On Thu, 2012-03-15 at 12:14 -0700, Steve Sakoman wrote: > On Thu, Mar 15, 2012 at 9:21 AM, Mark Hatle <[email protected]> wrote: > > On 3/15/12 8:39 AM, Richard Purdie wrote: > >> > >> On Wed, 2012-03-14 at 15:28 -0700, Steve Sakoman wrote: > >>> > >>> NOTE: package boost-1.49.0-r2.0: task do_compile: Failed > >>> > >>> I don't have a fix for this but wanted to document the failure. > >>> > >>> As with all the other failures of this type, a -c cleansstate and > >>> rebuild is the workaround. > >>> > >>> It feels to me like there are quite a few recipes that don't handle > >>> rebuilds -- I seem to run into a few after every pull. > > > > > > I've observed the same thing. There seem to be a lot of packages that once > > they've been configured, compiled and installed, won't rebuild without being > > cleaned in someway. > > This is the one that really pisses me off, happens after every pull on > my Ubuntu 64 bit build machine: > > Summary: 1 task failed: > > virtual:native:/home/steve/source/yocto/poky/meta/recipes-devtools/pseudo/pseudo_1.2.bb, > do_compile > Summary: There were 8 WARNING messages shown. > Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > No simple fix since any bitbake command complains about needing to > rebuild psuedo: > > Pseudo is not present but is required, building this first before the main > build > > And of course the psuedo rebuild instantly fails!
Sounds like we need to teach the wrapper script to allow a pseudo-native to be passed -c options directly (and fix pseudo's makefile if needed). Cheers, Richard _______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
