Drop backports, rebase other patches. One patch I wasn't able to rebase as upstream code changed too much: 0003-setup.py-pass-missing-libraries-to-Extension-for-mul.patch Please determine if it is still needed, produce a new version, and work with upstream to get it merged.
0001-main.c-if-OEPYTHON3HOME-is-set-use-instead-of-PYTHON.patch is removed as the use case (allowing python 2 and 3 to coexist in SDKs) is no longer relevant with Python 2.x reaching end of line and upstream has refactored the code making a rebase difficult. If needed, please re-add the patch to py2, rather than py3. Signed-off-by: Alexander Kanavin <[email protected]> --- meta/classes/python3-dir.bbclass | 2 +- ...ib-termcap-to-linker-flags-to-avoid-.patch | 14 +- ...lib-as-location-for-site-packages-an.patch | 156 ++++++++------ ...-detection-of-mips-architecture-for-.patch | 16 +- ...fig-append-STAGING_LIBDIR-python-sys.patch | 2 +- ...ON3HOME-is-set-use-instead-of-PYTHON.patch | 47 ----- ...asename-to-replace-CC-for-checking-c.patch | 37 ++-- ...runtime-test-to-get-float-byte-order.patch | 199 ------------------ ...ssing-libraries-to-Extension-for-mul.patch | 80 ------- ...report-missing-dependencies-for-disa.patch | 11 +- ...tutils-prefix-is-inside-staging-area.patch | 2 +- .../python3/avoid_warning_about_tkinter.patch | 33 ++- .../python/python3/python-config.patch | 24 ++- .../{python3_3.7.5.bb => python3_3.8.0.bb} | 28 ++- 14 files changed, 173 insertions(+), 478 deletions(-) delete mode 100644 meta/recipes-devtools/python/python3/0001-main.c-if-OEPYTHON3HOME-is-set-use-instead-of-PYTHON.patch delete mode 100644 meta/recipes-devtools/python/python3/0002-Don-t-do-runtime-test-to-get-float-byte-order.patch delete mode 100644 meta/recipes-devtools/python/python3/0003-setup.py-pass-missing-libraries-to-Extension-for-mul.patch rename meta/recipes-devtools/python/{python3_3.7.5.bb => python3_3.8.0.bb} (92%) diff --git a/meta/classes/python3-dir.bbclass b/meta/classes/python3-dir.bbclass index 7dd130bad99..d9dfa1e05ae 100644 --- a/meta/classes/python3-dir.bbclass +++ b/meta/classes/python3-dir.bbclass @@ -1,4 +1,4 @@ -PYTHON_BASEVERSION = "3.7" +PYTHON_BASEVERSION = "3.8" PYTHON_ABI = "m" PYTHON_DIR = "python${PYTHON_BASEVERSION}" PYTHON_PN = "python3" diff --git a/meta/recipes-devtools/python/python3/0001-Do-not-add-usr-lib-termcap-to-linker-flags-to-avoid-.patch b/meta/recipes-devtools/python/python3/0001-Do-not-add-usr-lib-termcap-to-linker-flags-to-avoid-.patch index 09f279ba1d7..59592821d7f 100644 --- a/meta/recipes-devtools/python/python3/0001-Do-not-add-usr-lib-termcap-to-linker-flags-to-avoid-.patch +++ b/meta/recipes-devtools/python/python3/0001-Do-not-add-usr-lib-termcap-to-linker-flags-to-avoid-.patch @@ -1,4 +1,4 @@ -From 23294c6ba6896115828293fdb7e67b47b38ba675 Mon Sep 17 00:00:00 2001 +From 039c53dd5baddec3359a05be0bff46a3b32bbb84 Mon Sep 17 00:00:00 2001 From: Alexander Kanavin <[email protected]> Date: Fri, 25 Jan 2019 19:04:13 +0100 Subject: [PATCH] Do not add /usr/lib/termcap to linker flags to avoid host @@ -12,14 +12,14 @@ Signed-off-by: Alexander Kanavin <[email protected]> 1 file changed, 1 deletion(-) diff --git a/setup.py b/setup.py -index b4357e3..fbec00d 100644 +index 20d7f35..ab18ff0 100644 --- a/setup.py +++ b/setup.py -@@ -856,7 +856,6 @@ class PyBuildExt(build_ext): +@@ -957,7 +957,6 @@ class PyBuildExt(build_ext): 'termcap'): readline_libs.append('termcap') - exts.append( Extension('readline', ['readline.c'], -- library_dirs=['/usr/lib/termcap'], - extra_link_args=readline_extra_link_args, - libraries=readline_libs) ) + self.add(Extension('readline', ['readline.c'], +- library_dirs=['/usr/lib/termcap'], + extra_link_args=readline_extra_link_args, + libraries=readline_libs)) else: diff --git a/meta/recipes-devtools/python/python3/0001-Do-not-hardcode-lib-as-location-for-site-packages-an.patch b/meta/recipes-devtools/python/python3/0001-Do-not-hardcode-lib-as-location-for-site-packages-an.patch index ea75262c4f6..112c979441f 100644 --- a/meta/recipes-devtools/python/python3/0001-Do-not-hardcode-lib-as-location-for-site-packages-an.patch +++ b/meta/recipes-devtools/python/python3/0001-Do-not-hardcode-lib-as-location-for-site-packages-an.patch @@ -1,4 +1,4 @@ -From 0fbdad1eaf541a8e92be81f39514cd249b3b0801 Mon Sep 17 00:00:00 2001 +From a078b6ff1492e848ad1055764fb9a414abaf3e12 Mon Sep 17 00:00:00 2001 From: Alexander Kanavin <[email protected]> Date: Tue, 5 Feb 2019 15:52:02 +0100 Subject: [PATCH] Do not hardcode "lib" as location for modules, site-packages @@ -11,13 +11,13 @@ Signed-off-by: Alexander Kanavin <[email protected]> Include/pythonrun.h | 2 ++ Lib/site.py | 4 ++-- Makefile.pre.in | 5 +++-- - Modules/getpath.c | 18 ++++++++++++------ + Modules/getpath.c | 22 ++++++++++++++-------- Python/getplatform.c | 10 ++++++++++ Python/sysmodule.c | 2 ++ - 6 files changed, 31 insertions(+), 10 deletions(-) + 6 files changed, 33 insertions(+), 12 deletions(-) diff --git a/Include/pythonrun.h b/Include/pythonrun.h -index 6f0c6fc..0a17edd 100644 +index 46091e0..61b2e15 100644 --- a/Include/pythonrun.h +++ b/Include/pythonrun.h @@ -7,6 +7,8 @@ @@ -28,12 +28,12 @@ index 6f0c6fc..0a17edd 100644 + #ifndef Py_LIMITED_API PyAPI_FUNC(int) PyRun_SimpleStringFlags(const char *, PyCompilerFlags *); - PyAPI_FUNC(int) PyRun_AnyFileFlags(FILE *, const char *, PyCompilerFlags *); + PyAPI_FUNC(int) PyRun_AnyFileExFlags( diff --git a/Lib/site.py b/Lib/site.py -index ffd132b..b55f6d8 100644 +index a065ab0..1d720ef 100644 --- a/Lib/site.py +++ b/Lib/site.py -@@ -334,12 +334,12 @@ def getsitepackages(prefixes=None): +@@ -335,12 +335,12 @@ def getsitepackages(prefixes=None): seen.add(prefix) if os.sep == '/': @@ -49,10 +49,10 @@ index ffd132b..b55f6d8 100644 def addsitepackages(known_paths, prefixes=None): diff --git a/Makefile.pre.in b/Makefile.pre.in -index 6e81b2f..671a20e 100644 +index 65665df..be49140 100644 --- a/Makefile.pre.in +++ b/Makefile.pre.in -@@ -142,7 +142,7 @@ LIBDIR= @libdir@ +@@ -143,7 +143,7 @@ LIBDIR= @libdir@ MANDIR= @mandir@ INCLUDEDIR= @includedir@ CONFINCLUDEDIR= $(exec_prefix)/include @@ -61,7 +61,7 @@ index 6e81b2f..671a20e 100644 ABIFLAGS= @ABIFLAGS@ # Detailed destination directories -@@ -768,6 +768,7 @@ Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile +@@ -753,6 +753,7 @@ Modules/getpath.o: $(srcdir)/Modules/getpath.c Makefile -DEXEC_PREFIX='"$(exec_prefix)"' \ -DVERSION='"$(VERSION)"' \ -DVPATH='"$(VPATH)"' \ @@ -69,7 +69,7 @@ index 6e81b2f..671a20e 100644 -o $@ $(srcdir)/Modules/getpath.c Programs/python.o: $(srcdir)/Programs/python.c -@@ -856,7 +857,7 @@ regen-opcode: +@@ -868,7 +869,7 @@ regen-symbol: $(srcdir)/Include/graminit.h Python/compile.o Python/symtable.o Python/ast_unparse.o Python/ast.o Python/future.o Parser/parsetok.o: $(srcdir)/Include/graminit.h $(srcdir)/Include/Python-ast.h Python/getplatform.o: $(srcdir)/Python/getplatform.c @@ -79,72 +79,90 @@ index 6e81b2f..671a20e 100644 Python/importdl.o: $(srcdir)/Python/importdl.c $(CC) -c $(PY_CORE_CFLAGS) -I$(DLINCLDIR) -o $@ $(srcdir)/Python/importdl.c diff --git a/Modules/getpath.c b/Modules/getpath.c -index e6a3e8e..0c62af6 100644 +index b727f66..c003e46 100644 --- a/Modules/getpath.c +++ b/Modules/getpath.c -@@ -123,6 +123,7 @@ typedef struct { - wchar_t *exec_prefix; /* EXEC_PREFIX define */ +@@ -128,6 +128,7 @@ typedef struct { + wchar_t *exec_prefix; /* EXEC_PREFIX macro */ wchar_t *lib_python; /* "lib/pythonX.Y" */ + wchar_t *multilib_python; /* "lib[suffix]/pythonX.Y" */ - wchar_t argv0_path[MAXPATHLEN+1]; - wchar_t zip_path[MAXPATHLEN+1]; /* ".../lib/pythonXY.zip" */ -@@ -314,7 +315,7 @@ search_for_prefix(const _PyCoreConfig *core_config, + int prefix_found; /* found platform independent libraries? */ + int exec_prefix_found; /* found the platform dependent libraries? */ +@@ -386,7 +387,7 @@ search_for_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, if (delim) { *delim = L'\0'; } -- joinpath(prefix, calculate->lib_python); -+ joinpath(prefix, calculate->multilib_python); - joinpath(prefix, LANDMARK); - return 1; - } -@@ -343,7 +344,7 @@ search_for_prefix(const _PyCoreConfig *core_config, - copy_absolute(prefix, calculate->argv0_path, MAXPATHLEN+1); +- status = joinpath(prefix, calculate->lib_python, prefix_len); ++ status = joinpath(prefix, calculate->multilib_python, prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; + } +@@ -444,7 +445,7 @@ search_for_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, do { - n = wcslen(prefix); -- joinpath(prefix, calculate->lib_python); -+ joinpath(prefix, calculate->multilib_python); - joinpath(prefix, LANDMARK); - if (ismodule(prefix)) { - return 1; -@@ -355,7 +356,7 @@ search_for_prefix(const _PyCoreConfig *core_config, - /* Look at configure's PREFIX */ - wcsncpy(prefix, calculate->prefix, MAXPATHLEN); - prefix[MAXPATHLEN] = L'\0'; -- joinpath(prefix, calculate->lib_python); -+ joinpath(prefix, calculate->multilib_python); - joinpath(prefix, LANDMARK); - if (ismodule(prefix)) { - return 1; -@@ -427,7 +428,7 @@ search_for_exec_prefix(const _PyCoreConfig *core_config, - wcsncpy(exec_prefix, core_config->home, MAXPATHLEN); + /* Path: <argv0_path or substring> / <lib_python> / LANDMARK */ + size_t n = wcslen(prefix); +- status = joinpath(prefix, calculate->lib_python, prefix_len); ++ status = joinpath(prefix, calculate->multilib_python, prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; } - exec_prefix[MAXPATHLEN] = L'\0'; -- joinpath(exec_prefix, calculate->lib_python); -+ joinpath(exec_prefix, calculate->multilib_python); - joinpath(exec_prefix, L"lib-dynload"); - return 1; +@@ -467,7 +468,7 @@ search_for_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, + if (safe_wcscpy(prefix, calculate->prefix, prefix_len) < 0) { + return PATHLEN_ERR(); + } +- status = joinpath(prefix, calculate->lib_python, prefix_len); ++ status = joinpath(prefix, calculate->multilib_python, prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; } -@@ -464,7 +465,7 @@ search_for_exec_prefix(const _PyCoreConfig *core_config, - copy_absolute(exec_prefix, calculate->argv0_path, MAXPATHLEN+1); +@@ -510,7 +511,7 @@ calculate_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, + if (safe_wcscpy(prefix, calculate->prefix, prefix_len) < 0) { + return PATHLEN_ERR(); + } +- status = joinpath(prefix, calculate->lib_python, prefix_len); ++ status = joinpath(prefix, calculate->multilib_python, prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; + } +@@ -635,7 +636,7 @@ search_for_exec_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, + return PATHLEN_ERR(); + } + } +- status = joinpath(exec_prefix, calculate->lib_python, exec_prefix_len); ++ status = joinpath(exec_prefix, calculate->multilib_python, exec_prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; + } +@@ -667,7 +668,7 @@ search_for_exec_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, do { - n = wcslen(exec_prefix); -- joinpath(exec_prefix, calculate->lib_python); -+ joinpath(exec_prefix, calculate->multilib_python); - joinpath(exec_prefix, L"lib-dynload"); - if (isdir(exec_prefix)) { - return 1; -@@ -476,7 +477,7 @@ search_for_exec_prefix(const _PyCoreConfig *core_config, - /* Look at configure's EXEC_PREFIX */ - wcsncpy(exec_prefix, calculate->exec_prefix, MAXPATHLEN); - exec_prefix[MAXPATHLEN] = L'\0'; -- joinpath(exec_prefix, calculate->lib_python); -+ joinpath(exec_prefix, calculate->multilib_python); - joinpath(exec_prefix, L"lib-dynload"); - if (isdir(exec_prefix)) { - return 1; -@@ -871,6 +872,10 @@ calculate_init(PyCalculatePath *calculate, + /* Path: <argv0_path or substring> / <lib_python> / "lib-dynload" */ + size_t n = wcslen(exec_prefix); +- status = joinpath(exec_prefix, calculate->lib_python, exec_prefix_len); ++ status = joinpath(exec_prefix, calculate->multilib_python, exec_prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; + } +@@ -689,7 +690,7 @@ search_for_exec_prefix(PyCalculatePath *calculate, _PyPathConfig *pathconfig, + if (safe_wcscpy(exec_prefix, calculate->exec_prefix, exec_prefix_len) < 0) { + return PATHLEN_ERR(); + } +- status = joinpath(exec_prefix, calculate->lib_python, exec_prefix_len); ++ status = joinpath(exec_prefix, calculate->multilib_python, exec_prefix_len); + if (_PyStatus_EXCEPTION(status)) { + return status; + } +@@ -928,7 +929,7 @@ calculate_argv0_path(PyCalculatePath *calculate, const wchar_t *program_full_pat + return PATHLEN_ERR(); + } + reduce(argv0_path); +- status = joinpath(argv0_path, calculate->lib_python, argv0_path_len); ++ status = joinpath(argv0_path, calculate->multilib_python, argv0_path_len); + if (_PyStatus_EXCEPTION(status)) { + PyMem_RawFree(wbuf); + return status; +@@ -1201,6 +1202,10 @@ calculate_init(PyCalculatePath *calculate, const PyConfig *config) if (!calculate->lib_python) { return DECODE_LOCALE_ERR("EXEC_PREFIX define", len); } @@ -152,10 +170,10 @@ index e6a3e8e..0c62af6 100644 + if (!calculate->multilib_python) { + return DECODE_LOCALE_ERR("EXEC_PREFIX define", len); + } - return _Py_INIT_OK(); - } -@@ -882,6 +887,7 @@ calculate_free(PyCalculatePath *calculate) + calculate->warnings = config->pathconfig_warnings; + calculate->pythonpath_env = config->pythonpath_env; +@@ -1216,6 +1221,7 @@ calculate_free(PyCalculatePath *calculate) PyMem_RawFree(calculate->prefix); PyMem_RawFree(calculate->exec_prefix); PyMem_RawFree(calculate->lib_python); @@ -182,10 +200,10 @@ index 81a0f7a..d55396b 100644 + return LIB; +} diff --git a/Python/sysmodule.c b/Python/sysmodule.c -index efe5b29..de77b17 100644 +index 5b0fb81..0dce754 100644 --- a/Python/sysmodule.c +++ b/Python/sysmodule.c -@@ -2319,6 +2319,8 @@ _PySys_BeginInit(PyObject **sysmod) +@@ -2668,6 +2668,8 @@ _PySys_InitCore(_PyRuntimeState *runtime, PyInterpreterState *interp, PyUnicode_FromString(Py_GetCopyright())); SET_SYS_FROM_STRING("platform", PyUnicode_FromString(Py_GetPlatform())); diff --git a/meta/recipes-devtools/python/python3/0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch b/meta/recipes-devtools/python/python3/0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch index e7af88654da..fe0aa8aabed 100644 --- a/meta/recipes-devtools/python/python3/0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch +++ b/meta/recipes-devtools/python/python3/0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch @@ -1,4 +1,4 @@ -From 7535c39951b9d15dd64c4669092a8582ba555466 Mon Sep 17 00:00:00 2001 +From 2581ebe3cd9686089aed223651e1b8bf0b862b48 Mon Sep 17 00:00:00 2001 From: Matthias Schoepfer <[email protected]> Date: Fri, 31 May 2019 15:34:34 +0200 Subject: [PATCH] bpo-36852: proper detection of mips architecture for soft @@ -12,15 +12,16 @@ to do this in a more autoconf/autotools manner. Upstream-Status: Submitted [https://github.com/python/cpython/pull/13196] Signed-off-by: Matthias Schoepfer <[email protected]> + --- - configure.ac | 169 ++++++--------------------------------------------- - 1 file changed, 17 insertions(+), 152 deletions(-) + configure.ac | 171 +++++---------------------------------------------- + 1 file changed, 17 insertions(+), 154 deletions(-) diff --git a/configure.ac b/configure.ac -index a7de901e08..a73e2de51b 100644 +index 0f85486..0ca7e24 100644 --- a/configure.ac +++ b/configure.ac -@@ -727,158 +727,23 @@ fi +@@ -704,160 +704,23 @@ fi MULTIARCH=$($CC --print-multiarch 2>/dev/null) AC_SUBST(MULTIARCH) @@ -163,6 +164,8 @@ index a7de901e08..a73e2de51b 100644 - i386-gnu -#elif defined(__APPLE__) - darwin +-#elif defined(__VXWORKS__) +- vxworks -#else -# error unknown platform triplet -#endif @@ -196,6 +199,3 @@ index a7de901e08..a73e2de51b 100644 if test x$PLATFORM_TRIPLET != x && test x$MULTIARCH != x; then if test x$PLATFORM_TRIPLET != x$MULTIARCH; then --- -2.21.0 - diff --git a/meta/recipes-devtools/python/python3/0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch b/meta/recipes-devtools/python/python3/0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch index 1709011be8a..ee37f6bd52d 100644 --- a/meta/recipes-devtools/python/python3/0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch +++ b/meta/recipes-devtools/python/python3/0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch @@ -1,4 +1,4 @@ -From eff903c600f4c40f5753e95ab1557126fc6e0c9c Mon Sep 17 00:00:00 2001 +From cf676775109c0a7fb38058bb60b453ff8f1a166b Mon Sep 17 00:00:00 2001 From: Alexander Kanavin <[email protected]> Date: Thu, 31 Jan 2019 16:46:30 +0100 Subject: [PATCH] distutils/sysconfig: append diff --git a/meta/recipes-devtools/python/python3/0001-main.c-if-OEPYTHON3HOME-is-set-use-instead-of-PYTHON.patch b/meta/recipes-devtools/python/python3/0001-main.c-if-OEPYTHON3HOME-is-set-use-instead-of-PYTHON.patch deleted file mode 100644 index a146c747f83..00000000000 --- a/meta/recipes-devtools/python/python3/0001-main.c-if-OEPYTHON3HOME-is-set-use-instead-of-PYTHON.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 5ce3ac59531828ff682646fbba59b2126b28a8aa Mon Sep 17 00:00:00 2001 -From: Jaewon Lee <[email protected]> -Date: Thu, 25 Apr 2019 15:34:26 -0700 -Subject: [PATCH] main.c: if OEPYTHON3HOME is set use instead of PYTHONHOME - -There is one variable PYTHONHOME to determine where libraries are coming -from for both python2 and python3. This becomes an issue if only one has -libraries in the specified PYTHONHOME path, but they are using the same -PYTHONHOME. Creating another variable OEPYTHON3HOME to allow for a way -to set a different path for python3 - -Signed-off-by: Jaewon Lee <[email protected]> - -Upstream-Status: Inappropriate [OE specific configuration] - ---- - Modules/main.c | 17 +++++++++++++---- - 1 file changed, 13 insertions(+), 4 deletions(-) - -diff --git a/Modules/main.c b/Modules/main.c -index acc59c6..407085a 100644 ---- a/Modules/main.c -+++ b/Modules/main.c -@@ -1834,10 +1834,19 @@ config_init_home(_PyCoreConfig *config) - } - return _Py_INIT_OK(); - } -- -- int res = config_get_env_var_dup(&home, L"PYTHONHOME", "PYTHONHOME"); -- if (res < 0) { -- return DECODE_LOCALE_ERR("PYTHONHOME", res); -+ int res; -+ const char *oepython3home = config_get_env_var("OEPYTHON3HOME"); -+ if (oepython3home) { -+ res = config_get_env_var_dup(&home, L"OEPYTHON3HOME", "OEPYTHON3HOME"); -+ if (res < 0) { -+ return DECODE_LOCALE_ERR("OEPYTHON3HOME", res); -+ } -+ } -+ else { -+ res = config_get_env_var_dup(&home, L"PYTHONHOME", "PYTHONHOME"); -+ if (res < 0) { -+ return DECODE_LOCALE_ERR("PYTHONHOME", res); -+ } - } - config->home = home; - return _Py_INIT_OK(); diff --git a/meta/recipes-devtools/python/python3/0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch b/meta/recipes-devtools/python/python3/0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch index a0ea897f4e8..fb10ca94b31 100644 --- a/meta/recipes-devtools/python/python3/0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch +++ b/meta/recipes-devtools/python/python3/0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch @@ -1,4 +1,4 @@ -From 2645317fef09afe31b01bb2c1d4fe5b9afdbb11a Mon Sep 17 00:00:00 2001 +From 994783da5c21cab81b6589ed2d4275e665a946f9 Mon Sep 17 00:00:00 2001 From: Changqing Li <[email protected]> Date: Mon, 22 Oct 2018 15:19:51 +0800 Subject: [PATCH] python3: use cc_basename to replace CC for checking compiler @@ -21,12 +21,13 @@ Signed-off-by: Li Zhou <[email protected]> patch originally from Li Zhou, I just rework it to new version Signed-off-by: Changqing Li <[email protected]> + --- configure.ac | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/configure.ac b/configure.ac -index a7de901..4a3681f 100644 +index a189d42..0f85486 100644 --- a/configure.ac +++ b/configure.ac @@ -54,6 +54,7 @@ AC_CONFIG_HEADER(pyconfig.h) @@ -37,7 +38,7 @@ index a7de901..4a3681f 100644 # pybuilddir.txt will be created by --generate-posix-vars in the Makefile rm -f pybuilddir.txt -@@ -695,7 +696,7 @@ AC_MSG_RESULT($with_cxx_main) +@@ -671,7 +672,7 @@ AC_MSG_RESULT($with_cxx_main) preset_cxx="$CXX" if test -z "$CXX" then @@ -46,7 +47,7 @@ index a7de901..4a3681f 100644 gcc) AC_PATH_TOOL(CXX, [g++], [g++], [notfound]) ;; cc) AC_PATH_TOOL(CXX, [c++], [c++], [notfound]) ;; clang|*/clang) AC_PATH_TOOL(CXX, [clang++], [clang++], [notfound]) ;; -@@ -979,7 +980,7 @@ rmdir CaseSensitiveTestDir +@@ -957,7 +958,7 @@ rmdir CaseSensitiveTestDir case $ac_sys_system in hp*|HP*) @@ -55,7 +56,7 @@ index a7de901..4a3681f 100644 cc|*/cc) CC="$CC -Ae";; esac;; esac -@@ -1336,7 +1337,7 @@ else +@@ -1335,7 +1336,7 @@ else fi], [AC_MSG_RESULT(no)]) if test "$Py_LTO" = 'true' ; then @@ -64,7 +65,7 @@ index a7de901..4a3681f 100644 *clang*) AC_SUBST(LLVM_AR) AC_PATH_TOOL(LLVM_AR, llvm-ar, '', ${llvm_path}) -@@ -1426,7 +1427,7 @@ then +@@ -1425,7 +1426,7 @@ then fi fi LLVM_PROF_ERR=no @@ -73,16 +74,16 @@ index a7de901..4a3681f 100644 *clang*) # Any changes made here should be reflected in the GCC+Darwin case below PGO_PROF_GEN_FLAG="-fprofile-instr-generate" -@@ -1500,7 +1501,7 @@ then - WRAP="-fwrapv" - fi +@@ -1486,7 +1487,7 @@ esac + # compiler and platform. BASECFLAGS tweaks need to be made even if the + # user set OPT. -- case $CC in -+ case $cc_basename in - *clang*) - cc_is_clang=1 - ;; -@@ -1623,7 +1624,7 @@ yes) +-case $CC in ++case $cc_basename in + *clang*) + cc_is_clang=1 + ;; +@@ -1622,7 +1623,7 @@ yes) # ICC doesn't recognize the option, but only emits a warning ## XXX does it emit an unused result warning and can it be disabled? @@ -91,7 +92,7 @@ index a7de901..4a3681f 100644 *icc*) ac_cv_disable_unused_result_warning=no ;; -@@ -1965,7 +1966,7 @@ yes) +@@ -1943,7 +1944,7 @@ yes) esac # ICC needs -fp-model strict or floats behave badly @@ -100,7 +101,7 @@ index a7de901..4a3681f 100644 *icc*) CFLAGS_NODIST="$CFLAGS_NODIST -fp-model strict" ;; -@@ -2727,7 +2728,7 @@ then +@@ -2711,7 +2712,7 @@ then then LINKFORSHARED="-Wl,--export-dynamic" fi;; @@ -109,7 +110,7 @@ index a7de901..4a3681f 100644 *gcc*) if $CC -Xlinker --help 2>&1 | grep export-dynamic >/dev/null then -@@ -5429,7 +5430,7 @@ if test "$have_gcc_asm_for_x87" = yes; then +@@ -5362,7 +5363,7 @@ if test "$have_gcc_asm_for_x87" = yes; then # Some versions of gcc miscompile inline asm: # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=46491 # http://gcc.gnu.org/ml/gcc/2010-11/msg00366.html diff --git a/meta/recipes-devtools/python/python3/0002-Don-t-do-runtime-test-to-get-float-byte-order.patch b/meta/recipes-devtools/python/python3/0002-Don-t-do-runtime-test-to-get-float-byte-order.patch deleted file mode 100644 index 58ab709028e..00000000000 --- a/meta/recipes-devtools/python/python3/0002-Don-t-do-runtime-test-to-get-float-byte-order.patch +++ /dev/null @@ -1,199 +0,0 @@ -From fa96a7fd19e17b9c6b4dd01c3c3774fb382dddc6 Mon Sep 17 00:00:00 2001 -From: Ross Burton <[email protected]> -Date: Wed, 5 Sep 2018 11:45:52 +0100 -Subject: [PATCH] Don't do runtime test to get float byte order - -Python uses AC_RUN_IFELSE to determine the byte order for floats and doubles, -and falls back onto "I don't know" if it can't run code. This results in -crippled floating point numbers in Python, and the regression tests fail. - -Instead of running code, take a macro from autoconf-archive which compiles C -with a special double in which has an ASCII representation, and then greps the -binary to identify the format. - -Upstream-Status: Backport [2a9c3805ddedf282881ef7811a561c70b74f80b1] -Signed-off-by: Ross Burton <[email protected]> ---- - configure.ac | 72 +++------------------------ - m4/ax_c_float_words_bigendian.m4 | 83 ++++++++++++++++++++++++++++++++ - 2 files changed, 90 insertions(+), 65 deletions(-) - create mode 100644 m4/ax_c_float_words_bigendian.m4 - -diff --git a/configure.ac b/configure.ac -index 4a3681f..4ab19a6 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -4328,77 +4328,19 @@ fi - # * Check for various properties of floating point * - # ************************************************** - --AC_MSG_CHECKING(whether C doubles are little-endian IEEE 754 binary64) --AC_CACHE_VAL(ac_cv_little_endian_double, [ --AC_RUN_IFELSE([AC_LANG_SOURCE([[ --#include <string.h> --int main() { -- double x = 9006104071832581.0; -- if (memcmp(&x, "\x05\x04\x03\x02\x01\xff\x3f\x43", 8) == 0) -- return 0; -- else -- return 1; --} --]])], --[ac_cv_little_endian_double=yes], --[ac_cv_little_endian_double=no], --[ac_cv_little_endian_double=no])]) --AC_MSG_RESULT($ac_cv_little_endian_double) --if test "$ac_cv_little_endian_double" = yes --then -- AC_DEFINE(DOUBLE_IS_LITTLE_ENDIAN_IEEE754, 1, -- [Define if C doubles are 64-bit IEEE 754 binary format, stored -- with the least significant byte first]) --fi -- --AC_MSG_CHECKING(whether C doubles are big-endian IEEE 754 binary64) --AC_CACHE_VAL(ac_cv_big_endian_double, [ --AC_RUN_IFELSE([AC_LANG_SOURCE([[ --#include <string.h> --int main() { -- double x = 9006104071832581.0; -- if (memcmp(&x, "\x43\x3f\xff\x01\x02\x03\x04\x05", 8) == 0) -- return 0; -- else -- return 1; --} --]])], --[ac_cv_big_endian_double=yes], --[ac_cv_big_endian_double=no], --[ac_cv_big_endian_double=no])]) --AC_MSG_RESULT($ac_cv_big_endian_double) --if test "$ac_cv_big_endian_double" = yes -+AX_C_FLOAT_WORDS_BIGENDIAN -+if test "$ax_cv_c_float_words_bigendian" = "yes" - then - AC_DEFINE(DOUBLE_IS_BIG_ENDIAN_IEEE754, 1, - [Define if C doubles are 64-bit IEEE 754 binary format, stored - with the most significant byte first]) --fi -- --# Some ARM platforms use a mixed-endian representation for doubles. --# While Python doesn't currently have full support for these platforms --# (see e.g., issue 1762561), we can at least make sure that float <-> string --# conversions work. --AC_MSG_CHECKING(whether C doubles are ARM mixed-endian IEEE 754 binary64) --AC_CACHE_VAL(ac_cv_mixed_endian_double, [ --AC_RUN_IFELSE([AC_LANG_SOURCE([[ --#include <string.h> --int main() { -- double x = 9006104071832581.0; -- if (memcmp(&x, "\x01\xff\x3f\x43\x05\x04\x03\x02", 8) == 0) -- return 0; -- else -- return 1; --} --]])], --[ac_cv_mixed_endian_double=yes], --[ac_cv_mixed_endian_double=no], --[ac_cv_mixed_endian_double=no])]) --AC_MSG_RESULT($ac_cv_mixed_endian_double) --if test "$ac_cv_mixed_endian_double" = yes -+elif test "$ax_cv_c_float_words_bigendian" = "no" - then -- AC_DEFINE(DOUBLE_IS_ARM_MIXED_ENDIAN_IEEE754, 1, -+ AC_DEFINE(DOUBLE_IS_LITTLE_ENDIAN_IEEE754, 1, - [Define if C doubles are 64-bit IEEE 754 binary format, stored -- in ARM mixed-endian order (byte order 45670123)]) -+ with the least significant byte first]) -+else -+ AC_MSG_ERROR([Cannot identify floating point byte order]) - fi - - # The short float repr introduced in Python 3.1 requires the -diff --git a/m4/ax_c_float_words_bigendian.m4 b/m4/ax_c_float_words_bigendian.m4 -new file mode 100644 -index 0000000..216b90d ---- /dev/null -+++ b/m4/ax_c_float_words_bigendian.m4 -@@ -0,0 +1,83 @@ -+# =============================================================================== -+# https://www.gnu.org/software/autoconf-archive/ax_c_float_words_bigendian.html -+# =============================================================================== -+# -+# SYNOPSIS -+# -+# AX_C_FLOAT_WORDS_BIGENDIAN([ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-UNKNOWN]) -+# -+# DESCRIPTION -+# -+# Checks the ordering of words within a multi-word float. This check is -+# necessary because on some systems (e.g. certain ARM systems), the float -+# word ordering can be different from the byte ordering. In a multi-word -+# float context, "big-endian" implies that the word containing the sign -+# bit is found in the memory location with the lowest address. This -+# implementation was inspired by the AC_C_BIGENDIAN macro in autoconf. -+# -+# The endianness is detected by first compiling C code that contains a -+# special double float value, then grepping the resulting object file for -+# certain strings of ASCII values. The double is specially crafted to have -+# a binary representation that corresponds with a simple string. In this -+# implementation, the string "noonsees" was selected because the -+# individual word values ("noon" and "sees") are palindromes, thus making -+# this test byte-order agnostic. If grep finds the string "noonsees" in -+# the object file, the target platform stores float words in big-endian -+# order. If grep finds "seesnoon", float words are in little-endian order. -+# If neither value is found, the user is instructed to specify the -+# ordering. -+# -+# LICENSE -+# -+# Copyright (c) 2008 Daniel Amelang <[email protected]> -+# -+# Copying and distribution of this file, with or without modification, are -+# permitted in any medium without royalty provided the copyright notice -+# and this notice are preserved. This file is offered as-is, without any -+# warranty. -+ -+#serial 11 -+ -+AC_DEFUN([AX_C_FLOAT_WORDS_BIGENDIAN], -+ [AC_CACHE_CHECK(whether float word ordering is bigendian, -+ ax_cv_c_float_words_bigendian, [ -+ -+ax_cv_c_float_words_bigendian=unknown -+AC_COMPILE_IFELSE([AC_LANG_SOURCE([[ -+ -+double d = 90904234967036810337470478905505011476211692735615632014797120844053488865816695273723469097858056257517020191247487429516932130503560650002327564517570778480236724525140520121371739201496540132640109977779420565776568942592.0; -+ -+]])], [ -+ -+if grep noonsees conftest.$ac_objext >/dev/null ; then -+ ax_cv_c_float_words_bigendian=yes -+fi -+if grep seesnoon conftest.$ac_objext >/dev/null ; then -+ if test "$ax_cv_c_float_words_bigendian" = unknown; then -+ ax_cv_c_float_words_bigendian=no -+ else -+ ax_cv_c_float_words_bigendian=unknown -+ fi -+fi -+ -+])]) -+ -+case $ax_cv_c_float_words_bigendian in -+ yes) -+ m4_default([$1], -+ [AC_DEFINE([FLOAT_WORDS_BIGENDIAN], 1, -+ [Define to 1 if your system stores words within floats -+ with the most significant word first])]) ;; -+ no) -+ $2 ;; -+ *) -+ m4_default([$3], -+ [AC_MSG_ERROR([ -+ -+Unknown float word ordering. You need to manually preset -+ax_cv_c_float_words_bigendian=no (or yes) according to your system. -+ -+ ])]) ;; -+esac -+ -+])# AX_C_FLOAT_WORDS_BIGENDIAN diff --git a/meta/recipes-devtools/python/python3/0003-setup.py-pass-missing-libraries-to-Extension-for-mul.patch b/meta/recipes-devtools/python/python3/0003-setup.py-pass-missing-libraries-to-Extension-for-mul.patch deleted file mode 100644 index b9d5bc9c516..00000000000 --- a/meta/recipes-devtools/python/python3/0003-setup.py-pass-missing-libraries-to-Extension-for-mul.patch +++ /dev/null @@ -1,80 +0,0 @@ -From b881a79adcd4ae5ac8fe4f49d0fc77c47f777919 Mon Sep 17 00:00:00 2001 -From: Hongxu Jia <[email protected]> -Date: Fri, 4 Aug 2017 11:16:14 +0800 -Subject: [PATCH] setup.py: pass missing libraries to Extension for - multiprocessing module - -In the following commit: -... -commit e711cafab13efc9c1fe6c5cd75826401445eb585 -Author: Benjamin Peterson <[email protected]> -Date: Wed Jun 11 16:44:04 2008 +0000 - - Merged revisions 64104,64117 via svnmerge from - svn+ssh://[email protected]/python/trunk -... -(see diff in setup.py) -It assigned libraries for multiprocessing module according -the host_platform, but not pass it to Extension. - -In glibc, the following commit caused two definition of -sem_getvalue are different. -https://sourceware.org/git/?p=glibc.git;a=commit;h=042e1521c794a945edc43b5bfa7e69ad70420524 -(see diff in nptl/sem_getvalue.c for detail) -`__new_sem_getvalue' is the latest sem_getvalue@@GLIBC_2.1 -and `__old_sem_getvalue' is to compat the old version -sem_getvalue@GLIBC_2.0. - -To build python for embedded Linux systems: -http://www.yoctoproject.org/docs/2.3.1/yocto-project-qs/yocto-project-qs.html -If not explicitly link to library pthread (-lpthread), it will -load glibc's sem_getvalue randomly at runtime. - -Such as build python on linux x86_64 host and run the python -on linux x86_32 target. If not link library pthread, it caused -multiprocessing bounded semaphore could not work correctly. -... ->>> import multiprocessing ->>> pool_sema = multiprocessing.BoundedSemaphore(value=1) ->>> pool_sema.acquire() -True ->>> pool_sema.release() -Traceback (most recent call last): - File "<stdin>", line 1, in <module> -ValueError: semaphore or lock released too many times -... - -And the semaphore issue also caused multiprocessing.Queue().put() hung. - -Upstream-Status: Submitted [https://github.com/python/cpython/pull/2999] - -Signed-off-by: Hongxu Jia <[email protected]> ---- - setup.py | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - -diff --git a/setup.py b/setup.py -index b7a36a6..658ead3 100644 ---- a/setup.py -+++ b/setup.py -@@ -1584,8 +1584,10 @@ class PyBuildExt(build_ext): - elif host_platform.startswith('netbsd'): - macros = dict() - libraries = [] -- -- else: # Linux and other unices -+ elif host_platform.startswith(('linux')): -+ macros = dict() -+ libraries = ['pthread'] -+ else: # Other unices - macros = dict() - libraries = ['rt'] - -@@ -1603,6 +1605,7 @@ class PyBuildExt(build_ext): - - exts.append ( Extension('_multiprocessing', multiprocessing_srcs, - define_macros=list(macros.items()), -+ libraries=libraries, - include_dirs=["Modules/_multiprocessing"])) - # End multiprocessing - diff --git a/meta/recipes-devtools/python/python3/0017-setup.py-do-not-report-missing-dependencies-for-disa.patch b/meta/recipes-devtools/python/python3/0017-setup.py-do-not-report-missing-dependencies-for-disa.patch index c15295c034c..4bd98f62fd6 100644 --- a/meta/recipes-devtools/python/python3/0017-setup.py-do-not-report-missing-dependencies-for-disa.patch +++ b/meta/recipes-devtools/python/python3/0017-setup.py-do-not-report-missing-dependencies-for-disa.patch @@ -1,4 +1,4 @@ -From e3b59cb9658e1d3efa3535840939a0fa92a70a5a Mon Sep 17 00:00:00 2001 +From a2dd127b4163aff6cc35af0d0251321964232ad4 Mon Sep 17 00:00:00 2001 From: Alexander Kanavin <[email protected]> Date: Mon, 7 Oct 2019 13:22:14 +0200 Subject: [PATCH] setup.py: do not report missing dependencies for disabled @@ -10,22 +10,23 @@ build completeness checker which relies on the report. Upstream-Status: Inappropriate [oe-core specific] Signed-off-by: Alexander Kanavin <[email protected]> + --- setup.py | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/setup.py b/setup.py -index 4b53668..0097643 100644 +index 7691258..ec3f2a4 100644 --- a/setup.py +++ b/setup.py -@@ -365,6 +365,10 @@ class PyBuildExt(build_ext): +@@ -408,6 +408,10 @@ class PyBuildExt(build_ext): print("%-*s %-*s %-*s" % (longest, e, longest, f, longest, g)) + # There is no need to report missing module dependencies, + # if the modules have been disabled in the first place. -+ missing = list(set(missing) - set(sysconf_dis)) ++ self.missing = list(set(self.missing) - set(sysconf_dis)) + - if missing: + if self.missing: print() print("Python build finished successfully!") diff --git a/meta/recipes-devtools/python/python3/12-distutils-prefix-is-inside-staging-area.patch b/meta/recipes-devtools/python/python3/12-distutils-prefix-is-inside-staging-area.patch index d49604ba4d9..219b3551b8b 100644 --- a/meta/recipes-devtools/python/python3/12-distutils-prefix-is-inside-staging-area.patch +++ b/meta/recipes-devtools/python/python3/12-distutils-prefix-is-inside-staging-area.patch @@ -1,4 +1,4 @@ -From a274ba778838824efcacaba57c415b7262f779ec Mon Sep 17 00:00:00 2001 +From 93b2c26467b0ea9a18c178e4e1371d52e917a68b Mon Sep 17 00:00:00 2001 From: Khem Raj <[email protected]> Date: Tue, 14 May 2013 15:00:26 -0700 Subject: [PATCH] python3: Add target and native recipes diff --git a/meta/recipes-devtools/python/python3/avoid_warning_about_tkinter.patch b/meta/recipes-devtools/python/python3/avoid_warning_about_tkinter.patch index 24e67b4ca14..184540e794c 100644 --- a/meta/recipes-devtools/python/python3/avoid_warning_about_tkinter.patch +++ b/meta/recipes-devtools/python/python3/avoid_warning_about_tkinter.patch @@ -1,4 +1,4 @@ -From fead48c8b501a8d7c3db21df2e599f90f38f11d3 Mon Sep 17 00:00:00 2001 +From ba7202700578d435b07cfdfb7b57e83185752800 Mon Sep 17 00:00:00 2001 From: Andrei Gherzan <[email protected]> Date: Mon, 28 Jan 2019 15:57:54 +0000 Subject: [PATCH] _tkinter module needs tk module along with tcl. tk is not yet @@ -11,26 +11,21 @@ Also simply disable the tk module since its not in DEPENDS. Signed-off-by: Andrei Gherzan <[email protected]> --- - setup.py | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) + setup.py | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/setup.py b/setup.py -index fbec00d..b7a36a6 100644 +index ab18ff0..7691258 100644 --- a/setup.py +++ b/setup.py -@@ -1623,10 +1623,12 @@ class PyBuildExt(build_ext): - self.extensions.extend(exts) +@@ -1706,8 +1706,8 @@ class PyBuildExt(build_ext): + self.detect_decimal() + self.detect_ctypes() + self.detect_multiprocessing() +- if not self.detect_tkinter(): +- self.missing.append('_tkinter') ++# if not self.detect_tkinter(): ++# self.missing.append('_tkinter') + self.detect_uuid() - # Call the method for detecting whether _tkinter can be compiled -- self.detect_tkinter(inc_dirs, lib_dirs) -+ # self.detect_tkinter(inc_dirs, lib_dirs) - -- if '_tkinter' not in [e.name for e in self.extensions]: -- missing.append('_tkinter') -+ # tkinter module will not be avalaible as yocto -+ # doesn't have tk integrated (yet) -+ #if '_tkinter' not in [e.name for e in self.extensions]: -+ # missing.append('_tkinter') - - # Build the _uuid module if possible - uuid_incs = find_file("uuid.h", inc_dirs, ["/usr/include/uuid"]) + ## # Uncomment these lines if you want to play with xxmodule.c diff --git a/meta/recipes-devtools/python/python3/python-config.patch b/meta/recipes-devtools/python/python3/python-config.patch index f23b8b7df06..c8a8f3d4aa3 100644 --- a/meta/recipes-devtools/python/python3/python-config.patch +++ b/meta/recipes-devtools/python/python3/python-config.patch @@ -1,4 +1,7 @@ -python-config: Revert to using distutils.sysconfig +From 07df0ae0d70cba6d1847fe1c24a71063930bec60 Mon Sep 17 00:00:00 2001 +From: Tyler Hall <[email protected]> +Date: Sun, 4 May 2014 20:06:43 -0400 +Subject: [PATCH] python-config: Revert to using distutils.sysconfig The newer sysconfig module shares some code with distutils.sysconfig, but the same modifications as in @@ -12,11 +15,16 @@ Upstream-Status: Inappropriate [Embedded Specific] Signed-off-by: Tyler Hall <[email protected]> : -Index: Python-3.3.3/Misc/python-config.in -=================================================================== ---- Python-3.3.3.orig/Misc/python-config.in -+++ Python-3.3.3/Misc/python-config.in -@@ -4,7 +4,7 @@ + +--- + Misc/python-config.in | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +diff --git a/Misc/python-config.in b/Misc/python-config.in +index 727c4a8..c702829 100644 +--- a/Misc/python-config.in ++++ b/Misc/python-config.in +@@ -6,7 +6,7 @@ import getopt import os import sys @@ -24,8 +32,8 @@ Index: Python-3.3.3/Misc/python-config.in +from distutils import sysconfig valid_opts = ['prefix', 'exec-prefix', 'includes', 'libs', 'cflags', - 'ldflags', 'extension-suffix', 'help', 'abiflags', 'configdir'] -@@ -32,14 +32,14 @@ if '--help' in opt_flags: + 'ldflags', 'extension-suffix', 'help', 'abiflags', 'configdir', +@@ -35,14 +35,14 @@ if '--help' in opt_flags: for opt in opt_flags: if opt == '--prefix': diff --git a/meta/recipes-devtools/python/python3_3.7.5.bb b/meta/recipes-devtools/python/python3_3.8.0.bb similarity index 92% rename from meta/recipes-devtools/python/python3_3.7.5.bb rename to meta/recipes-devtools/python/python3_3.8.0.bb index 90914f90532..f6e6e5ebb2b 100644 --- a/meta/recipes-devtools/python/python3_3.7.5.bb +++ b/meta/recipes-devtools/python/python3_3.8.0.bb @@ -19,8 +19,6 @@ SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \ file://0001-Makefile.pre-use-qemu-wrapper-when-gathering-profile.patch \ file://0001-Do-not-hardcode-lib-as-location-for-site-packages-an.patch \ file://0001-python3-use-cc_basename-to-replace-CC-for-checking-c.patch \ - file://0002-Don-t-do-runtime-test-to-get-float-byte-order.patch \ - file://0003-setup.py-pass-missing-libraries-to-Extension-for-mul.patch \ file://0001-Lib-sysconfig.py-fix-another-place-where-lib-is-hard.patch \ file://0001-Makefile-fix-Issue36464-parallel-build-race-problem.patch \ file://0001-bpo-36852-proper-detection-of-mips-architecture-for-.patch \ @@ -35,19 +33,16 @@ SRC_URI_append_class-native = " \ file://0001-distutils-sysconfig-append-STAGING_LIBDIR-python-sys.patch \ file://12-distutils-prefix-is-inside-staging-area.patch \ " -SRC_URI_append_class-nativesdk = " \ - file://0001-main.c-if-OEPYTHON3HOME-is-set-use-instead-of-PYTHON.patch \ - " -SRC_URI[md5sum] = "08ed8030b1183107c48f2092e79a87e2" -SRC_URI[sha256sum] = "e85a76ea9f3d6c485ec1780fca4e500725a4a7bbc63c78ebc44170de9b619d94" +SRC_URI[md5sum] = "dbac8df9d8b9edc678d0f4cacdb7dbb0" +SRC_URI[sha256sum] = "b356244e13fb5491da890b35b13b2118c3122977c2cd825e3eb6e7d462030d84" # exclude pre-releases for both python 2.x and 3.x UPSTREAM_CHECK_REGEX = "[Pp]ython-(?P<pver>\d+(\.\d+)+).tar" CVE_PRODUCT = "python" -PYTHON_MAJMIN = "3.7" +PYTHON_MAJMIN = "3.8" PYTHON_BINABI = "${PYTHON_MAJMIN}m" S = "${WORKDIR}/Python-${PV}" @@ -59,8 +54,8 @@ inherit autotools pkgconfig qemu ptest multilib_header update-alternatives MULTILIB_SUFFIX = "${@d.getVar('base_libdir',1).split('/')[-1]}" ALTERNATIVE_${PN}-dev = "python3-config" -ALTERNATIVE_LINK_NAME[python3-config] = "${bindir}/python${PYTHON_BINABI}-config" -ALTERNATIVE_TARGET[python3-config] = "${bindir}/python${PYTHON_BINABI}-config-${MULTILIB_SUFFIX}" +ALTERNATIVE_LINK_NAME[python3-config] = "${bindir}/python${PYTHON_MAJMIN}-config" +ALTERNATIVE_TARGET[python3-config] = "${bindir}/python${PYTHON_MAJMIN}-config-${MULTILIB_SUFFIX}" DEPENDS = "bzip2-replacement-native libffi bzip2 openssl sqlite3 zlib virtual/libintl xz virtual/crypt util-linux libtirpc libnsl2" @@ -131,7 +126,7 @@ do_install_prepend() { } do_install_append_class-target() { - oe_multilib_header python${PYTHON_BINABI}/pyconfig.h + oe_multilib_header python${PYTHON_MAJMIN}/pyconfig.h } do_install_append_class-native() { @@ -161,7 +156,7 @@ do_install_append() { } do_install_append_class-nativesdk () { - create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} OEPYTHON3HOME='${prefix}' TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo' PYTHONNOUSERSITE='1' + create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo' PYTHONNOUSERSITE='1' } SSTATE_SCAN_FILES += "Makefile _sysconfigdata.py" @@ -177,7 +172,7 @@ py_package_preprocess () { -e 's:${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}::g' \ ${PKGD}/${prefix}/lib/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}*/Makefile \ ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata*.py \ - ${PKGD}/${bindir}/python${PYTHON_BINABI}-config + ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config # Reformat _sysconfigdata after modifying it so that it remains # reproducible @@ -196,7 +191,7 @@ py_package_preprocess () { -c "from py_compile import compile; compile('$sysconfigfile', optimize=2)" cd - - mv ${PKGD}/${bindir}/python${PYTHON_BINABI}-config ${PKGD}/${bindir}/python${PYTHON_BINABI}-config-${MULTILIB_SUFFIX} + mv ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config ${PKGD}/${bindir}/python${PYTHON_MAJMIN}-config-${MULTILIB_SUFFIX} #Remove the unneeded copy of target sysconfig data rm -rf ${PKGD}/${libdir}/python-sysconfigdata @@ -319,7 +314,7 @@ RPROVIDES_${PN}-venv += "python3-pyvenv" # package libpython3 PACKAGES =+ "libpython3 libpython3-staticdev" FILES_libpython3 = "${libdir}/libpython*.so.*" -FILES_libpython3-staticdev += "${prefix}/lib/python${PYTHON_MAJMIN}/config-${PYTHON_BINABI}-*/libpython${PYTHON_BINABI}.a" +FILES_libpython3-staticdev += "${prefix}/lib/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}-*/libpython${PYTHON_MAJMIN}.a" INSANE_SKIP_${PN}-dev += "dev-elf" # catch all the rest (unsorted) @@ -338,3 +333,6 @@ RDEPENDS_${PN}-ptest_append_libc-glibc = " locale-base-tr-tr.iso-8859-9" RDEPENDS_${PN}-tkinter += "${@bb.utils.contains('PACKAGECONFIG', 'tk', 'tk tk-lib', '', d)}" RDEPENDS_${PN}-dev = "" +RDEPENDS_${PN}-tests_append_class-target = " bash" +RDEPENDS_${PN}-tests_append_class-nativesdk = " bash" + -- 2.17.1 -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
