You can copy the sstate cache out of build-st somewhere where it will be reused (set up local.conf accordingly).
Alex On Fri, 25 Mar 2022 at 12:28, Ferry Toth <[email protected]> wrote: > > Hi, > > Op 24-03-2022 om 23:11 schreef Ferry Toth: > .... > > It doesn't seem to be a particularly volatile area in the code. I refreshed > > Xavier's patches for Gatesgarth, and am actively using unchanged patch on > Honisiter. > I don't know how the automated testing is working but I guess for RPM a repo > is generated using a small layer? And then tested on a qemu running the > rootfs? > Should be almost same for deb/apt, maybe could be modified from rpm test? > > I think the rpm test is test_testimage_dnf in > meta/lib/oeqa/selftest/cases/runtime_test.py. You'd run it with: > > oe-selftest -r runtime_test.TestImage.test_testimage_dnf > > I'll have a look. > > Grumble. I ran this test but it failed due to needing to run sudo to setup a > tap interface (I ran it under screen). > > Is there a way to continue this test without first clearing the build-st > directory? It take about 2 hours to get to this failure point. > > Thanks, > > Ferry > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#163637): https://lists.openembedded.org/g/openembedded-core/message/163637 Mute This Topic: https://lists.openembedded.org/mt/89962631/21656 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
