Hi Mike,

On 15.03.21 14:13, Mike Looijmans wrote:
For software updates, I want to have what would have gone into the boot partition of the WIC image as a separate file.

If I want to have the contents of the rootfs as an ext4 image, I can just specify IMAGE_TYPES="ext4" in my image recipe.
 > This image I can feed to SWUdate and write to the rootfs storage.

But I also want to be able to update the boot partition (for example, the raspberrypi has the annoying property that devicetree and kernel reside here).

This is very annoying, but you could also get rid of it. You can install kernel and device tree in your rootfs (then they are located in /boot as usual), and you switch to U-Boot ( RPI_USE_U_BOOT = "1"). The proprietary bootloader will start U-Boot instead of kernel, and in u-boot you can load kernel and device tree from your rootfs.


If I create a WIC image, the boot partition is in there with the proper files (from IMAGE_BOOT_FILES) so I would really like to re-use that code. I could create the wic image and then cut out the part I want, but that doesn't seem particularly nice.

You can add vfat support for IMAGE_FSTYPES, and then you can build an image (you can just take the files you have in IMAGE_BOOT_FILES).


What I want to do at update time is to write the new boot partition to another location on disk, and then adjust the partition table to make the first partition entry point to the new copy. That way, in case of unexpected failure (power loss for example), the device remains bootable.

This does not seem to be atomic. It remains the risk that partition table gets corrupted and then even the first bootloader cannot run. If you want to have a power-cut safe way to update is not enough.

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#149460): 
https://lists.openembedded.org/g/openembedded-core/message/149460
Mute This Topic: https://lists.openembedded.org/mt/81348440/21656
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub 
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to