On 15/01/2020 01:25, Maxime Roussin-Bélanger wrote:
I have modified the recipe to use manpages, but it is impossible to run
a build from master, because
of my python3 pyenv setup. I had to add
+DEPENDS = "python3-native"
to ca-certificates, without it was impossible to go through the
do_configure step. It was using the python3
from my system instead of the one provided by yocto? I am a bit lost here.
What do you think? Should it have python3-native? There is a fairly
recent patch
to use python3 `file://0001-certdata2pem.py-use-python3.patch`
We assume that the host has a Python 3, which is fair as Bitbake needs
Python 3. The ca-certificates recipe should be able to use the same
Python 3 interpretter, which was found during a search of $PATH and
linked in tmp/hosttools/python3.
If your host Py setup is complicated, then the hosttools is where to
look for a fix.
Ross
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
