Hi Bruce, On Thu, 23 Jul 2020 at 13:27, Bruce Ashfield <bruce.ashfi...@gmail.com> wrote:
> On Thu, Jul 23, 2020 at 5:34 AM Ryan Harkin <ryan.har...@linaro.org> > wrote: > > > > Hi Bruce, Steve, > > > > Thanks for your replies and the help. > > > > On Thu, 23 Jul 2020 at 04:33, Steve Sakoman <st...@sakoman.com> wrote: > >> > >> On Wed, Jul 22, 2020 at 3:58 PM Bruce Ashfield < > bruce.ashfi...@gmail.com> wrote: > >> > > >> > On Wed, Jul 22, 2020 at 5:27 PM Ryan Harkin <ryan.har...@linaro.org> > wrote: > >> > > > >> > > Just an FYI, but when this was submitted, my imx7s-warp builds > began to fail when building linux-fslc from meta-freescale / > meta-freescale-3rdparty. > >> > > > >> > > I'm not sure why yet, I've only discovered the problem, but I > thought I'd report it in case anyone else sees the problem. > >> > > > >> > > >> > Someone already sent a dunfell backport request for a follow up patch > to this. > >> > > >> > It went to the poky list, but I just replied to it and copied oe-core. > >> > >> Both patches are already in dunfell! > >> > >> > https://git.openembedded.org/openembedded-core/commit/?h=dunfell&id=7ecc81baeacaa1149a4947791200e8819c3df677 > >> > https://git.openembedded.org/openembedded-core/commit/?h=dunfell&id=11089e06bfb3d0defb52825ffba978d085385569 > > > > > > Yes, they are present. I guess I should have checked the error messages > more closely during git bisect rather than stopping as soon as the build > failed. > > > > After Bruce's 7ecc81baea patch, I see this error: > > > > ERROR: linux-fslc-5.4.46+gitAUTOINC+38d6c3525e-r0 do_kernel_metadata: > Could not locate BSP definition for imx7s-warp/standard and no defconfig > was provided > > > > Then, after 11089e06bf, I see the error I originally posted from my CI > job, but reproduced here from a local build: > > > > ERROR: linux-fslc-5.4.46+gitAUTOINC+38d6c3525e-r0 do_kernel_configme: > Execution of > '/data/warp7/workspace-dunfell/build-rpb/tmp-rpb-glibc/work/imx7s_warp-linaro-linux-gnueabi/linux-fslc/5.4.46+gitAUTOINC+38d6c3525e-r0/temp/run.do_kernel_configme.31899' > failed with exit code 1: > > WARNING: exit code 1 from a shell command. > > > > ERROR: Logfile of failure stored in: > /data/warp7/workspace-dunfell/build-rpb/tmp-rpb-glibc/work/imx7s_warp-linaro-linux-gnueabi/linux-fslc/5.4.46+gitAUTOINC+38d6c3525e-r0/temp/log.do_kernel_configme.31899 > > Log data follows: > > | DEBUG: Executing python function extend_recipe_sysroot > > | NOTE: Direct dependencies are > ['/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/meta-arm/meta-arm-toolchain/recipes-devtools/gcc/gcc-cross_arm-9.2.bb:do_populate_sysroot', > 'virtual:native:/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/openembedded-core/meta/recipes-extended/bc/bc_1.07.1.bb:do_populate_sysroot', > '/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/openembedded-core/meta/recipes-devtools/binutils/binutils-cross_2.34.bb:do_populate_sysroot', > 'virtual:native:/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/openembedded-core/meta/recipes-devtools/bison/bison_3.5.3.bb:do_populate_sysroot', > '/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/openembedded-core/meta/recipes-devtools/quilt/quilt-native_0.66.bb:do_populate_sysroot', > '/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/openembedded-core/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb:do_populate_sysroot', > 'virtual:native:/data/warp7/workspace-dunfell/build-rpb/conf/../../layers/openembedded-core/meta/recipes-devtools/patch/patch_2.7.6.bb: > do_populate_sysroot'] > > | NOTE: Installed into sysroot: [] > > | NOTE: Skipping as already exists in sysroot: ['gcc-cross-arm', > 'bc-native', 'binutils-cross-arm', 'bison-native', 'quilt-native', > 'kern-tools-native', 'patch-native', 'readline-native', 'flex-native', > 'automake-native', 'texinfo-dummy-native', 'autoconf-native', > 'libtool-native', 'gnu-config-native', 'xz-native', > 'gettext-minimal-native', 'libmpc-native', 'gmp-native', 'zlib-native', > 'mpfr-native', 'linux-libc-headers', 'attr-native', 'ncurses-native', > 'm4-native', 'pkgconfig-native'] > > | DEBUG: Python function extend_recipe_sysroot finished > > | DEBUG: Executing shell function do_kernel_configme > > | WARNING: exit code 1 from a shell command. > > | ERROR: Execution of > '/data/warp7/workspace-dunfell/build-rpb/tmp-rpb-glibc/work/imx7s_warp-linaro-linux-gnueabi/linux-fslc/5.4.46+gitAUTOINC+38d6c3525e-r0/temp/run.do_kernel_configme.31899' > failed with exit code 1: > > | WARNING: exit code 1 from a shell command. > > > > I haven't yet looked at what these patches do, but I'm expecting there's > something to update in the linux-fslc recipe, unless there's another issue > in the defconfig patches. > > > > We've had multiple reports that with those patches the linux-fslc > recipe is building. So something else may be going on in your setup. > That's reassuring. > If you have a set of layers and build steps, can you send them to me ? > I can spin up a local build and see if I get the same behaviour. > Thanks for the offer. I'm based on Linaro's "OE-RPB" setup. My own layer is quite simple: https://git.linaro.org/people/ryan.harkin/meta-warp7.git/log/?h=dunfell I mostly provide a new image definition and a simple u-boot patch to change the console UART for our CI system. I don't have a kernel recipe overlaying linux-fslc. My basic steps to clone and build are: -------------------------- mkdir /data/warp7/workspace-dunfell cd /data/warp7/workspace-dunfell repo init -u \ https://git.linaro.org/people/ryan.harkin/oe-rpb-manifest.git \ -b dunfell repo sync # link in shared downloads and sstate-cache ln -s /linaro/oe-rpb/downloads . && ln -s /linaro/oe-rpb/sstate-cache . export MACHINE=imx7s-warp ; export DISTRO=rpb ; . setup-environment bitbake warp7-console-image -------------------------- Right now, I've pinned oo-core to my last known working build from before your recent defconfig patch, so you'll want to go into layer/openembedded-core and checkout the latest commits. For reference, my pinned commit: cabaf5654d 2020-07-06 iso-codes: switch upstream branch master -> main [Hongxu Jia] Local testing tells me that the repo works fine for me all the way up to just before your commit, at this point: 2399fdf98a 2020-07-03 classes/archive: do_configure should not depend on do_ar_p.. [Joshua Watt] I'm building on an Ubuntu 18.04 host locally. Regards, Ryan. > > Bruce > > > Regards, > > Ryan. > > > > > > > > > > > > > >> > >> > >> > >> Steve > >> > >> > > Here's a link to my failing build for reference: > >> > > > https://ci.linaro.org/job/warp7-openembedded-dunfell/67/DISTRO=rpb,MACHINE=imx7s-warp,label=docker-buster-amd64/consoleText > >> > > > >> > > And a snippet from the failure: > >> > > > >> > > ERROR: linux-fslc-5.4.46+gitAUTOINC+38d6c3525e-r0 > do_kernel_configme: Execution of > '/srv/oe/build/tmp-rpb-glibc/work/imx7s_warp-linaro-linux-gnueabi/linux-fslc/5.4.46+gitAUTOINC+38d6c3525e-r0/temp/run.do_kernel_configme.7123' > failed with exit code 1: > >> > > WARNING: exit code 1 from a shell command. > >> > > > >> > > ERROR: Logfile of failure stored in: > /srv/oe/build/tmp-rpb-glibc/work/imx7s_warp-linaro-linux-gnueabi/linux-fslc/5.4.46+gitAUTOINC+38d6c3525e-r0/temp/log.do_kernel_configme.7123 > >> > > Log data follows: > >> > > | DEBUG: Executing python function extend_recipe_sysroot > >> > > | NOTE: Direct dependencies are > ['virtual:native:/srv/oe/build/conf/../../layers/openembedded-core/meta/recipes-devtools/bison/bison_3.5.3.bb:do_populate_sysroot', > '/srv/oe/build/conf/../../layers/openembedded-core/meta/recipes-kernel/kern-tools/kern-tools-native_git.bb:do_populate_sysroot', > '/srv/oe/build/conf/../../layers/openembedded-core/meta/recipes-devtools/binutils/binutils-cross_2.34.bb:do_populate_sysroot', > '/srv/oe/build/conf/../../layers/openembedded-core/meta/recipes-devtools/quilt/quilt-native_0.66.bb:do_populate_sysroot', > 'virtual:native:/srv/oe/build/conf/../../layers/openembedded-core/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', > 'virtual:native:/srv/oe/build/conf/../../layers/openembedded-core/meta/recipes-extended/bc/bc_1.07.1.bb:do_populate_sysroot', > '/srv/oe/build/conf/../../layers/meta-arm/meta-arm-toolchain/recipes-devtools/gcc/gcc-cross_arm-9.2.bb: > do_populate_sysroot'] > >> > > | NOTE: Installed into sysroot: [] > >> > > | NOTE: Skipping as already exists in sysroot: ['bison-native', > 'kern-tools-native', 'binutils-cross-arm', 'quilt-native', 'patch-native', > 'bc-native', 'gcc-cross-arm', 'flex-native', 'texinfo-dummy-native', > 'gnu-config-native', 'readline-native', 'libtool-native', > 'automake-native', 'autoconf-native', 'xz-native', 'linux-libc-headers', > 'gmp-native', 'libmpc-native', 'mpfr-native', 'zlib-native', > 'gettext-minimal-native', 'attr-native', 'm4-native', 'ncurses-native', > 'pkgconfig-native'] > >> > > | DEBUG: Python function extend_recipe_sysroot finished > >> > > | DEBUG: Executing shell function do_kernel_configme > >> > > | WARNING: exit code 1 from a shell command. > >> > > | ERROR: Execution of > '/srv/oe/build/tmp-rpb-glibc/work/imx7s_warp-linaro-linux-gnueabi/linux-fslc/5.4.46+gitAUTOINC+38d6c3525e-r0/temp/run.do_kernel_configme.7123' > failed with exit code 1: > >> > > | WARNING: exit code 1 from a shell command. > >> > > | > >> > > NOTE: recipe linux-fslc-5.4.46+gitAUTOINC+38d6c3525e-r0: task > do_kernel_configme: Failed > >> > > ERROR: Task > (/srv/oe/build/conf/../../layers/meta-freescale/recipes-kernel/linux/linux-fslc_5.4.bb:do_kernel_configme) > failed with exit code '1' > >> > > > >> > > > >> > > > >> > > On Mon, 6 Jul 2020 at 17:38, Steve Sakoman <st...@sakoman.com> > wrote: > >> > >> > >> > >> On Mon, Jul 6, 2020 at 6:29 AM Bruce Ashfield < > bruce.ashfi...@gmail.com> wrote: > >> > >> > > >> > >> > We have a fixup patch for this one in test right now, so we > don't want > >> > >> > this patch, without the follow up. > >> > >> > > >> > >> > But this is useful for dunfell, since it was an unexpected > behaviour > >> > >> > that needed to be fixed. > >> > >> > >> > >> Thanks, I'll drop this patch from the pull request and include it > >> > >> along with the fixup patch in next week's patch set. > >> > >> > >> > >> Steve > >> > >> > >> > >> > On Mon, Jul 6, 2020 at 12:11 PM Steve Sakoman <st...@sakoman.com> > wrote: > >> > >> > > > >> > >> > > From: Bruce Ashfield <bruce.ashfi...@gmail.com> > >> > >> > > > >> > >> > > It is uncommon that a BSP definition and a defconfig are used > in > >> > >> > > a single configuration. That being said, it is a valid way to > >> > >> > > organize kernel configuration meta data. > >> > >> > > > >> > >> > > When a defconfig is used, either on the src_uri or from in > >> > >> > > the kernel tree, it is normally expected that it is the > baseline, > >> > >> > > with all options applied on top of it. > >> > >> > > > >> > >> > > With this commit, we detect either type of defconfig and ensure > >> > >> > > that it is used first, followed by the fragments in their > >> > >> > > previous order. This allows existing configuration stacks to > >> > >> > > remain the same, while ensuring that a defconfig combined stack > >> > >> > > works as expected. > >> > >> > > > >> > >> > > Signed-off-by: Bruce Ashfield <bruce.ashfi...@gmail.com> > >> > >> > > Signed-off-by: Richard Purdie < > richard.pur...@linuxfoundation.org> > >> > >> > > (cherry picked from commit > e6845327b69396d843a2f3c4c3ac9400ae9caedf) > >> > >> > > Signed-off-by: Steve Sakoman <st...@sakoman.com> > >> > >> > > --- > >> > >> > > meta/classes/kernel-yocto.bbclass | 33 > ++++++++++++++++++++----------- > >> > >> > > 1 file changed, 21 insertions(+), 12 deletions(-) > >> > >> > > > >> > >> > > diff --git a/meta/classes/kernel-yocto.bbclass > b/meta/classes/kernel-yocto.bbclass > >> > >> > > index 5bc627066e..41d8620e67 100644 > >> > >> > > --- a/meta/classes/kernel-yocto.bbclass > >> > >> > > +++ b/meta/classes/kernel-yocto.bbclass > >> > >> > > @@ -131,7 +131,7 @@ do_kernel_metadata() { > >> > >> > > else > >> > >> > > cp -f > ${S}/arch/${ARCH}/configs/${KBUILD_DEFCONFIG} ${WORKDIR}/defconfig > >> > >> > > fi > >> > >> > > - sccs="${WORKDIR}/defconfig" > >> > >> > > + > in_tree_defconfig="${WORKDIR}/defconfig" > >> > >> > > else > >> > >> > > bbfatal "A KBUILD_DEFCONFIG > '${KBUILD_DEFCONFIG}' was specified, but not present in the source tree" > >> > >> > > fi > >> > >> > > @@ -153,14 +153,24 @@ do_kernel_metadata() { > >> > >> > > patches="${@" ".join(find_patches(d,''))}" > >> > >> > > feat_dirs="${@" ".join(find_kernel_feature_dirs(d))}" > >> > >> > > > >> > >> > > - # a quick check to make sure we don't have duplicate > defconfigs > >> > >> > > - # If there's a defconfig in the SRC_URI, did we also > have one from > >> > >> > > - # the KBUILD_DEFCONFIG processing above ? > >> > >> > > - if [ -n "$sccs" ]; then > >> > >> > > - # we did have a defconfig from above. remove any > that might be in the src_uri > >> > >> > > - sccs_from_src_uri=$(echo $sccs_from_src_uri | awk > '{ if ($0!="defconfig") { print $0 } }' RS=' ') > >> > >> > > + # a quick check to make sure we don't have duplicate > defconfigs If > >> > >> > > + # there's a defconfig in the SRC_URI, did we also have > one from the > >> > >> > > + # KBUILD_DEFCONFIG processing above ? > >> > >> > > + src_uri_defconfig=$(echo $sccs_from_src_uri | awk '{ > if ($0=="defconfig") { print $0 } }' RS=' ') > >> > >> > > + # drop and defconfig's from the src_uri variable, we > captured it just above here if it existed > >> > >> > > + sccs_from_src_uri=$(echo $sccs_from_src_uri | awk '{ > if ($0!="defconfig") { print $0 } }' RS=' ') > >> > >> > > + if [ -n "$in_tree_defconfig" ]; then > >> > >> > > + sccs_defconfig=$in_tree_defconfig > >> > >> > > + if [ -n "$src_uri_defconfig" ]; then > >> > >> > > + bbwarn "[NOTE]: defconfig was supplied > both via KBUILD_DEFCONFIG and SRC_URI. Dropping SRC_URI defconfig" > >> > >> > > + fi > >> > >> > > + else > >> > >> > > + # if we didn't have an in-tree one, make our > defconfig the one > >> > >> > > + # from the src_uri. Note: there may not have > been one from the > >> > >> > > + # src_uri, so this can be an empty variable. > >> > >> > > + sccs_defconfig=$src_uri_defconfig > >> > >> > > fi > >> > >> > > - sccs="$sccs $sccs_from_src_uri" > >> > >> > > + sccs="$sccs_from_src_uri" > >> > >> > > > >> > >> > > # check for feature directories/repos/branches that > were part of the > >> > >> > > # SRC_URI. If they were supplied, we convert them into > include directives > >> > >> > > @@ -187,11 +197,10 @@ do_kernel_metadata() { > >> > >> > > # expand kernel features into their full path > equivalents > >> > >> > > bsp_definition=$(spp ${includes} --find > -DKMACHINE=${KMACHINE} -DKTYPE=${LINUX_KERNEL_TYPE}) > >> > >> > > if [ -z "$bsp_definition" ]; then > >> > >> > > - echo "$sccs" | grep -q defconfig > >> > >> > > - if [ $? -ne 0 ]; then > >> > >> > > + if [ -z "$sccs_defconfig" ]; then > >> > >> > > bbfatal_log "Could not locate BSP > definition for ${KMACHINE}/${LINUX_KERNEL_TYPE} and no defconfig was > provided" > >> > >> > > fi > >> > >> > > - > >> > >> > > + else > >> > >> > > # if the bsp definition has "define > KMETA_EXTERNAL_BSP t", > >> > >> > > # then we need to set a flag that will > instruct the next > >> > >> > > # steps to use the BSP as both configuration > and patches. > >> > >> > > @@ -206,7 +215,7 @@ do_kernel_metadata() { > >> > >> > > elements="`echo -n ${bsp_definition} ${sccs} > ${patches} ${KERNEL_FEATURES}`" > >> > >> > > if [ -n "${elements}" ]; then > >> > >> > > echo "${bsp_definition}" > > ${S}/${meta_dir}/bsp_definition > >> > >> > > - scc --force -o ${S}/${meta_dir}:cfg,merge,meta > ${includes} ${bsp_definition} ${sccs} ${patches} ${KERNEL_FEATURES} > >> > >> > > + scc --force -o ${S}/${meta_dir}:cfg,merge,meta > ${includes} $sccs_defconfig $bsp_definition $sccs $patches > ${KERNEL_FEATURES} > >> > >> > > if [ $? -ne 0 ]; then > >> > >> > > bbfatal_log "Could not generate > configuration queue for ${KMACHINE}." > >> > >> > > fi > >> > >> > > -- > >> > >> > > 2.17.1 > >> > >> > > > >> > >> > > > >> > >> > > >> > >> > > >> > >> > > >> > >> > -- > >> > >> > - Thou shalt not follow the NULL pointer, for chaos and madness > await > >> > >> > thee at its end > >> > >> > - "Use the force Harry" - Gandalf, Star Trek II > >> > >> > >> > > >> > > >> > > >> > -- > >> > - Thou shalt not follow the NULL pointer, for chaos and madness await > >> > thee at its end > >> > - "Use the force Harry" - Gandalf, Star Trek II > > > > -- > - Thou shalt not follow the NULL pointer, for chaos and madness await > thee at its end > - "Use the force Harry" - Gandalf, Star Trek II >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#140899): https://lists.openembedded.org/g/openembedded-core/message/140899 Mute This Topic: https://lists.openembedded.org/mt/75336267/21656 Group Owner: openembedded-core+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-