "action": "Click Finish. \n1",
- "expected_results": ""
- },
- "11": {
- "action": "If the \"open perspective\" prompt appears,
click \"Yes\" so that you open the C/C++ perspective. \n1",
- "expected_results": ""
- },
- "12": {
- "action": "In the Project Explorer window, right click the
project -> Reconfigure project. \n1",
- "expected_results": ""
- },
- "13": {
- "action": "In the Project Explorer window, right click the
project -> Build project. \n1",
- "expected_results": "Under the Project files, a new folder
appears called Binaries. This indicates that the compilation have been
successful and the project binary have been created. \n"
- },
- "14": {
- "action": "Right click it again and Run as -> Run
Configurations. \n\t\t\tUnder Run Configurations expand \"C/C++ Remote
Application\". A configuration for the current project should appear. Clicking
it will display the configuration settings. \n\t\t\tin \"C/C++ Application\"
field input Remote Absolute File path for C/C++ Application. e.g.:
/home/root/myapplication \n\t\t\tIn \"Connection\" drop-down list make sure a
TCF connection is set up for your target. If not, create a new one by clicking
the New button. \n1",
- "expected_results": "step 14 to step 16 -> Build succeed
and the console outputs Hello world, you can also check the output on target."
- },
- "15": {
- "action": "After all settings are done, select the Run
button on the bottom right corner \n\n1",
- "expected_results": ""
- },
- "16": {
- "action": "Repeat the steps 14-15, but instead of using
Run Configurations use Debug Configurations: \nRight click it again and Debug
as -> Debug Configurations \nUnder Debug Configurations expand \"C/C++ Remote
Application\". A configuration for the current project should appear. Clicking
it will display the configuration settings. \nin \"C/C++ Application\" field
input Remote Absolute File path for C/C++ Application.\ne.g.:
/home/root/myapplication \nIn \"Connection\" drop-down list make sure a TCF
connection is set up for your target. If not, create a new one by clicking the
New button \n1",
- "expected_results": ""
- },
- "17": {
- "action": "After all settings are done, select the Debug
button on the bottom right corner",
- "expected_results": ""
- }
- },
- "summary":
"Relocatable_SDK_-_C_-_Build_Hello_World_ANSI_C_Autotools_Project"
- }
- },
- {
- "test": {
- "@alias":
"eclipse-plugin.eclipse-plugin.Relocatable_SDK_-_C++_-_Build_Hello_World_C++_Autotools_project",
- "author": [
- {
- "email": "[email protected]",
- "name": "[email protected]"
- }
- ],
- "execution": {
- "1": {
- "action": "Launch a QEMU of target enviroment.(Reference
to case \"ADT - Launch qemu by eclipse\") ",
- "expected_results": ""
- },
- "2": {
- "action": "Select File -> New -> Project. ",
- "expected_results": ""
- },
- "3": {
- "action": "Double click C/C++. ",
- "expected_results": ""
- },
- "4": {
- "action": "Click C or C++ Project to create the project. ",
- "expected_results": ""
- },
- "5": {
- "action": "Expand Yocto ADT Project. ",
- "expected_results": ""
- },
- "6": {
- "action": "Select Hello World ANSI C++ Autotools Project.
",
- "expected_results": ""
- },
- "7": {
- "action": "Put a name in the Project name. Do not use
hyphens as part of the name. \n \n",
- "expected_results": ""
- },
- "8": {
- "action": "Click Next.",
- "expected_results": ""
- },
- "9": {
- "action": "Add information in the Author and Copyright
notice fields.",
- "expected_results": ""
- },
- "10": {
- "action": "Click Finish. \n1",
- "expected_results": ""
- },
- "11": {
- "action": "If the \"open perspective\" prompt appears,
click \"Yes\" so that you open the C/C++ perspective. \n1",
- "expected_results": ""
- },
- "12": {
- "action": "In the Project Explorer window, right click the
project -> Reconfigure project. \n1",
- "expected_results": ""
- },
- "13": {
- "action": "In the Project Explorer window, right click the
project -> Build project. \n\n1",
- "expected_results": "under the Project files, a new folder
appears called Binaries. This indicates that the compilation have been
successful and the project binary have been created. \n"
- },
- "14": {
- "action": "Right click it again and Run as -> Run
Configurations. \n\t\t\tUnder Run Configurations expand \"C/C++ Remote
Application\". A configuration for the current project should appear. Clicking
it will display the configuration settings. \n\t\t\tin \"C/C++ Application\"
field input Remote Absolute File path for C/C++ Application. e.g.:
/home/root/myapplication \n\t\t\tIn \"Connection\" drop-down list make sure a
TCF connection is set up for your target. If not, create a new one by clicking
the New button. \n1",
- "expected_results": "step 14 to step 16 -> Build succeed
and the console outputs Hello world, you can also check the output on target."
- },
- "15": {
- "action": "After all settings are done, select the Run
button on the bottom right corner \n\n1",
- "expected_results": ""
- },
- "16": {
- "action": "Repeat the steps 14-15, but instead of using
Run Configurations use Debug Configurations: \n\t\tRight click it again and
Debug as -> Debug Configurations \n\t\tUnder Debug Configurations expand
\"C/C++ Remote Application\". A configuration for the current project should
appear. Clicking it will display the configuration settings. \n\t\tin \"C/C++
Application\" field input Remote Absolute File path for C/C++ Application.
\n\t\te.g.: /home/root/myapplication \n\t\tIn \"Connection\" drop-down list
make sure a TCF connection is set up for your target. If not, create a new one
by clicking the New button \n1",
- "expected_results": ""
- },
- "17": {
- "action": "After all settings are done, select the Debug
button on the bottom right corner",
- "expected_results": ""
- }
- },
- "summary":
"Relocatable_SDK_-_C++_-_Build_Hello_World_C++_Autotools_project"
- }
- },
- {
- "test": {
- "@alias":
"eclipse-plugin.eclipse-plugin.Build_Eclipse_Plugin_from_source",
- "author": [
- {
- "email": "[email protected]",
- "name": "[email protected]"
- }
- ],
- "execution": {
- "1": {
- "action": "Clone eclipse-poky source. \n \n - git
clone git://git.yoctoproject.org/eclipse-poky \n\n",
- "expected_results": "Eclipse plugin is successfully
installed \n\nDocumentation is there. For example if you have release
yocto-2.0.1 you will found on
http://autobuilder.yoctoproject.org/pub/releases/yocto-2.0.1/eclipse-plugin/mars/
archive with documentation like org.yocto.doc-development-$date.zip \n \n"
- },
- "2": {
- "action": "Checkout correct tag. \n\n - git checkout
<eclipse-version>/<yocto-version> \n\n",
- "expected_results": "After plugin is build you must have
4 archive in foder scripts from eclipse-poky: \n - org.yocto.bc -
mars-master-$date.zip \n - org.yocto.doc - mars-master-$date.zip -->
documentation \n - org.yocto.sdk - mars-master-$date.zip \n -
org.yocto.sdk - mars-master-$date.-archive.zip --> plugin "
- },
- "3": {
- "action": "Move to scripts/ folder. \n\n",
- "expected_results": ""
- },
- "4": {
- "action": "Run ./setup.sh \n\n",
- "expected_results": ""
- },
- "5": {
- "action": "When the script finishes, it prompts a command
to issue to build the plugin. It should look similar to the following: \n\n$
ECLIPSE_HOME=/eclipse-poky/scripts/eclipse ./build.sh /&1 | tee -a build.log
\n\nHere, the three arguments to the build script are tag name, branch for
documentation and release name. \n\n",
- "expected_results": ""
- },
- "6": {
- "action": "On an eclipse without the Yocto Plugin, select
\"Install New Software\" from Help pull-down menu \n\n",
- "expected_results": ""
- },
- "7": {
- "action": "Select Add and from the dialog choose
Archive... Look for the *archive.zip file that was built previously with the
build.sh script. Click OK. \n\n",
- "expected_results": ""
- },
- "8": {
- "action": "Select all components and proceed with
Installation of plugin. Restarting eclipse might be required.\n",
- "expected_results": ""
- }
- },
- "summary": "Build_Eclipse_Plugin_from_source"
- }
- },
- {
- "test": {
- "@alias":
"eclipse-plugin.eclipse-plugin.Eclipse_Poky_installation_and_setup",
- "author": [
- {
- "email": "[email protected]",
- "name": "[email protected]"
- }
- ],
- "execution": {
- "1": {
- "action": "Install SDK \n\ta)Download
https://autobuilder.yocto.io/pub/releases//toolchain/x86_64/poky-glibc-x86_64-core-\timage-sato-i586-toolchain-.sh
\n\tb)Run the SDK installer and accept the default installation directory ",
- "expected_results": ""
- },
- "2": {
- "action": "Install \"Eclipse IDE for C/C++ Developers\"
Oxygen release (4.7.0) \n\ta) Go to
https://www.eclipse.org/downloads/packages/all, click \"Oxygen R\" \n\tb)
Click to download the build for your OS \n\tc) Click \"Download\" button to
download from a mirror \n\td) Run \"tar xf\" to extract the downloaded archive
",
- "expected_result": ""
- },
- "3": {
- "action": "Install \"Eclipse IDE for C/C++ Developers\"
Oxygen release (4.7.0) (Continue) \n\te) Run \"eclipse/eclipse\" to start
Eclipse \n\tf) Optional step for host machine within Intel network: In Eclipse
workbench window, go to \"Window\" menu -> \"Preferences...\". \n\tg) In
\"Preferences\" dialog, go to \"General\" -> \"Network Connections\", set
\"Active Provider\" to \"Manual\". In \"Proxy \tentries\" table, select HTTP
and click \"Edit\" and enter host \"proxy-chain.intel.com\" port 911, click OK.
Repeat for HTTPS with port 912 \nClick OK to close \"Preferences\" dialog.
\n\th) Go to \"File\" menu -> \"Restart\" to restart Eclipse for proxy settings
to take effect. ",
- "expected_result": ""
- },
- "4": {
- "action": "Install Eclipse Poky plugins \n\ta) Download
https://autobuilder.yocto.io/pub/releases/<yocto-version>/eclipse-plugin/<eclipse-version>/org.yocto.sdk-development-<date>-archive.zip
\n\tb) In Eclipse workbench window, go to \"Help\" menu -> \"Install New
Software...\" \n\tc) In \"Install\" dialog, click \"Add...\" button \n\td) In
\"Add Repository\" dialog, enter \"Eclipse Poky\" for (repository) Name, click
\"Archive...\" ",
- "expected_results": ""
- },
- "5": {
- "action": "Install Eclipse Poky plugins (continue) \n\te)
In \"Repository archive\" browse dialog, select the downloaded Eclipse Poky
repository archive \n\tf) Back in \"Add Repository\" dialog, click \"OK\"
\n\tg) Back in \"Install\" dialog, make sure \"Work with:\" is set to \"Eclipse
Poky\" repository, tick \"Yocto Project \tDocumentation Plug-in\" and \"Yocto
Project SDK Plug-in\", click \"Next >\" and verify plugins/features
name/version, \tclick \"Next >\" and accept license agreement, click \"Finish\"
\n\th) If \"Security Warning\" dialog appears, click \"OK\" to install
unsigned content. \n\ti) In \"Software Updates\" dialog, click \"Yes\" to
restart Eclipse to complete Eclipse Poky plugins installation. ",
- "expected_results": ""
- },
- "6": {
- "action": "Setup Eclipse Poky to use SDK \n\ta) In
Eclipse workbench window, go to \"Window\" menu -> \"Preferences\". \n\tb) In
\"Preferences\" window, go to \"Yocto Project SDK\", in \"Cross Compiler
Options\" frame, select \"Standalone pre-\tbuilt toolchain\". ",
- "expected_results": "Eclipse Poky plugins installed and
running successfully, e.g. observe that \"Yocto Project Tools\" menu is
available on Eclipse workbench window."
- }
- },
- "summary": "Eclipse_Poky_installation_and_setup"
- }
- }
-]
\ No newline at end of file
--
2.7.4
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
