I find that polkit is failing after a pull this morning: ERROR: Function failed: BUILDSPEC (see /media/Work/yocto/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/polkit-0.104-r0/temp/log.do_package_write_rpm.25212 for further information) ERROR: Logfile of failure stored in: /media/Work/yocto/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/polkit-0.104-r0/temp/log.do_package_write_rpm.25212 Log data follows: | NOTE: Creating RPM package for polkit-dbg | NOTE: Creating RPM package for polkit | NOTE: Creating RPM package for polkit | NOTE: Creating RPM package for polkit-doc | NOTE: Creating RPM package for polkit-dev | NOTE: Creating RPM package for polkit-staticdev | NOTE: Creating RPM package for polkit-locale-da | DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common'] | ERROR: Function failed: BUILDSPEC (see /media/Work/yocto/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/polkit-0.104-r0/temp/log.do_package_write_rpm.25212 for further information) | error: line 24: Illegal char '-' in EVR: Requires: systemd >= v38-53-ga3f914b | error: Package has no %description: polkit-0.104-r0.armv7a | Building target platforms: armv7a-vfp-neon-poky-linux-gnueabi NOTE: package polkit-0.104-r0: task do_package_write_rpm: Failed ERROR: Task 1059 (/home/sakoman/source/yocto/poky/meta/recipes-extended/polkit/polkit_0.104.bb, do_package_write_rpm) failed with exit code '1'
My image does include systemd from meta-openembedded so I suspect that may be a factor. For those who are building with sysvinti, do you see this issue? Steve _______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
