On 9/25/2023 2:42 PM, Richard Purdie wrote:
On Mon, 2023-09-25 at 11:17 -0700, Khem Raj wrote:
core-image-minimal does not have ssh server in image so maybe start
with core-image-base or something or add
IMAGE_FEATURES += "ssh-server-openssh package-management hwcodecs" to local.conf
Whilst in general that is good advice to make minimal more testable,
you don't need an ssh server for ping to work so it won't be that for
the ping issue.
you might need to prepare the target testing setup
especially TEST_TARGET_IP and TEST_SERVER_IP and TEST_TARGET
see -
https://github.com/YoeDistro/yoe-distro/blob/master/conf/projects/visionfive2/config.conf#L18-L20
Can you share the full testimage log somewhere? The first thing to
check is whether anything booted or not. If it hasn't booted, it won't
ping. Start with that and work forward - are the network devices
configured in the kernel log?
[Sandeep]: We haven't touched any thing. We are using below commands
from stock poky. I would expect this is configured properly from poky layer.
MACHINE=beaglebone-yocto bitbake core-image-minimal
MACHINE=beaglebone-yocto bitbake core-image-minimal -c testimage
That does raise the question - how are you provisioning the beaglebone
and the other hardware with the image/kernel? I'm not sure that is
setup to work under qemu?
[Sandeep]: Attached the logs. I can boot qemu manually without any issues.
Cheers,
Richard
/scratch1/sandeepg/yocto/yp-master/build-ci-master $ MACHINE=beaglebone-yocto
runqemu nographic
runqemu - INFO - Running MACHINE=beaglebone-yocto bitbake -e ...
runqemu - INFO - Continuing with the following parameters:
KERNEL:
[/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/zImage]
MACHINE: [beaglebone-yocto]
FSTYPE: [wic (no-kernel-in-fs)]
ROOTFS:
[/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs-20230925163513.wic]
CONFFILE:
[/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs-20230925163513.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip
to make runqemu skip tap0.
runqemu - INFO - Network configuration:
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Running
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-arm
-device virtio-net-device,netdev=net0,mac=52:54:00:12:34:02 -netdev
tap,id=net0,ifname=tap0,script=no,downscript=no -object
rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive
id=disk0,file=/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs-20230925163513.wic,if=none,format=raw
-device virtio-blk-device,drive=disk0 -device virtio-rng-device -machine virt
-cpu cortex-a15 -m 256 -serial mon:stdio -serial null -nographic -kernel
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/zImage
-append 'root=/dev/vda2 rw mem=256M
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
console=ttyS0 console=ttyO0 console=ttyAMA0 console=ttyAMA0
systemd.mask=systemd-networkd '
runqemu - INFO - Host uptime: 3974482.56
Booting Linux on physical CPU 0x0
Linux version 6.1.20-yocto-standard (oe-user@oe-host)
(arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils)
2.41.0.20230731) #1 PREEMPT Sat Mar 18 02:48:04 UTC 2023
CPU: ARMv7 Processor [414fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
OF: fdt: Machine model: linux,dummy-virt
random: crng init done
Memory policy: Data cache writeback
cma: Reserved 16 MiB at 0x4f000000
Zone ranges:
Normal [mem 0x0000000040000000-0x000000004fffffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000040000000-0x000000004fffffff]
Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff]
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.0
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists, mobility grouping on. Total pages: 64960
Kernel command line: root=/dev/vda2 rw mem=256M
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
console=ttyS0 console=ttyO0 console=ttyAMA0 console=ttyAMA0
systemd.mask=systemd-networkd
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 220504K/262144K available (11264K kernel code, 1625K rwdata, 3848K
rodata, 1024K init, 521K bss, 25256K reserved, 16384K cma-reserved, 0K highmem)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
ftrace: allocating 43655 entries in 129 pages
ftrace: allocated 128 pages with 1 groups
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer(s) running at 62.50MHz (virt).
clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles:
0x1cd42e208c, max_idle_ns: 881590405314 ns
sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
Switching to timer-based delay loop, resolution 16ns
kfence: initialized - using 2097152 bytes for 255 objects at
0x(ptrval)-0x(ptrval)
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency..
125.00 BogoMIPS (lpj=625000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
CPU: Testing write buffer coherency: ok
CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit,
system vulnerable
CPU0: Spectre BHB: enabling loop workaround for all CPUs
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 0 and lim to 1.
cblist_init_generic: Setting shift to 0 and lim to 1.
cblist_init_generic: Setting shift to 0 and lim to 1.
Setting up static identity map for 0x40100000 - 0x40100060
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB pool for atomic coherent allocations
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 20, base_baud = 0) is a PL011
rev1
printk: console [ttyAMA0] enabled
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if
possible.
raid6: int32x8 gen() 249 MB/s
raid6: int32x4 gen() 283 MB/s
raid6: int32x2 gen() 761 MB/s
raid6: int32x1 gen() 921 MB/s
raid6: using algorithm int32x1 gen() 921 MB/s
raid6: .... xor() 405 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
PTP clock support registered
clocksource: Switched to clocksource arch_sys_counter
NET: Registered PF_INET protocol family
IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Initialise system trusted keyrings
workingset: timestamp_bits=14 max_order=16 bucket_order=2
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Key type cifs.idmap registered
xor: measuring software checksum speed
arm4regs : 1826 MB/sec
8regs : 2146 MB/sec
32regs : 1963 MB/sec
xor: using function: 8regs (2146 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
brd: module loaded
virtio_blk virtio1: 1/0/0 default/read/poll queues
virtio_blk virtio1: [vda] 140434 512-byte logical blocks (71.9 MB/68.6 MiB)
vda: vda1 vda2
mtdoops: mtd device (mtddev=name/number) must be supplied
usbcore: registered new interface driver usb-storage
SPI driver ads7846 has no spi_device_id for ti,tsc2046
SPI driver ads7846 has no spi_device_id for ti,ads7843
SPI driver ads7846 has no spi_device_id for ti,ads7845
SPI driver ads7846 has no spi_device_id for ti,ads7873
rtc-pl031 9010000.pl031: registered as rtc0
rtc-pl031 9010000.pl031: setting system clock to 2023-09-26T15:48:30 UTC
(1695743310)
i2c_dev: i2c /dev entries driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
u32 classifier
input device check on
Actions configured
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered PF_PACKET protocol family
Bridge firewalling registered
Key type dns_resolver registered
NET: Registered PF_VSOCK protocol family
ThumbEE CPU extension supported.
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
Key type encrypted registered
printk: console [netcon0] enabled
netconsole: network logging started
IP-Config: Complete:
device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2,
mask=255.255.255.0, gw=192.168.7.1
host=192.168.7.2, domain=, nis-domain=(none)
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
nameserver0=8.8.8.8
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error
-2
cfg80211: failed to load regulatory.db
uart-pl011 9000000.pl011: no DMA platform data
EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota mode: disabled.
VFS: Mounted root (ext4 filesystem) on device 254:2.
devtmpfs: mounted
Freeing unused kernel image (initmem) memory: 1024K
Run /sbin/init as init process
INIT: version 3.04 booting
Starting udev
udevd[113]: starting version 3.2.12
udevd[114]: starting eudev-3.2.12
EXT4-fs (vda2): re-mounted. Quota mode: disabled.
Configuring packages on first boot....
platform gpio-keys: deferred probe pending
Poky (Yocto Project Reference Distro)
4.2+snapshot-8815eefb0d6218661794a58008e1144a77d3394f beaglebone-yocto
/dev/ttyAMA0
beaglebone-yocto login: root
root@beaglebone-yocto:~# ifconfig
eth0 Link encap:Ethernet HWaddr 52:54:00:12:34:02
inet6 addr: fe80::5054:ff:fe12:3402/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1682 (1.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@beaglebone-yocto:~# QEMU: Terminated
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 3974510.61
DEBUG: Executing python function extend_recipe_sysroot
NOTE: Direct dependencies are
['virtual:native:/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/recipes-devtools/createrepo-c/createrepo-c_0.21.1.bb:do_populate_sysroot',
'virtual:native:/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/recipes-devtools/dnf/dnf_4.17.0.bb:do_populate_sysroot',
'virtual:native:/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/recipes-extended/cpio/cpio_2.14.bb:do_populate_sysroot']
NOTE: Installed into sysroot: ['cpio-native']
NOTE: Skipping as already exists in sysroot: ['createrepo-c-native',
'dnf-native', 'gettext-minimal-native', 'libtool-native',
'texinfo-dummy-native', 'curl-native', 'expat-native', 'sqlite3-native',
'file-native', 'python3-native', 'glib-2.0-native', 'xz-native',
'openssl-native', 'rpm-native', 'libxml2-native', 'zlib-native',
'cmake-native', 'librepo-native', 'python3-iniparse-native', 'libcomps-native',
'libdnf-native', 'bzip2-native', 'ncurses-native', 'util-linux-libuuid-native',
'gdbm-native', 'libnsl2-native', 'libedit-native', 'libtirpc-native',
'libffi-native', 'libpcre2-native', 'util-linux-native', 'gettext-native',
'perl-native', 'zstd-native', 'elfutils-native', 'popt-native',
'libgcrypt-native', 'lua-native', 'attr-native', 'gpgme-native',
'python3-wheel-native', 'python3-six-native', 'python3-installer-native',
'python3-setuptools-native', 'python3-build-native', 'libsolv-native',
'libmodulemd-native', 'swig-native', 'gobject-introspection-native',
'json-c-native', 'libcheck-native', 'libcap-ng-native', 'make-native',
'libarchive-native', 'libmicrohttpd-native', 'libcap-native',
'libgpg-error-native', 'readline-native', 'libassuan-native',
'python3-flit-core-native', 'python3-packaging-native',
'python3-pyproject-hooks-native', 'libyaml-native', 'flex-native',
'acl-native', 'gnutls-native', 'unzip-native', 'm4-native', 'libidn2-native',
'gmp-native', 'libtasn1-native', 'nettle-native', 'libunistring-native',
'gnu-config-native']
DEBUG: Python function extend_recipe_sysroot finished
DEBUG: Executing python function do_testimage
NOTE: Executing
'/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/recipe-sysroot-native/usr/bin/createrepo_c
--update -q
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/oe-testimage-repo/noarch'
...
NOTE: Executing
'/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/recipe-sysroot-native/usr/bin/createrepo_c
--update -q
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/oe-testimage-repo/cortexa8hf_neon'
...
NOTE: Executing
'/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/recipe-sysroot-native/usr/bin/createrepo_c
--update -q
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/oe-testimage-repo/beaglebone_yocto'
...
/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/runtime/cases/apt.py:44:
DeprecationWarning: invalid escape sequence '\['
self.target.run("cd %s; cp sources.list sources.list.bak; sed -i
's|\[trusted=yes\] http://bogus_ip:bogus_port|%s|g' sources.list" %
(apt_get_sourceslist_dir, apt_get_source_server))
DEBUG: test suites:
test_apt_install_from_repo (apt.AptRepoTest)
test_ping (ping.PingTest)
test_ssh (ssh.SSHTest)
test_cpio (buildcpio.BuildCpioTest)
test_galculator (buildgalculator.GalculatorTest)
test_lzip (buildlzip.BuildLzipTest)
test_connmand_help (connman.ConnmanTest)
test_connmand_running (connman.ConnmanTest)
test_date (date.DateTest)
test_df (df.DfTest)
test_dnf_help (dnf.DnfBasicTest)
test_dnf_history (dnf.DnfBasicTest)
test_dnf_info (dnf.DnfBasicTest)
test_dnf_search (dnf.DnfBasicTest)
test_dnf_version (dnf.DnfBasicTest)
test_dnf_makecache (dnf.DnfRepoTest)
test_dnf_exclude (dnf.DnfRepoTest)
test_dnf_install (dnf.DnfRepoTest)
test_dnf_install_dependency (dnf.DnfRepoTest)
test_dnf_install_from_disk (dnf.DnfRepoTest)
test_dnf_install_from_http (dnf.DnfRepoTest)
test_dnf_installroot (dnf.DnfRepoTest)
test_dnf_installroot_usrmerge (dnf.DnfRepoTest)
test_dnf_reinstall (dnf.DnfRepoTest)
test_dnf_repoinfo (dnf.DnfRepoTest)
test_gcc_compile (gcc.GccCompileTest)
test_gpp2_compile (gcc.GccCompileTest)
test_gpp_compile (gcc.GccCompileTest)
test_make (gcc.GccCompileTest)
test_python (gi.GObjectIntrospectionTest)
test_gohelloworld (go.GoHelloworldTest)
test_kernel_module (kernelmodule.KernelModuleTest)
test_ldd (ldd.LddTest)
test_logrotate_wtmp (logrotate.LogrotateTest)
test_logrotate_newlog (logrotate.LogrotateTest)
test_syslog_running (oe_syslog.SyslogTest)
test_syslog_logger (oe_syslog.SyslogTestConfig)
test_syslog_restart (oe_syslog.SyslogTestConfig)
test_syslog_startup_config (oe_syslog.SyslogTestConfig)
test_opkg_install_from_repo (opkg.OpkgRepoTest)
test_pam (pam.PamBasicTest)
test_parselogs (parselogs.ParseLogsTest)
test_perl_works (perl.PerlTest)
test_ptestrunner_expectfail (ptest.PtestRunnerTest)
test_ptestrunner_expectsuccess (ptest.PtestRunnerTest)
test_python3 (python.PythonTest)
test_rpm_help (rpm.RpmBasicTest)
test_rpm_query (rpm.RpmBasicTest)
test_rpm_query_nonroot (rpm.RpmBasicTest)
test_rpm_install (rpm.RpmInstallRemoveTest)
test_rpm_remove (rpm.RpmInstallRemoveTest)
test_check_rpm_install_removal_log_file_size (rpm.RpmInstallRemoveTest)
test_rust_c_lib_example (rust.RustCLibExampleTest)
test_cargo_compile (rust.RustCompileTest)
test_rust_compile (rust.RustCompileTest)
test_scp_file (scp.ScpTest)
test_stap (stap.StapTest)
test_systemd_basic (systemd.SystemdBasicTests)
test_systemd_failed (systemd.SystemdBasicTests)
test_systemd_list (systemd.SystemdBasicTests)
test_systemd_boot_time (systemd.SystemdJournalTests)
test_systemd_journal (systemd.SystemdJournalTests)
test_systemd_status (systemd.SystemdServiceTests)
test_systemd_disable_enable (systemd.SystemdServiceTests)
test_systemd_disable_enable_ro (systemd.SystemdServiceTests)
test_systemd_stop_start (systemd.SystemdServiceTests)
test_wayland_info (weston.WestonTest)
test_weston_can_initialize_new_wayland_compositor (weston.WestonTest)
test_weston_running (weston.WestonTest)
test_weston_supports_xwayland (weston.WestonTest)
test_xorg_running (xorg.XorgTest)
DEBUG: Not using kvm for runqemu
QMP Available for connection at
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/.pb069a_h
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:34551
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:37613
DEBUG: launchcmd=runqemu snapshot nographic beaglebone-yocto
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs.wic
tcpserial=34551:37613 bootparams=" printk.time=1" qemuparams="-pidfile
/scratch1/sandeepg/yocto/yp-master/build-ci-master/pidfile_1057886 -S -qmp
unix:./.3x96s5zw,server,wait -qmp unix:./.pb069a_h,server,nowait"
DEBUG: runqemu started, pid is 1057960
DEBUG: waiting at most 300 seconds for qemu pid (09/25/23 11:06:10)
DEBUG: QMP Initializing to
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/.3x96s5zw
DEBUG: QMP Connecting to
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/.3x96s5zw
QMP connected to QEMU at 09/25/23 11:06:10 and took 0.53 seconds
QMP released QEMU at 09/25/23 11:06:10 and took 0.04 seconds from connect
DEBUG: qemu started in 0.56 seconds - qemu procces pid is 1057963 (09/25/23
11:06:10)
DEBUG: qemu cmdline used:
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-arm
-device virtio-net-device,netdev=net0,mac=52:54:00:12:34:02 -netdev
tap,id=net0,ifname=tap0,script=no,downscript=no -object
rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive
id=disk0,file=/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs.wic,if=none,format=raw
-device virtio-blk-device,drive=disk0 -device virtio-rng-device -machine virt
-cpu cortex-a15 -m 256 -device virtio-serial-device -chardev
socket,id=virtcon,port=34551,host=127.0.0.1 -device virtconsole,chardev=virtcon
-serial tcp:127.0.0.1:37613 -pidfile
/scratch1/sandeepg/yocto/yp-master/build-ci-master/pidfile_1057886 -S -qmp
unix:./.3x96s5zw,server,wait -qmp unix:./.pb069a_h,server,nowait -snapshot
-serial mon:stdio -nographic -kernel
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/zImage
-append root=/dev/vda2 rw mem=256M
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
console=ttyS0 console=ttyO0 console=ttyAMA0 console=ttyAMA0
systemd.mask=systemd-networkd printk.time=1
DEBUG: Target IP: 192.168.7.2
DEBUG: Server IP: 192.168.7.1
DEBUG: Starting logging thread
DEBUG: Starting thread event loop
DEBUG: Connection request received
DEBUG: Setting connection established event
DEBUG: Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
KERNEL:
[/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/zImage]
MACHINE: [beaglebone-yocto]
FSTYPE: [wic (no-kernel-in-fs)]
ROOTFS:
[/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs.wic]
CONFFILE:
[/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip
to make runqemu skip tap0.
runqemu - INFO - Network configuration:
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Running
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-arm
-device virtio-net-device,netdev=net0,mac=52:54:00:12:34:02 -netdev
tap,id=net0,ifname=tap0,script=no,downscript=no -object
rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive
id=disk0,file=/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/core-image-minimal-beaglebone-yocto.rootfs.wic,if=none,format=raw
-device virtio-blk-device,drive=disk0 -device virtio-rng-device -machine virt
-cpu cortex-a15 -m 256 -device virtio-serial-device -chardev
socket,id=virtcon,port=34551,host=127.0.0.1 -device virtconsole,chardev=virtcon
-serial tcp:127.0.0.1:37613 -pidfile
/scratch1/sandeepg/yocto/yp-master/build-ci-master/pidfile_1057886 -S -qmp
unix:./.3x96s5zw,server,wait -qmp unix:./.pb069a_h,server,nowait -snapshot
-serial mon:stdio -nographic -kernel
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/deploy/images/beaglebone-yocto/zImage
-append 'root=/dev/vda2 rw mem=256M
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
console=ttyS0 console=ttyO0 console=ttyAMA0 console=ttyAMA0
systemd.mask=systemd-networkd printk.time=1'
runqemu - INFO - Host uptime: 3892744.82
QEMU 8.1.0 monitor - type 'help' for more information
(qemu)
DEBUG: Waiting at most 1000 seconds for login banner (09/25/23 11:06:10)
DEBUG: Connection from 127.0.0.1:41750
DEBUG: Partial boot log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host)
(arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils)
2.41.0.20230731) #1 PREEMPT Sat Mar 18 02:48:04 UTC 2023
[ 0.000000] CPU: ARMv7 Processor [414fc0f0] revision 0 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: linux,dummy-virt
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x4f000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000004fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000004fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000400000
DEBUG: Partial boot log:
00-0x000000004fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: root=/dev/vda2 rw mem=256M
ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
console=ttyS0 console=ttyO0 console=ttyAMA0 console=ttyAMA0
systemd.mask=systemd-networkd printk.time=1
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes,
linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes,
linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 220504K/262144K available (11264K kernel code, 1625K
rwdata, 3848K rodata,
DEBUG: Partial boot log:
1024K init, 521K bss, 25256K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 43655 entries in 129 pages
[ 0.000000] ftrace: allocated 128 pages with 1 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10
jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff
max_cycles: 0x1cd42e208c, max_idle_ns: 8815904053
DEBUG: Partial boot log:
14 ns
[ 0.000092] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every
4398046511096ns
[ 0.000184] Switching to timer-based delay loop, resolution 16ns
[ 0.001929] kfence: initialized - using 2097152 bytes for 255 objects at
0x(ptrval)-0x(ptrval)
[ 0.004058] Console: colour dummy device 80x30
[ 0.004935] Calibrating delay loop (skipped), value calculated using timer
frequency.. 125.00 BogoMIPS (lpj=625000)
[ 0.005049] pid_max: default: 32768 minimum: 301
[ 0.005484] LSM: Security Framework initializing
[ 0.006008] landlock: Up and running.
[ 0.007715] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 0.007747] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 0.019237] CPU: Testing write buffer coherency: ok
[ 0.020227] CPU0: Spectre v2: firmware did not set auxiliary control
register IBE bit, system vulnerable
[ 0.020317] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[ 0.029573] cblist_init_
DEBUG: Partial boot log:
generic: Setting adjustable number of callback queues.
[ 0.029658] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.029866] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.030133] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.030520] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.031269] rcu: Hierarchical SRCU implementation.
[ 0.031297] rcu: Max phase no-delay instances is 1000.
[ 0.037154] devtmpfs: initialized
[ 0.043039] VFP support v0.3: implementor 41 architecture 4 part 30 variant
f rev 0
[ 0.051071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
[ 0.056952] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.059651] pinctrl core: initialized pinctrl subsystem
[ 0.074581] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.088296] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.091009] thermal_sys: Registered therm
DEBUG: Partial boot log:
al governor 'step_wise'
[ 0.091359] cpuidle: using governor ladder
[ 0.091486] cpuidle: using governor menu
[ 0.092330] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.092375] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.093240] Serial: AMBA PL011 UART driver
[ 0.110490] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 20, base_baud =
0) is a PL011 rev1
[ 0.116054] printk: console [ttyAMA0] enabled
[ 0.133939] kprobes: kprobe jump-optimization is enabled. All kprobes are
optimized if possible.
[ 0.487287] raid6: int32x8 gen() 234 MB/s
DEBUG: Partial boot log:
[ 0.829875] raid6: int32x4 gen() 281 MB/s
DEBUG: Partial boot log:
[ 1.038524] raid6: int32x2 gen() 746 MB/s
DEBUG: Partial boot log:
[ 1.202793] raid6: int32x1 gen() 966 MB/s
[ 1.202905] raid6: using algorithm int32x1 gen() 966 MB/s
DEBUG: Partial boot log:
[ 1.374026] raid6: .... xor() 408 MB/s, rmw enabled
[ 1.374141] raid6: using intx1 recovery algorithm
[ 1.378285] SCSI subsystem initialized
[ 1.379090] usbcore: registered new interface driver usbfs
[ 1.379304] usbcore: registered new interface driver hub
[ 1.379476] usbcore: registered new device driver usb
[ 1.380254] pps_core: LinuxPPS API ver. 1 registered
[ 1.380320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 1.380459] PTP clock support registered
[ 1.390318] clocksource: Switched to clocksource arch_sys_counter
DEBUG: Partial boot log:
[ 1.522397] NET: Registered PF_INET protocol family
[ 1.523186] IP idents hash table entries: 4096 (order: 3, 32768 bytes,
linear)
[ 1.527123] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0,
4096 bytes, linear)
[ 1.527337] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ 1.527452] TCP established hash table entries: 2048 (order: 1, 8192 bytes,
linear)
[ 1.527572] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 1.527713] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.528361] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 1.528525] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 1.529463] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.531507] RPC: Registered named UNIX socket transport module.
[ 1.531613] RPC: Registered udp transport module.
[ 1.531665] RPC: Registered tcp transport module.
[ 1.531714] RPC: Registered tcp NFSv4.1 backchannel trans
DEBUG: Partial boot log:
port module.
[ 1.538447] Initialise system trusted keyrings
[ 1.539310] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 1.553024] NFS: Registering the id_resolver key type
[ 1.553265] Key type id_resolver registered
[ 1.553331] Key type id_legacy registered
[ 1.555135] Key type cifs.idmap registered
[ 1.601327] xor: measuring software checksum speed
[ 1.606883] arm4regs : 1888 MB/sec
[ 1.611745] 8regs : 2065 MB/sec
[ 1.617166] 32regs : 1863 MB/sec
[ 1.617235] xor: using function: 8regs (2065 MB/sec)
[ 1.617315] Key type asymmetric registered
[ 1.617394] Asymmetric key parser 'x509' registered
[ 1.617752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
248)
[ 1.617912] io scheduler mq-deadline registered
[ 1.618011] io scheduler kyber registered
[ 1.627873] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.666991] brd: module loaded
[ 1.667480] virtio_blk virt
DEBUG: Partial boot log:
io2: 1/0/0 default/read/poll queues
[ 1.670315] virtio_blk virtio2: [vda] 140434 512-byte logical blocks (71.9
MB/68.6 MiB)
[ 1.676986] vda: vda1 vda2
[ 1.679536] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.686196] usbcore: registered new interface driver usb-storage
[ 1.687256] SPI driver ads7846 has no spi_device_id for ti,tsc2046
[ 1.687336] SPI driver ads7846 has no spi_device_id for ti,ads7843
[ 1.687398] SPI driver ads7846 has no spi_device_id for ti,ads7845
[ 1.687456] SPI driver ads7846 has no spi_device_id for ti,ads7873
[ 1.690199] rtc-pl031 9010000.pl031: registered as rtc0
[ 1.690767] rtc-pl031 9010000.pl031: setting system clock to
2023-09-25T17:06:12 UTC (1695661572)
[ 1.691459] i2c_dev: i2c /dev entries driver
[ 1.692348] sdhci: Secure Digital Host Controller Interface driver
[ 1.692416] sdhci: Copyright(c) Pierre Ossman
[ 1.692472] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.693764] usbcore: registered new
DEBUG: Partial boot log:
interface driver usbhid
[ 1.693834] usbhid: USB HID core driver
[ 1.694588] u32 classifier
[ 1.694635] input device check on
[ 1.694677] Actions configured
[ 1.695886] NET: Registered PF_INET6 protocol family
[ 1.700375] Segment Routing with IPv6
[ 1.700565] In-situ OAM (IOAM) with IPv6
[ 1.701025] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.702787] NET: Registered PF_PACKET protocol family
[ 1.703225] Bridge firewalling registered
[ 1.703771] Key type dns_resolver registered
[ 1.704256] NET: Registered PF_VSOCK protocol family
[ 1.704795] ThumbEE CPU extension supported.
[ 1.706788] Loading compiled-in X.509 certificates
[ 1.707340] Key type .fscrypt registered
[ 1.707399] Key type fscrypt-provisioning registered
[ 1.711088] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 1.721912] Key type encrypted registered
[ 1.728940] printk: console [netcon0] enabled
[ 1.729042] netconsole: network logging s
DEBUG: Partial boot log:
tarted
[ 1.774199] IP-Config: Complete:
[ 1.774274] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2,
mask=255.255.255.0, gw=192.168.7.1
[ 1.774519] host=192.168.7.2, domain=, nis-domain=(none)
[ 1.774586] bootserver=255.255.255.255, rootserver=255.255.255.255,
rootpath=
[ 1.774613] nameserver0=8.8.8.8
[ 1.775746] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 1.783207] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.784429] platform regulatory.0: Direct firmware load for regulatory.db
failed with error -2
[ 1.784682] cfg80211: failed to load regulatory.db
[ 1.787919] uart-pl011 9000000.pl011: no DMA platform data
[ 1.815227] EXT4-fs (vda2): mounted filesystem with ordered data mode. Quota
mode: disabled.
[ 1.816307] VFS: Mounted root (ext4 filesystem) on device 254:2.
[ 1.818105] devtmpfs: mounted
[ 1.868909] Freeing unused kernel image (initmem) memory: 1024K
[ 1.871361] Run /s
DEBUG: Partial boot log:
bin/init as init process
INIT: version 3.04 booting
DEBUG: Partial boot log:
Starting udev
DEBUG: Partial boot log:
[ 2.497202] udevd[115]: starting version 3.2.12
[ 2.563924] udevd[116]: starting eudev-3.2.12
DEBUG: Partial boot log:
[ 3.675641] EXT4-fs (vda2): re-mounted. Quota mode: disabled.
DEBUG: Partial boot log:
Configuring packages on first boot....
DEBUG: Partial boot log:
[ 12.020990] platform gpio-keys: deferred probe pending
DEBUG: Partial boot log:
Poky (Yocto Project Reference Distro)
4.2+snapshot-8815eefb0d6218661794a58008e1144a77d3394f beaglebone-yocto
/dev/ttyAMA0
beaglebone-yocto login:
DEBUG: Reached login banner in 16.11 seconds (09/25/23 11:06:27)
DEBUG: Logged in as root in serial console
NOTE: Not starting HTTPService for directory tmp/deploy/deb/ which doesn't exist
NOTE: test_apt_install_from_repo (apt.AptRepoTest)
DEBUG: Checking if at least one of apt is installed
NOTE: ... skipped 'Test requires apt to be installed'
Test requires apt to be installed
NOTE: Stopped HTTPService on 0.0.0.0:0
NOTE: test_ping (ping.PingTest)
DEBUG: Setting up a 30 second(s) timeout
DEBUG: Removed SIGALRM handler
NOTE: ... FAIL
Stderr:
/usr/lib/python3.10/subprocess.py:1072: ResourceWarning: subprocess 1058093 is
still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Traceback (most recent call last):
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/runtime/cases/ping.py",
line 25, in test_ping
output += proc.communicate()[0].decode('utf-8')
File "/usr/lib/python3.10/subprocess.py", line 1141, in communicate
stdout = self.stdout.read()
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/core/decorator/oetimeout.py",
line 18, in _timeoutHandler
raise OEQATimeoutError("Timed out after %s "
oeqa.core.exception.OEQATimeoutError: Timed out after 30 seconds of execution
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/core/decorator/__init__.py",
line 35, in wrapped_f
return func(*args, **kwargs)
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/runtime/cases/ping.py",
line 32, in test_ping
self.fail("Ping timeout error for address %s, count %s, output: %s" %
(self.target.ip, count, output))
AssertionError: Ping timeout error for address 192.168.7.2, count 0, output:
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
NOTE: test_ssh (ssh.SSHTest)
DEBUG: Checking if at least one of openssh-sshd, dropbear is installed
NOTE: ... skipped 'Test requires openssh-sshd, or dropbear to be installed'
Test requires openssh-sshd, or dropbear to be installed
NOTE: test_cpio (buildcpio.BuildCpioTest)
DEBUG: Checking if at least one of autoconf is installed
NOTE: ... skipped 'Test requires autoconf to be installed'
Test requires autoconf to be installed
NOTE: test_galculator (buildgalculator.GalculatorTest)
DEBUG: Checking if at least one of gtk+3 is installed
NOTE: ... skipped 'Test requires gtk+3 to be installed'
Test requires gtk+3 to be installed
NOTE: test_lzip (buildlzip.BuildLzipTest)
DEBUG: Checking if at least one of autoconf is installed
NOTE: ... skipped 'Test requires autoconf to be installed'
Test requires autoconf to be installed
NOTE: test_connmand_help (connman.ConnmanTest)
DEBUG: Checking if at least one of connman is installed
NOTE: ... skipped 'Test requires connman to be installed'
Test requires connman to be installed
NOTE: test_connmand_running (connman.ConnmanTest)
NOTE: ... skipped "Test case connman.ConnmanTest.test_connmand_running depends
on connman.ConnmanTest.test_connmand_help but it didn't pass/run."
Test case connman.ConnmanTest.test_connmand_running depends on
connman.ConnmanTest.test_connmand_help but it didn't pass/run.
NOTE: test_date (date.DateTest)
DEBUG: Checking if at least one of coreutils, busybox is installed
NOTE: ... skipped "Test case date.DateTest.test_date depends on
ssh.SSHTest.test_ssh but it didn't pass/run."
Test case date.DateTest.test_date depends on ssh.SSHTest.test_ssh but it didn't
pass/run.
NOTE: test_df (df.DfTest)
DEBUG: Checking if 'IMAGE_FEATURES' value contains 'read-only-rootfs' to skip
the test
DEBUG: Checking if at least one of coreutils, busybox is installed
NOTE: ... skipped "Test case df.DfTest.test_df depends on ssh.SSHTest.test_ssh
but it didn't pass/run."
Test case df.DfTest.test_df depends on ssh.SSHTest.test_ssh but it didn't
pass/run.
NOTE: test_dnf_help (dnf.DnfBasicTest)
NOTE: ... skipped "Test case dnf.DnfBasicTest.test_dnf_help depends on
ssh.SSHTest.test_ssh but it didn't pass/run."
Test case dnf.DnfBasicTest.test_dnf_help depends on ssh.SSHTest.test_ssh but it
didn't pass/run.
NOTE: test_dnf_history (dnf.DnfBasicTest)
NOTE: ... skipped "Test case dnf.DnfBasicTest.test_dnf_history depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run."
Test case dnf.DnfBasicTest.test_dnf_history depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run.
NOTE: test_dnf_info (dnf.DnfBasicTest)
NOTE: ... skipped "Test case dnf.DnfBasicTest.test_dnf_info depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run."
Test case dnf.DnfBasicTest.test_dnf_info depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run.
NOTE: test_dnf_search (dnf.DnfBasicTest)
NOTE: ... skipped "Test case dnf.DnfBasicTest.test_dnf_search depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run."
Test case dnf.DnfBasicTest.test_dnf_search depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run.
NOTE: test_dnf_version (dnf.DnfBasicTest)
NOTE: ... skipped "Test case dnf.DnfBasicTest.test_dnf_version depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run."
Test case dnf.DnfBasicTest.test_dnf_version depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run.
NOTE: Started HTTPService for
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0/oe-testimage-repo
on 0.0.0.0:37009
NOTE: test_dnf_makecache (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_makecache depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_makecache depends on
dnf.DnfBasicTest.test_dnf_help but it didn't pass/run.
NOTE: test_dnf_exclude (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_exclude depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_exclude depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run.
NOTE: test_dnf_install (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_install depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_install depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run.
NOTE: test_dnf_install_dependency (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_install_dependency
depends on dnf.DnfRepoTest.test_dnf_install but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_install_dependency depends on
dnf.DnfRepoTest.test_dnf_install but it didn't pass/run.
NOTE: test_dnf_install_from_disk (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_install_from_disk
depends on dnf.DnfRepoTest.test_dnf_install_dependency but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_install_from_disk depends on
dnf.DnfRepoTest.test_dnf_install_dependency but it didn't pass/run.
NOTE: test_dnf_install_from_http (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_install_from_http
depends on dnf.DnfRepoTest.test_dnf_install_from_disk but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_install_from_http depends on
dnf.DnfRepoTest.test_dnf_install_from_disk but it didn't pass/run.
NOTE: test_dnf_installroot (dnf.DnfRepoTest)
DEBUG: Checking if at least one of busybox is installed
DEBUG: Checking if 'DISTRO_FEATURES' value contains 'usrmerge' to skip the test
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_installroot depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_installroot depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run.
NOTE: test_dnf_installroot_usrmerge (dnf.DnfRepoTest)
DEBUG: Checking if at least one of busybox is installed
DEBUG: Checking if 'DISTRO_FEATURES' value contains 'usrmerge' to run the test
NOTE: ... skipped 'Test run when enable usrmerge'
Test run when enable usrmerge
NOTE: test_dnf_reinstall (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_reinstall depends on
dnf.DnfRepoTest.test_dnf_install but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_reinstall depends on
dnf.DnfRepoTest.test_dnf_install but it didn't pass/run.
NOTE: test_dnf_repoinfo (dnf.DnfRepoTest)
NOTE: ... skipped "Test case dnf.DnfRepoTest.test_dnf_repoinfo depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run."
Test case dnf.DnfRepoTest.test_dnf_repoinfo depends on
dnf.DnfRepoTest.test_dnf_makecache but it didn't pass/run.
NOTE: Stopped HTTPService on 0.0.0.0:37009
NOTE: test_gcc_compile (gcc.GccCompileTest)
DEBUG: Checking if at least one of gcc is installed
NOTE: ... skipped 'Test requires gcc to be installed'
Test requires gcc to be installed
NOTE: test_gpp2_compile (gcc.GccCompileTest)
DEBUG: Checking if at least one of g++ is installed
NOTE: ... skipped 'Test requires g++ to be installed'
Test requires g++ to be installed
NOTE: test_gpp_compile (gcc.GccCompileTest)
DEBUG: Checking if at least one of g++ is installed
NOTE: ... skipped 'Test requires g++ to be installed'
Test requires g++ to be installed
NOTE: test_make (gcc.GccCompileTest)
DEBUG: Checking if at least one of make is installed
NOTE: ... skipped 'Test requires make to be installed'
Test requires make to be installed
NOTE: test_python (gi.GObjectIntrospectionTest)
DEBUG: Checking if at least one of python3-pygobject is installed
NOTE: ... skipped 'Test requires python3-pygobject to be installed'
Test requires python3-pygobject to be installed
NOTE: test_gohelloworld (go.GoHelloworldTest)
DEBUG: Checking if at least one of go-helloworld is installed
NOTE: ... skipped 'Test requires go-helloworld to be installed'
Test requires go-helloworld to be installed
NOTE: test_kernel_module (kernelmodule.KernelModuleTest)
DEBUG: Checking if at least one of gcc is installed
NOTE: ... skipped 'Test requires gcc to be installed'
Test requires gcc to be installed
NOTE: test_ldd (ldd.LddTest)
NOTE: ... skipped "Test case ldd.LddTest.test_ldd depends on
ssh.SSHTest.test_ssh but it didn't pass/run."
Test case ldd.LddTest.test_ldd depends on ssh.SSHTest.test_ssh but it didn't
pass/run.
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; cp /etc/logrotate.d/wtmp $HOME/wtmp.oeqabak
DEBUG: Waiting for process output: time: 1695661620.2567408, endtime:
1695661920.2555702
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661621.9548244, endtime:
1695661921.954823
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 1.90 seconds]
DEBUG: Command: cp /etc/logrotate.d/wtmp $HOME/wtmp.oeqabak
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
NOTE: test_logrotate_wtmp (logrotate.LogrotateTest)
DEBUG: Checking if at least one of logrotate is installed
NOTE: ... skipped 'Test requires logrotate to be installed'
Test requires logrotate to be installed
NOTE: test_logrotate_newlog (logrotate.LogrotateTest)
NOTE: ... skipped "Test case logrotate.LogrotateTest.test_logrotate_newlog
depends on logrotate.LogrotateTest.test_logrotate_wtmp but it didn't pass/run."
Test case logrotate.LogrotateTest.test_logrotate_newlog depends on
logrotate.LogrotateTest.test_logrotate_wtmp but it didn't pass/run.
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; mv -f $HOME/wtmp.oeqabak
/etc/logrotate.d/wtmp && rm -rf /var/log//logrotate_dir
DEBUG: Waiting for process output: time: 1695661628.784178, endtime:
1695661928.783313
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661632.066594, endtime:
1695661932.0665927
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 3.48 seconds]
DEBUG: Command: mv -f $HOME/wtmp.oeqabak /etc/logrotate.d/wtmp && rm -rf
/var/log//logrotate_dir
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; rm -rf /var/log/logrotate_testfile && rm
-rf /etc/logrotate.d/logrotate_testfile
DEBUG: Waiting for process output: time: 1695661638.599366, endtime:
1695661938.5985968
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661641.8585541, endtime:
1695661941.8585532
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 3.46 seconds]
DEBUG: Command: rm -rf /var/log/logrotate_testfile && rm -rf
/etc/logrotate.d/logrotate_testfile
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
NOTE: test_syslog_running (oe_syslog.SyslogTest)
DEBUG: Checking if at least one of rsyslog, sysklogd, syslog-ng, busybox-syslog
is installed
NOTE: ... skipped "Test case oe_syslog.SyslogTest.test_syslog_running depends
on ssh.SSHTest.test_ssh but it didn't pass/run."
Test case oe_syslog.SyslogTest.test_syslog_running depends on
ssh.SSHTest.test_ssh but it didn't pass/run.
NOTE: test_syslog_logger (oe_syslog.SyslogTestConfig)
NOTE: ... skipped "Test case oe_syslog.SyslogTestConfig.test_syslog_logger
depends on oe_syslog.SyslogTest.test_syslog_running but it didn't pass/run."
Test case oe_syslog.SyslogTestConfig.test_syslog_logger depends on
oe_syslog.SyslogTest.test_syslog_running but it didn't pass/run.
NOTE: test_syslog_restart (oe_syslog.SyslogTestConfig)
NOTE: ... skipped "Test case oe_syslog.SyslogTestConfig.test_syslog_restart
depends on oe_syslog.SyslogTest.test_syslog_running but it didn't pass/run."
Test case oe_syslog.SyslogTestConfig.test_syslog_restart depends on
oe_syslog.SyslogTest.test_syslog_running but it didn't pass/run.
NOTE: test_syslog_startup_config (oe_syslog.SyslogTestConfig)
DEBUG: Checking if 'VIRTUAL-RUNTIME_init_manager' value is 'systemd' to skip
test
DEBUG: Checking if at least one of busybox-syslog is installed
NOTE: ... skipped "Test case
oe_syslog.SyslogTestConfig.test_syslog_startup_config depends on
oe_syslog.SyslogTestConfig.test_syslog_logger but it didn't pass/run."
Test case oe_syslog.SyslogTestConfig.test_syslog_startup_config depends on
oe_syslog.SyslogTestConfig.test_syslog_logger but it didn't pass/run.
NOTE: test_opkg_install_from_repo (opkg.OpkgRepoTest)
DEBUG: Checking if at least one of opkg is installed
NOTE: ... skipped 'Test requires opkg to be installed'
Test requires opkg to be installed
NOTE: test_pam (pam.PamBasicTest)
DEBUG: Checking if at least one of shadow-base is installed
NOTE: ... skipped 'Test requires shadow-base to be installed'
Test requires shadow-base to be installed
NOTE: test_parselogs (parselogs.ParseLogsTest)
NOTE: ... skipped "Test case parselogs.ParseLogsTest.test_parselogs depends on
ssh.SSHTest.test_ssh but it didn't pass/run."
Test case parselogs.ParseLogsTest.test_parselogs depends on
ssh.SSHTest.test_ssh but it didn't pass/run.
NOTE: test_perl_works (perl.PerlTest)
DEBUG: Checking if at least one of perl is installed
NOTE: ... skipped 'Test requires perl to be installed'
Test requires perl to be installed
NOTE: test_ptestrunner_expectfail (ptest.PtestRunnerTest)
DEBUG: Checking if at least one of ptest-runner is installed
NOTE: ... skipped 'Test requires ptest-runner to be installed'
Test requires ptest-runner to be installed
NOTE: test_ptestrunner_expectsuccess (ptest.PtestRunnerTest)
DEBUG: Checking if at least one of ptest-runner is installed
NOTE: ... skipped 'Test requires ptest-runner to be installed'
Test requires ptest-runner to be installed
NOTE: test_python3 (python.PythonTest)
DEBUG: Checking if at least one of python3-core is installed
NOTE: ... skipped 'Test requires python3-core to be installed'
Test requires python3-core to be installed
NOTE: test_rpm_help (rpm.RpmBasicTest)
NOTE: ... skipped "Test case rpm.RpmBasicTest.test_rpm_help depends on
ssh.SSHTest.test_ssh but it didn't pass/run."
Test case rpm.RpmBasicTest.test_rpm_help depends on ssh.SSHTest.test_ssh but it
didn't pass/run.
NOTE: test_rpm_query (rpm.RpmBasicTest)
NOTE: ... skipped "Test case rpm.RpmBasicTest.test_rpm_query depends on
rpm.RpmBasicTest.test_rpm_help but it didn't pass/run."
Test case rpm.RpmBasicTest.test_rpm_query depends on
rpm.RpmBasicTest.test_rpm_help but it didn't pass/run.
NOTE: test_rpm_query_nonroot (rpm.RpmBasicTest)
NOTE: ... skipped "Test case rpm.RpmBasicTest.test_rpm_query_nonroot depends
on rpm.RpmBasicTest.test_rpm_query but it didn't pass/run."
Test case rpm.RpmBasicTest.test_rpm_query_nonroot depends on
rpm.RpmBasicTest.test_rpm_query but it didn't pass/run.
NOTE: test_rpm_install (rpm.RpmInstallRemoveTest)
NOTE: ... skipped "Test case rpm.RpmInstallRemoveTest.test_rpm_install depends
on rpm.RpmBasicTest.test_rpm_query but it didn't pass/run."
Test case rpm.RpmInstallRemoveTest.test_rpm_install depends on
rpm.RpmBasicTest.test_rpm_query but it didn't pass/run.
NOTE: test_rpm_remove (rpm.RpmInstallRemoveTest)
NOTE: ... skipped "Test case rpm.RpmInstallRemoveTest.test_rpm_remove depends
on rpm.RpmInstallRemoveTest.test_rpm_install but it didn't pass/run."
Test case rpm.RpmInstallRemoveTest.test_rpm_remove depends on
rpm.RpmInstallRemoveTest.test_rpm_install but it didn't pass/run.
NOTE: test_check_rpm_install_removal_log_file_size (rpm.RpmInstallRemoveTest)
NOTE: ... skipped "Test case
rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size depends
on rpm.RpmInstallRemoveTest.test_rpm_remove but it didn't pass/run."
Test case rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size
depends on rpm.RpmInstallRemoveTest.test_rpm_remove but it didn't pass/run.
NOTE: test_rust_c_lib_example (rust.RustCLibExampleTest)
DEBUG: Checking if at least one of rust-c-lib-example-bin is installed
NOTE: ... skipped 'Test requires rust-c-lib-example-bin to be installed'
Test requires rust-c-lib-example-bin to be installed
NOTE: test_cargo_compile (rust.RustCompileTest)
DEBUG: Checking if at least one of openssh-scp is installed
NOTE: ... skipped 'Test requires openssh-scp to be installed'
Test requires openssh-scp to be installed
NOTE: test_rust_compile (rust.RustCompileTest)
DEBUG: Checking if at least one of openssh-scp is installed
NOTE: ... skipped 'Test requires openssh-scp to be installed'
Test requires openssh-scp to be installed
NOTE: test_scp_file (scp.ScpTest)
DEBUG: Checking if at least one of openssh-scp is installed
NOTE: ... skipped 'Test requires openssh-scp to be installed'
Test requires openssh-scp to be installed
NOTE: test_stap (stap.StapTest)
DEBUG: Checking if at least one of kernel-devsrc is installed
NOTE: ... skipped 'Test requires kernel-devsrc to be installed'
Test requires kernel-devsrc to be installed
NOTE: test_systemd_basic (systemd.SystemdBasicTests)
NOTE: ... skipped "Test case systemd.SystemdBasicTests.test_systemd_basic
depends on ssh.SSHTest.test_ssh but it didn't pass/run."
Test case systemd.SystemdBasicTests.test_systemd_basic depends on
ssh.SSHTest.test_ssh but it didn't pass/run.
NOTE: test_systemd_failed (systemd.SystemdBasicTests)
NOTE: ... skipped "Test case systemd.SystemdBasicTests.test_systemd_failed
depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run."
Test case systemd.SystemdBasicTests.test_systemd_failed depends on
systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.
NOTE: test_systemd_list (systemd.SystemdBasicTests)
NOTE: ... skipped "Test case systemd.SystemdBasicTests.test_systemd_list
depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run."
Test case systemd.SystemdBasicTests.test_systemd_list depends on
systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.
NOTE: test_systemd_boot_time (systemd.SystemdJournalTests)
NOTE: ... skipped "Test case
systemd.SystemdJournalTests.test_systemd_boot_time depends on
systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run."
Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on
systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.
NOTE: test_systemd_journal (systemd.SystemdJournalTests)
NOTE: ... skipped "Test case systemd.SystemdJournalTests.test_systemd_journal
depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run."
Test case systemd.SystemdJournalTests.test_systemd_journal depends on
systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.
NOTE: test_systemd_status (systemd.SystemdServiceTests)
NOTE: ... skipped "Test case systemd.SystemdServiceTests.test_systemd_status
depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run."
Test case systemd.SystemdServiceTests.test_systemd_status depends on
systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.
NOTE: test_systemd_disable_enable (systemd.SystemdServiceTests)
DEBUG: Checking if read-only-rootfs is not in DISTRO_FEATURES or IMAGE_FEATURES
NOTE: ... skipped "Test case
systemd.SystemdServiceTests.test_systemd_disable_enable depends on
systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run."
Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on
systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.
NOTE: test_systemd_disable_enable_ro (systemd.SystemdServiceTests)
DEBUG: Checking if read-only-rootfs is in DISTRO_FEATURES or IMAGE_FEATURES
NOTE: ... skipped 'Test is only meant to run with read-only-rootfs in
IMAGE_FEATURES'
Test is only meant to run with read-only-rootfs in IMAGE_FEATURES
NOTE: test_systemd_stop_start (systemd.SystemdServiceTests)
NOTE: ... skipped "Test case
systemd.SystemdServiceTests.test_systemd_stop_start depends on
systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run."
Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on
systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.
NOTE: test_wayland_info (weston.WestonTest)
DEBUG: Checking if at least one of wayland-utils is installed
NOTE: ... skipped 'Test requires wayland-utils to be installed'
Test requires wayland-utils to be installed
NOTE: test_weston_can_initialize_new_wayland_compositor (weston.WestonTest)
DEBUG: Checking if at least one of weston is installed
NOTE: ... skipped 'Test requires weston to be installed'
Test requires weston to be installed
NOTE: test_weston_running (weston.WestonTest)
DEBUG: Checking if at least one of weston is installed
NOTE: ... skipped 'Test requires weston to be installed'
Test requires weston to be installed
NOTE: test_weston_supports_xwayland (weston.WestonTest)
DEBUG: Checking if at least one of weston is installed
NOTE: ... skipped 'Test requires weston to be installed'
Test requires weston to be installed
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; rm /tmp/weston-2.log
DEBUG: Waiting for process output: time: 1695661642.349397, endtime:
1695661942.348621
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661644.9306302, endtime:
1695661944.930629
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 2.78 seconds]
DEBUG: Command: rm /tmp/weston-2.log
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
NOTE: test_xorg_running (xorg.XorgTest)
DEBUG: Checking if at least one of xserver-nodm-init is installed
NOTE: ... skipped 'Test requires xserver-nodm-init to be installed'
Test requires xserver-nodm-init to be installed
NOTE: ======================================================================
NOTE: FAIL: test_ping (ping.PingTest)
NOTE: ----------------------------------------------------------------------
NOTE: Traceback (most recent call last):
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/runtime/cases/ping.py",
line 25, in test_ping
output += proc.communicate()[0].decode('utf-8')
File "/usr/lib/python3.10/subprocess.py", line 1141, in communicate
stdout = self.stdout.read()
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/core/decorator/oetimeout.py",
line 18, in _timeoutHandler
raise OEQATimeoutError("Timed out after %s "
oeqa.core.exception.OEQATimeoutError: Timed out after 30 seconds of execution
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/core/decorator/__init__.py",
line 35, in wrapped_f
return func(*args, **kwargs)
File
"/scratch1/sandeepg/yocto/yp-master/sources/poky/meta/lib/oeqa/runtime/cases/ping.py",
line 32, in test_ping
self.fail("Ping timeout error for address %s, count %s, output: %s" %
(self.target.ip, count, output))
AssertionError: Ping timeout error for address 192.168.7.2, count 0, output:
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data.
From 192.168.7.1 icmp_seq=1 Destination Host Unreachable
--- 192.168.7.2 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
NOTE: ----------------------------------------------------------------------
NOTE: Ran 71 tests in 55.191s
NOTE: FAILED
NOTE: (failures=1, skipped=70)
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; for p in /var/log; do if [ -e $p ]; then
echo $p; fi; done
DEBUG: Waiting for process output: time: 1695661645.4184873, endtime:
1695661945.4174936
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661648.0026083, endtime:
1695661948.0026073
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 2.79 seconds]
DEBUG: Command: for p in /var/log; do if [ -e $p ]; then echo $p; fi; done
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
NOTE: No file/directory matching path /var/log
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; for p in /etc/version; do if [ -e $p ];
then echo $p; fi; done
DEBUG: Waiting for process output: time: 1695661648.4909086, endtime:
1695661948.490181
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661651.0746307, endtime:
1695661951.0746295
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 2.78 seconds]
DEBUG: Command: for p in /etc/version; do if [ -e $p ]; then echo $p; fi; done
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
NOTE: No file/directory matching path /etc/version
DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o
ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o
StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.2 export
PATH=/usr/sbin:/sbin:/usr/bin:/bin; for p in /etc/os-release; do if [ -e $p ];
then echo $p; fi; done
DEBUG: Waiting for process output: time: 1695661651.5592241, endtime:
1695661951.557732
DEBUG: Partial data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: Waiting for process output: time: 1695661654.1468132, endtime:
1695661954.1468117
DEBUG: Data from SSH call:
ssh: connect to host 192.168.7.2 port 22: No route to host
DEBUG: [Command returned '255' after 2.79 seconds]
DEBUG: Command: for p in /etc/os-release; do if [ -e $p ]; then echo $p; fi;
done
Status: 255 Output: ssh: connect to host 192.168.7.2 port 22: No route to host
NOTE: No file/directory matching path /etc/os-release
WARNING: Could not load artifacts list, skip artifacts retrieval
DEBUG: Stopping logging thread
DEBUG: Stop event received
DEBUG: Tearing down logging thread
DEBUG: Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 3892834.06
tput: No value for $TERM and no -T specified
RESULTS:
RESULTS - apt.AptRepoTest.test_apt_install_from_repo: SKIPPED (0.00s)
RESULTS - buildcpio.BuildCpioTest.test_cpio: SKIPPED (0.00s)
RESULTS - buildgalculator.GalculatorTest.test_galculator: SKIPPED (0.00s)
RESULTS - buildlzip.BuildLzipTest.test_lzip: SKIPPED (0.00s)
RESULTS - connman.ConnmanTest.test_connmand_help: SKIPPED (0.00s)
RESULTS - connman.ConnmanTest.test_connmand_running: SKIPPED (0.00s)
RESULTS - date.DateTest.test_date: SKIPPED (0.00s)
RESULTS - df.DfTest.test_df: SKIPPED (0.00s)
RESULTS - dnf.DnfBasicTest.test_dnf_help: SKIPPED (0.00s)
RESULTS - dnf.DnfBasicTest.test_dnf_history: SKIPPED (0.00s)
RESULTS - dnf.DnfBasicTest.test_dnf_info: SKIPPED (0.00s)
RESULTS - dnf.DnfBasicTest.test_dnf_search: SKIPPED (0.00s)
RESULTS - dnf.DnfBasicTest.test_dnf_version: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_exclude: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_install: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_install_dependency: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_install_from_disk: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_install_from_http: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_installroot: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_installroot_usrmerge: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_makecache: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_reinstall: SKIPPED (0.00s)
RESULTS - dnf.DnfRepoTest.test_dnf_repoinfo: SKIPPED (0.00s)
RESULTS - gcc.GccCompileTest.test_gcc_compile: SKIPPED (0.00s)
RESULTS - gcc.GccCompileTest.test_gpp2_compile: SKIPPED (0.00s)
RESULTS - gcc.GccCompileTest.test_gpp_compile: SKIPPED (0.00s)
RESULTS - gcc.GccCompileTest.test_make: SKIPPED (0.00s)
RESULTS - gi.GObjectIntrospectionTest.test_python: SKIPPED (0.00s)
RESULTS - go.GoHelloworldTest.test_gohelloworld: SKIPPED (0.00s)
RESULTS - kernelmodule.KernelModuleTest.test_kernel_module: SKIPPED (0.00s)
RESULTS - ldd.LddTest.test_ldd: SKIPPED (0.00s)
RESULTS - logrotate.LogrotateTest.test_logrotate_newlog: SKIPPED (0.00s)
RESULTS - logrotate.LogrotateTest.test_logrotate_wtmp: SKIPPED (0.00s)
RESULTS - oe_syslog.SyslogTest.test_syslog_running: SKIPPED (0.00s)
RESULTS - oe_syslog.SyslogTestConfig.test_syslog_logger: SKIPPED (0.00s)
RESULTS - oe_syslog.SyslogTestConfig.test_syslog_restart: SKIPPED (0.00s)
RESULTS - oe_syslog.SyslogTestConfig.test_syslog_startup_config: SKIPPED (0.00s)
RESULTS - opkg.OpkgRepoTest.test_opkg_install_from_repo: SKIPPED (0.00s)
RESULTS - pam.PamBasicTest.test_pam: SKIPPED (0.00s)
RESULTS - parselogs.ParseLogsTest.test_parselogs: SKIPPED (0.00s)
RESULTS - perl.PerlTest.test_perl_works: SKIPPED (0.00s)
RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectfail: SKIPPED (0.00s)
RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectsuccess: SKIPPED (0.00s)
RESULTS - python.PythonTest.test_python3: SKIPPED (0.00s)
RESULTS - rpm.RpmBasicTest.test_rpm_help: SKIPPED (0.00s)
RESULTS - rpm.RpmBasicTest.test_rpm_query: SKIPPED (0.00s)
RESULTS - rpm.RpmBasicTest.test_rpm_query_nonroot: SKIPPED (0.00s)
RESULTS -
rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size: SKIPPED
(0.00s)
RESULTS - rpm.RpmInstallRemoveTest.test_rpm_install: SKIPPED (0.00s)
RESULTS - rpm.RpmInstallRemoveTest.test_rpm_remove: SKIPPED (0.00s)
RESULTS - rust.RustCLibExampleTest.test_rust_c_lib_example: SKIPPED (0.00s)
RESULTS - rust.RustCompileTest.test_cargo_compile: SKIPPED (0.00s)
RESULTS - rust.RustCompileTest.test_rust_compile: SKIPPED (0.00s)
RESULTS - scp.ScpTest.test_scp_file: SKIPPED (0.00s)
RESULTS - ssh.SSHTest.test_ssh: SKIPPED (0.00s)
RESULTS - stap.StapTest.test_stap: SKIPPED (0.00s)
RESULTS - systemd.SystemdBasicTests.test_systemd_basic: SKIPPED (0.00s)
RESULTS - systemd.SystemdBasicTests.test_systemd_failed: SKIPPED (0.00s)
RESULTS - systemd.SystemdBasicTests.test_systemd_list: SKIPPED (0.00s)
RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time: SKIPPED (0.00s)
RESULTS - systemd.SystemdJournalTests.test_systemd_journal: SKIPPED (0.00s)
RESULTS - systemd.SystemdServiceTests.test_systemd_disable_enable: SKIPPED
(0.00s)
RESULTS - systemd.SystemdServiceTests.test_systemd_disable_enable_ro: SKIPPED
(0.00s)
RESULTS - systemd.SystemdServiceTests.test_systemd_status: SKIPPED (0.00s)
RESULTS - systemd.SystemdServiceTests.test_systemd_stop_start: SKIPPED (0.00s)
RESULTS - weston.WestonTest.test_wayland_info: SKIPPED (0.00s)
RESULTS - weston.WestonTest.test_weston_can_initialize_new_wayland_compositor:
SKIPPED (0.00s)
RESULTS - weston.WestonTest.test_weston_running: SKIPPED (0.00s)
RESULTS - weston.WestonTest.test_weston_supports_xwayland: SKIPPED (0.00s)
RESULTS - xorg.XorgTest.test_xorg_running: SKIPPED (0.00s)
RESULTS - ping.PingTest.test_ping: FAILED (30.01s)
SUMMARY:
core-image-minimal () - Ran 71 tests in 55.191s
core-image-minimal - FAIL - Required tests failed (successes=0, skipped=70,
failures=1, errors=0)
ERROR: core-image-minimal - FAILED - also check the logs in
/scratch1/sandeepg/yocto/yp-master/build-ci-master/tmp/log
Too many errors when dumping data from target, assuming it is dead! Will not
dump data anymore!
Too many errors when dumping data from target, assuming it is dead! Will not
dump data anymore!
Too many errors when dumping data from target, assuming it is dead! Will not
dump data anymore!
DEBUG: Python function do_testimage finished
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#188257):
https://lists.openembedded.org/g/openembedded-core/message/188257
Mute This Topic: https://lists.openembedded.org/mt/101578999/21656
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
