According to the design of uboot-sign.bbclass and kernel-fitimage.bbclass,
both of them use an UBOOT_LOADADDRESS variable to set the load address of
kernel and u-boot image and use an UBOOT_ENTRYPOINT to set the entry address of
kernel and u-boot image.

However, users may set the different load address of u-boot
and kernel image. Therefore, adds UBOOT_FIT_UBOOT_LOADADDRESS
and UBOOT_FIT_UBOOT_ENTRYPOINT to set the
load address and entry point of u-boot image, respectively.

The value of UBOOT_FIT_UBOOT_ENTRYPOINT is UBOOT_LOADADDRESS by default.
The value of UBOOT_FIT_UBOOT_ENTRYPOINT is UBOOT_ENTRYPOINT by default.

Signed-off-by: Jamin Lin <[email protected]>
---
 meta/classes-recipe/uboot-sign.bbclass | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/meta/classes-recipe/uboot-sign.bbclass 
b/meta/classes-recipe/uboot-sign.bbclass
index ad04c82378..abde0bc61c 100644
--- a/meta/classes-recipe/uboot-sign.bbclass
+++ b/meta/classes-recipe/uboot-sign.bbclass
@@ -88,6 +88,9 @@ UBOOT_FIT_ADDRESS_CELLS ?= "1"
 # This is only necessary for determining the signing configuration
 KERNEL_PN = "${PREFERRED_PROVIDER_virtual/kernel}"
 
+UBOOT_FIT_UBOOT_LOADADDRESS ?= "${UBOOT_LOADADDRESS}"
+UBOOT_FIT_UBOOT_ENTRYPOINT ?= "${UBOOT_ENTRYPOINT}"
+
 python() {
     # We need u-boot-tools-native if we're creating a U-Boot fitImage
     sign = d.getVar('UBOOT_SIGN_ENABLE') == '1'
@@ -248,8 +251,8 @@ uboot_fitimage_assemble() {
             os = "u-boot";
             arch = "${UBOOT_ARCH}";
             compression = "none";
-            load = <${UBOOT_LOADADDRESS}>;
-            entry = <${UBOOT_ENTRYPOINT}>;
+            load = <${UBOOT_FIT_UBOOT_LOADADDRESS}>;
+            entry = <${UBOOT_FIT_UBOOT_ENTRYPOINT}>;
 EOF
 
        if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
-- 
2.25.1

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#193629): 
https://lists.openembedded.org/g/openembedded-core/message/193629
Mute This Topic: https://lists.openembedded.org/mt/103732073/21656
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub 
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to