I have tried that and there are no A/B dirs in there. I can find u-boot...ipk and some other stuff but there is no evidence that the A/B dirs ever existed.
Jocke On Mon, 2023-12-18 at 17:20 +0100, Alexander Kanavin wrote: > I suppose you can run oe-selftest again with -K, then its build > directories (a and b ones) will be preserved and you can inspect them. > > Alex > > On Mon, 18 Dec 2023 at 14:58, Joakim Tjernlund > <[email protected]> wrote: > > > > Sounds plausible but how is that possible? I don't understand what those > > tweaks are(unless you > > mean the SOURCE_DATE_EPOCH="$(date +%s)" tweak) > > Maybe I should try without SSTATE cache at all just to see if that make a > > difference? > > > > Jocke > > > > On Mon, 2023-12-18 at 14:11 +0100, Alexander Kanavin wrote: > > > The short execution time is suspicious. The test is written so that > > > build B doesn't reuse the cache from build A, and if it does because > > > of your local tweaks, then you're probably just comparing the A > > > package with itself. > > > > > > Alex > > > > > > On Mon, 18 Dec 2023 at 12:20, Joakim Tjernlund via > > > lists.openembedded.org > > > <[email protected]> wrote: > > > > > > > > I setup above test for reproducible builds and build one pkg(u-boot) > > > > and try to force a > > > > non-reproducible build to test the framework: > > > > --- a/meta/recipes-bsp/u-boot/u-boot.inc > > > > +++ b/meta/recipes-bsp/u-boot/u-boot.inc > > > > @@ -9,7 +9,7 @@ inherit uboot-config uboot-extlinux-config uboot-sign > > > > deploy python3native kerne > > > > > > > > DEPENDS += "swig-native" > > > > > > > > -EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc > > > > ${TOOLCHAIN_OPTIONS}" V=1' > > > > +EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc > > > > ${TOOLCHAIN_OPTIONS}" V=1 SOURCE_DATE_EPOCH="$(date +%s)"' > > > > EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"' > > > > EXTRA_OEMAKE += 'STAGING_INCDIR=${STAGING_INCDIR_NATIVE} > > > > STAGING_LIBDIR=${STAGING_LIBDIR_NATIVE}' > > > > > > > > forcing EPOCH to current build date but I still get an success report: > > > > > > > > oe-selftest -v -r > > > > reproducible.ReproducibleTests.test_reproducible_builds > > > > 2023-12-18 12:05:22,355 - oe-selftest - INFO - Adding layer libraries: > > > > 2023-12-18 12:05:22,356 - oe-selftest - INFO - > > > > /home/jocke/yocto-xr/3pp/poky/meta/lib > > > > 2023-12-18 12:05:22,356 - oe-selftest - INFO - > > > > /home/jocke/yocto-xr/3pp/poky/meta-yocto-bsp/lib > > > > 2023-12-18 12:05:22,356 - oe-selftest - INFO - > > > > /home/jocke/yocto-xr/3pp/meta-openembedded/meta-oe/lib > > > > 2023-12-18 12:05:22,356 - oe-selftest - INFO - > > > > /home/jocke/yocto-xr/meta-xr/lib > > > > 2023-12-18 12:05:22,356 - oe-selftest - INFO - > > > > /home/jocke/yocto-xr/3pp/poky/meta-selftest/lib > > > > 2023-12-18 12:05:22,359 - oe-selftest - INFO - Running bitbake -e to > > > > test the configuration is valid/parsable > > > > 2023-12-18 12:05:27,248 - oe-selftest - INFO - Adding: "include > > > > selftest.inc" in > > > > /home/jocke/yocto-xr/build/infn-xr/gmcu-st/conf/local.conf > > > > 2023-12-18 12:05:27,248 - oe-selftest - INFO - Adding: "include > > > > bblayers.inc" in bblayers.conf > > > > 2023-12-18 12:05:27,248 - oe-selftest - INFO - test_reproducible_builds > > > > (reproducible.ReproducibleTests) > > > > 2023-12-18 12:05:29,724 - oe-selftest - DEBUG - Writing to: > > > > /home/jocke/yocto-xr/build/infn-xr/gmcu-st/conf/selftest.inc > > > > > > > > > > > > 2023-12-18 12:08:26,539 - oe-selftest - INFO - Building reproducibleA > > > > (sstate allowed)... > > > > 2023-12-18 12:08:26,545 - oe-selftest - DEBUG - Writing to: > > > > /home/jocke/yocto-xr/build/infn-xr/gmcu-st/conf/selftest.inc > > > > PACKAGE_CLASSES = "package_ipk" > > > > INHIBIT_PACKAGE_STRIP = "1" > > > > TMPDIR = "/home/jocke/yocto-xr/build/infn-xr/reproducibleA/tmp" > > > > LICENSE_FLAGS_ACCEPTED = "commercial" > > > > DISTRO_FEATURES:append = ' systemd pam' > > > > USERADDEXTENSION = "useradd-staticids" > > > > USERADD_ERROR_DYNAMIC = "skip" > > > > USERADD_UID_TABLES += "files/static-passwd" > > > > USERADD_GID_TABLES += "files/static-group" > > > > > > > > > > > > 2023-12-18 12:09:08,936 - oe-selftest - INFO - Building reproducibleB > > > > (sstate NOT allowed)... > > > > 2023-12-18 12:09:08,937 - oe-selftest - DEBUG - Writing to: > > > > /home/jocke/yocto-xr/build/infn-xr/gmcu-st/conf/selftest.inc > > > > PACKAGE_CLASSES = "package_ipk" > > > > INHIBIT_PACKAGE_STRIP = "1" > > > > TMPDIR = "/home/jocke/yocto-xr/build/infn-xr/reproducibleB/tmp" > > > > LICENSE_FLAGS_ACCEPTED = "commercial" > > > > DISTRO_FEATURES:append = ' systemd pam' > > > > USERADDEXTENSION = "useradd-staticids" > > > > USERADD_ERROR_DYNAMIC = "skip" > > > > USERADD_UID_TABLES += "files/static-passwd" > > > > USERADD_GID_TABLES += "files/static-group" > > > > SSTATE_DIR = "${TMPDIR}/sstate" > > > > SSTATE_MIRRORS = "file://.*/.*-native.* > > > > http://sstate.yoctoproject.org/all/PATH;downloadfilename=PATH > > > > file://.*/.*-cross.* > > > > http://sstate.yoctoproject.org/all/PATH;downloadfilename=PATH"; > > > > > > > > > > > > 2023-12-18 12:09:24,772 - oe-selftest - INFO - Checking ipk packages > > > > for differences... > > > > 2023-12-18 12:09:24,843 - oe-selftest - INFO - Reproducibility summary > > > > for ipk: same=4 different=0 different_excluded=0 missing=0 total=4 > > > > unused_exclusions=[] > > > > 2023-12-18 12:09:24,847 - oe-selftest - INFO - ... ok > > > > 2023-12-18 12:09:26,044 - oe-selftest - INFO - > > > > ---------------------------------------------------------------------- > > > > 2023-12-18 12:09:26,044 - oe-selftest - INFO - Ran 1 test in 241.335s > > > > 2023-12-18 12:09:26,045 - oe-selftest - INFO - OK > > > > 2023-12-18 12:09:32,355 - oe-selftest - INFO - RESULTS: > > > > 2023-12-18 12:09:32,356 - oe-selftest - INFO - RESULTS - > > > > reproducible.ReproducibleTests.test_reproducible_builds: PASSED > > > > (237.60s) > > > > 2023-12-18 12:09:32,361 - oe-selftest - INFO - SUMMARY: > > > > 2023-12-18 12:09:32,362 - oe-selftest - INFO - oe-selftest () - Ran 1 > > > > test in 241.336s > > > > 2023-12-18 12:09:32,362 - oe-selftest - INFO - oe-selftest - OK - All > > > > required tests passed (successes=1, skipped=0, failures=0, errors=0) > > > > > > > > > > > > Looking harder I don't see oe-seftest ever creating > > > > reproducibleA/reproducibleB directories. > > > > I have these set > > > > OEQA_REPRODUCIBLE_TEST_PACKAGE = "ipk" > > > > OEQA_REPRODUCIBLE_TEST_TARGET = "xr-u-boot" > > > > > > > > I am missing something? > > > > > > > > Jocke > > > > > > > > > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#192663): https://lists.openembedded.org/g/openembedded-core/message/192663 Mute This Topic: https://lists.openembedded.org/mt/103240689/21656 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
