Hi Lee Chee, > Hi, > > I think need to fix this too >
Thanks for pointing out those issues. > AssertionError: > The following recipes do not have a maintainer assigned to them. > Please add an entry to meta/conf/distro/include/maintainers.inc file. > glibc-tests > (/home/pokybuild/yocto-worker/oe-selftest-centos/build/meta/recipes-core/glibc/glibc-tests_2.34.bb) > > full log: > https://autobuilder.yoctoproject.org/typhoon/#/builders/79/builds/2807/steps/15/logs/stdio > > > also for issue with > "Missing or unbuildable dependency chain was: > ['nativesdk-ptest-runner']" you may refer to these build for build > config > https://autobuilder.yoctoproject.org/typhoon/#/builders/23/builds/4598/steps/11/logs/stdio > https://autobuilder.yoctoproject.org/typhoon/#/builders/97/builds/3629/steps/12/logs/stdio > > I will fix them and prepare v4. > > >-----Original Message----- > >From: openembedded-core@lists.openembedded.org <openembedded- > >c...@lists.openembedded.org> On Behalf Of ?ukasz Majewski > >Sent: Tuesday, 9 November, 2021 12:31 AM > >To: Alexandre Belloni <alexandre.bell...@bootlin.com> > >Cc: Richard Purdie <richard.pur...@linuxfoundation.org>; Nathan Rossi > ><nat...@nathanrossi.com>; Khem Raj <raj.k...@gmail.com>; Adhemerval > >Zanella <adhemerval.zane...@linaro.org>; Patches and discussions > >about the oe- core layer <openembedded-core@lists.openembedded.org> > >Subject: Re: [OE-core] [PATCH v3] glibc: ptest: Add running glibc > >time related test suite (Y2038) with ptest > > > >Hi Alexandre. > > > >Sorry for the late reply - I've must overlooked this reply... > > > >> Hello, > >> > >> There is a remaining issue: > >> > >> WARNING: Nothing RPROVIDES 'nativesdk-ptest-runner' (but > >> virtual:nativesdk:/home/pokybuild/yocto-worker/build-appliance/build/m > >> eta/recipes-core/glibc/glibc-tests_2.34.bb > >> RDEPENDS on or otherwise requires it) NOTE: Runtime target > >> 'nativesdk-ptest-runner' is unbuildable, removing... Missing or > >> unbuildable dependency chain was: ['nativesdk-ptest-runner'] > > > >Could you share your setup? > > > >I've been trying to reproduce this problem with: > >MACHINE=qemuarm64 bitbake core-image-ptest-all -c populate_sdk > > > >but no warnings were observed. > > > >Thanks in advance. > > > >> > >> On 28/10/2021 14:00:20+0200, ?ukasz Majewski wrote: > >> > This patch introduces new recipe - namely 'glibc-tests', which > >> > builds and installs time related (to check if Y2038 support > >> > works) glibc test suite to OE/Yocto built image. > >> > > >> > It reuses code from already available 'glibc-testsuite' recipe, > >> > which is run with 'bitbake glibc-testsuite -c check' and uses > >> > qemu to execute remotely (via SSH) tests on some emulated > >> > machine. > >> > > >> > This recipe installs time related glibc tests on some rootfs > >> > image. Afterwards, those tests can be executed on the real > >> > hardware, to facilitate validation of it with Y2038 problem > >> > compliance. > >> > > >> > To test time related subset - one needs to call: > >> > ptest-runner glibc-tests > >> > then change the date after Y2038 threshold for 32 bit systems: > >> > date -s "20 JAN 2038 18:00:00" > >> > and then run ptest-runner again. > >> > > >> > To facilitate debugging, source files are provided by default > >> > with the unstripped debugging symbols. Such approach would > >> > reduce the already complex recipe (as it inherits base glibc > >> > one), so there is no need to also install *-dbg and *-src > >> > packages. > >> > > >> > Signed-off-by: Lukasz Majewski <lu...@denx.de> > >> > > >> > --- > >> > Changes for v3: > >> > - Provide missing ${PN}-ptest for PACKAGES, PROVIDES and > >> > RPROVIDES variables > >> > > >> > Changes for v2: > >> > - Just focus on time related set of tests as those can be run as > >> > standalone > >> > - Reuse of already built tests (from glibc-tests.inc) and depoloy > >> > them on the HW target. > >> > - Provide single 'run-ptest' script. > >> > - Update the recipe to run with newest poky's -master > >> > --- > >> > .../distro/include/ptest-packagelists.inc | 1 + > >> > meta/recipes-core/glibc/glibc-tests_2.34.bb | 112 > >> > ++++++++++++++++++ meta/recipes-core/glibc/glibc/run-ptest > >> > | 37 ++++++ 3 files changed, 150 insertions(+) create mode > >> > 100644 meta/recipes-core/glibc/glibc-tests_2.34.bb > >> > create mode 100755 meta/recipes-core/glibc/glibc/run-ptest > >> > > >> > diff --git a/meta/conf/distro/include/ptest-packagelists.inc > >> > b/meta/conf/distro/include/ptest-packagelists.inc index > >> > 2e324f8da4..fd52fa72a4 100644 --- > >> > a/meta/conf/distro/include/ptest-packagelists.inc +++ > >> > b/meta/conf/distro/include/ptest-packagelists.inc @@ -61,6 +61,7 > >> > @@ PTESTS_FAST = "\ slang-ptest \ > >> > wayland-ptest \ > >> > zlib-ptest \ > >> > + glibc-tests-ptest \ > >> > " > >> > PTESTS_FAST:remove:mips64 = "qemu-ptest" > >> > PTESTS_PROBLEMS:append:mips64 = "qemu-ptest" > >> > diff --git a/meta/recipes-core/glibc/glibc-tests_2.34.bb > >> > b/meta/recipes-core/glibc/glibc-tests_2.34.bb new file mode > >> > 100644 index 0000000000..0a6920eef4 > >> > --- /dev/null > >> > +++ b/meta/recipes-core/glibc/glibc-tests_2.34.bb > >> > @@ -0,0 +1,112 @@ > >> > +require glibc_${PV}.bb > >> > +require glibc-tests.inc > >> > + > >> > +inherit ptest > >> > + > >> > +SRC_URI:append = " \ > >> > + file://run-ptest \ > >> > +" > >> > + > >> > +SUMMARY = "glibc tests to be run with ptest" > >> > + > >> > +# Erase some variables already set by glibc_${PV} python > >> > +__anonymous() { > >> > + # Remove packages provided by glibc build, we only need a > >> > subset of them > >> > + d.setVar("PACKAGES", "${PN} ${PN}-ptest") > >> > + > >> > + d.setVar("PROVIDES", "${PN} ${PN}-ptest") > >> > + d.setVar("RPROVIDES", "${PN} ${PN}-ptest") > >> > + > >> > + d.setVar("RRECOMMENDS", "") > >> > +} > >> > + > >> > +# Remove any lefovers from original glibc recipe > >> > RPROVIDES:${PN} = +"${PN}" > >> > +RRECOMMENDS:${PN} = "" > >> > +RDEPENDS:${PN} = " glibc sed" > >> > +DEPENDS:append = " sed" > >> > + > >> > +# Just build tests for target - do not run them do_check:append > >> > () +{ > >> > + oe_runmake -i check run-built-tests=no } addtask > >> > do_check after +do_compile before do_install_ptest_base > >> > + > >> > +glibc_strip_build_directory () { > >> > + # Delete all non executable files from build directory > >> > + find ${B} ! -executable -type f -delete > >> > + > >> > + # Remove build dynamic libraries and links to them as > >> > + # those are already installed in the target device > >> > + find ${B} -type f -name "*.so" -delete > >> > + find ${B} -type l -name "*.so*" -delete > >> > + > >> > + # Remove headers (installed with glibc) > >> > + find ${B} -type f -name "*.h" -delete > >> > + > >> > + find ${B} -type f -name "isomac" -delete > >> > + find ${B} -type f -name "annexc" -delete } > >> > + > >> > +do_install_ptest_base () { > >> > + glibc_strip_build_directory > >> > + > >> > + ls -r ${B}/*/*-time64 > ${B}/tst_time64 > >> > + > >> > + # Remove '-time64' suffix - those tests are also time > >> > related > >> > + sed -e "s/-time64$//" ${B}/tst_time64 > > >> > ${B}/tst_time_tmp > >> > + tst_time=$(cat ${B}/tst_time_tmp ${B}/tst_time64) > >> > + > >> > + rm ${B}/tst_time_tmp ${B}/tst_time64 > >> > + echo "${tst_time}" > >> > + > >> > + # Install build test programs to the image > >> > + install -d ${D}${PTEST_PATH}/tests/glibc-ptest/ > >> > + > >> > + for f in "${tst_time}" > >> > + do > >> > + cp -r ${f} ${D}${PTEST_PATH}/tests/glibc-ptest/ > >> > + done > >> > + > >> > + install -d ${D}${PTEST_PATH} > >> > + cp ${WORKDIR}/run-ptest ${D}${PTEST_PATH}/ > >> > + > >> > +} > >> > + > >> > +# The datadir directory is required to allow core (and reused) # > >> > +glibc cleanup function to finish correctly, as this directory # > >> > is +not created for ptests stash_locale_package_cleanup:prepend > >> > () { > >> > + mkdir -p ${PKGD}${datadir} > >> > +} > >> > + > >> > +stash_locale_sysroot_cleanup:prepend () { > >> > + mkdir -p ${SYSROOT_DESTDIR}${datadir} } > >> > + > >> > +# Prevent the do_package() task to set 'libc6' prefix # for > >> > glibc +tests related packages python populate_packages:prepend > >> > () { > >> > + if d.getVar('DEBIAN_NAMES'): > >> > + d.setVar('DEBIAN_NAMES', '') } > >> > + > >> > +FILES:${PN} = "${PTEST_PATH}/* /usr/src/debug/glibc-tests/*" > >> > + > >> > +EXCLUDE_FROM_SHLIBS = "1" > >> > + > >> > +# Install debug data in .debug and sources in /usr/src/debug # > >> > It +is more handy to have _all_ the sources and symbols in one # > >> > place +(package) as this recipe will be used for validation and # > >> > +debugging. > >> > +PACKAGE_DEBUG_SPLIT_STYLE = "debug" > >> > + > >> > +# glibc test cases violate by default some Yocto/OE checks > >> > (staticdev, +# textrel) > >> > +# 'debug-files' - add everything (including debug) into one > >> > package +# (no need to install/build *-src > >> > package) +INSANE_SKIP:${PN} += "staticdev textrel debug-files > >> > rpaths" + > >> > +deltask do_stash_locale > >> > +do_install[noexec] = "1" > >> > +do_populate_sysroot[noexec] = "1" > >> > diff --git a/meta/recipes-core/glibc/glibc/run-ptest > >> > b/meta/recipes-core/glibc/glibc/run-ptest new file mode 100755 > >> > index 0000000000..f637986105 > >> > --- /dev/null > >> > +++ b/meta/recipes-core/glibc/glibc/run-ptest > >> > @@ -0,0 +1,37 @@ > >> > +#!/bin/sh > >> > +# ptest script for glibc - to run time related tests to # > >> > +facilitate Y2038 validation # Run with 'ptest-runner > >> > glibc-tests' + > >> > +output() { > >> > + retcode=$? > >> > + if [ $retcode -eq 0 ] > >> > + then echo "PASS: $i" > >> > + elif [ $retcode -eq 77 ] > >> > + then echo "SKIP: $i" > >> > + else echo "FAIL: $i" > >> > + fi > >> > +} > >> > + > >> > +# Allow altering time on the target export > >> > +GLIBC_TEST_ALLOW_TIME_SETTING="1" > >> > + > >> > +tst_time64=$(ls -r ${PWD}/tests/glibc-ptest/*-time64) > >> > + > >> > +# Remove '-time64' suffix - those tests are also time # related > >> > +tst_time_tmp=$(sed -e "s/-time64$//" <<< ${tst_time64}) > >> > + > >> > +# Run tests supporting only 32 bit time for i in > >> > ${tst_time_tmp} do > >> > + $i >/dev/null 2>&1 > >> > + output > >> > +done > >> > + > >> > +# Run tests supporting only 64 bit time for i in ${tst_time64} > >> > do > >> > + $i >/dev/null 2>&1 > >> > + output > >> > +done > >> > -- > >> > 2.20.1 > >> > > >> > >> > > >> > > >> > >> > > > > > > > > > >Best regards, > > > >Lukasz Majewski > > > >-- > > > >DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > >HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > >Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > >lu...@denx.de Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgp4z4o1ZfqLF.pgp
Description: OpenPGP digital signature
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#158019): https://lists.openembedded.org/g/openembedded-core/message/158019 Mute This Topic: https://lists.openembedded.org/mt/86650301/21656 Group Owner: openembedded-core+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
