I wonder if it should go to docs ml too On Tue, Mar 5, 2024 at 11:46 AM Khem Raj <raj.k...@gmail.com> wrote: > > Thanks for doing this quickly. > > On Tue, Mar 5, 2024 at 11:46 AM Fabio Estevam <feste...@gmail.com> wrote: > > > > Since commit 7a036b1a1ec7 ("bmaptool: now part of Yocto Project") > > 'bmap-tools-native' has been renamed as 'bmaptool-native'. > > > > Adjust the references in the documentation accordingly. > > > > Suggested-by: Khem Raj <raj.k...@gmail.com> > > Signed-off-by: Fabio Estevam <feste...@gmail.com> > > --- > > documentation/dev-manual/bmaptool.rst | 6 +++--- > > documentation/dev-manual/wic.rst | 2 +- > > 2 files changed, 4 insertions(+), 4 deletions(-) > > > > diff --git a/documentation/dev-manual/bmaptool.rst > > b/documentation/dev-manual/bmaptool.rst > > index 9add72cf3b80..3a2a61d8cdfe 100644 > > --- a/documentation/dev-manual/bmaptool.rst > > +++ b/documentation/dev-manual/bmaptool.rst > > @@ -22,7 +22,7 @@ system image files much faster. > > - If you are unable to install the ``bmap-tools`` package, you will > > need to build Bmaptool before using it. Use the following command:: > > > > - $ bitbake bmap-tools-native > > + $ bitbake bmaptool-native > > > > Following, is an example that shows how to flash a Wic image. Realize > > that while this example uses a Wic image, you can use Bmaptool to flash > > @@ -45,13 +45,13 @@ any type of image. Use these steps to flash an image > > using Bmaptool: > > > > - If you have write access to the media, use this command form:: > > > > - $ oe-run-native bmap-tools-native bmaptool copy > > build-directory/tmp/deploy/images/machine/image.wic /dev/sdX > > + $ oe-run-native bmaptool-native bmaptool copy > > build-directory/tmp/deploy/images/machine/image.wic /dev/sdX > > > > - If you do not have write access to the media, set your permissions > > first and then use the same command form:: > > > > $ sudo chmod 666 /dev/sdX > > - $ oe-run-native bmap-tools-native bmaptool copy > > build-directory/tmp/deploy/images/machine/image.wic /dev/sdX > > + $ oe-run-native bmaptool-native bmaptool copy > > build-directory/tmp/deploy/images/machine/image.wic /dev/sdX > > > > For help on the ``bmaptool`` command, use the following command:: > > > > diff --git a/documentation/dev-manual/wic.rst > > b/documentation/dev-manual/wic.rst > > index 312f78c403a2..05e9cb381b31 100644 > > --- a/documentation/dev-manual/wic.rst > > +++ b/documentation/dev-manual/wic.rst > > @@ -503,7 +503,7 @@ Continuing with the example, you can now write the > > image from the > > built your image, and boot from the media. You can write the image by using > > ``bmaptool`` or ``dd``:: > > > > - $ oe-run-native bmap-tools-native bmaptool copy > > mkefidisk-201804191017-sda.direct /dev/sdX > > + $ oe-run-native bmaptool-native bmaptool copy > > mkefidisk-201804191017-sda.direct /dev/sdX > > > > or :: > > > > -- > > 2.34.1 > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#196648): https://lists.openembedded.org/g/openembedded-core/message/196648 Mute This Topic: https://lists.openembedded.org/mt/104752382/21656 Group Owner: openembedded-core+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-