Ancient thread, but might be of interest to others.
A while ago the power supply died. After replacing the PSU, the error
below hasn't occurred any more.
I'm not 100% certain, but it's very likely the issue was caused by that
PSU on the brink of failing completely. Not the first thing to come to
mind...
Apparently gatesgarth is more power demanding than hardknott :)
Kind regards,
Mike
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijm...@topicproducts.com
W: www.topic.nl
Please consider the environment before printing this e-mail
On 27-01-2021 16:10, Mike Looijmans via lists.openembedded.org wrote:
When doing large builds, the GCC compiler tends to crash on random
spots in the code. There are a few common denominators though.
It only happens when compiling for aarch64 (cortex-A53), not for
32-bit arm (cortex-A9)
It's random and usually happens on "big" sets like kernel, openssl,
boost, u-boot etc.
It always reports "during GIMPLE pass: ealias" in the error, for example:
| during GIMPLE pass: ealias
| ../openssl-1.1.1i/crypto/x509v3/v3_utl.c: In function 'do_x509_check':
| ../openssl-1.1.1i/crypto/x509v3/v3_utl.c:1239:1: internal compiler
error: Illegal instruction
| 1239 | }
Compiling the same thing again usually goes fine.
I've never experienced this with the zeus and older branches of OE.
I've already tried upgrading to the latest gatesgarth status, and
cleaning out everything and start from scratch. I've also run "mprime"
test on my machine (over one hour) just to be confident that the
system itself is really okay.
Ideas to diagnose, fix or reliably reprodruce are more than welcome.
--
Mike Looijmans
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#153408):
https://lists.openembedded.org/g/openembedded-core/message/153408
Mute This Topic: https://lists.openembedded.org/mt/83863468/21656
Group Owner: openembedded-core+ow...@lists.openembedded.org
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
