The explanation below does not make sense. There is no dependency between the
mkdir ${sysconfdir}/gnutls command and the following commands, except if it
actually fails. However, that would mean that the /etc directory does not
exist, which seems unlikely.
//Peter
From: [email protected]
<[email protected]> On Behalf Of Yiding Liu (Fujitsu)
via lists.openembedded.org
Sent: den 8 december 2025 02:52
To: Ross Burton <[email protected]>
Cc: [email protected]
Subject: 回复: [OE-core][PATCH] gnutls: fix postinst script for ${PN}-fips for
multilibs
Hi Ross
I will make an example to explain it.
When I use "gnutls-cli --fips140-mode" in multilib environment, it shows
library not found error.
root@qemux86-64:~# gnutls-cli --fips140-mode
library is NOT in FIPS140-2 mode
And it was caused by lacking hmac files.
root@qemux86-64:~# ls /usr/lib64/.*hmac
ls: cannot access '/usr/lib64/.libgnutl*': No such file or directory
The reason is as following:
When '${sysconfdir}/gnutls' was created by 'mkdir' with lib32-gnutls, the
dir will not be created again by 'mkdir' with lib-gnutls, and the subsequent
command will not be executed, so hmac files were missing in lib64 environment.
${bindir}/fipshmac ${libdir}/libgnutls.so.30.*.* >
${libdir}/.libgnutls.so.30.hmac
So append "-p" parameter can avoid this error.
Liu
________________________________
发件人: Ross Burton <[email protected]<mailto:[email protected]>>
发送时间: 2025年12月5日 02:35
收件人: Liu, Yiding/刘 乙丁 <[email protected]<mailto:[email protected]>>
抄送:
[email protected]<mailto:[email protected]>
<[email protected]<mailto:[email protected]>>
主题: Re: [OE-core][PATCH] gnutls: fix postinst script for ${PN}-fips for
multilibs
On 28 Nov 2025, at 06:59, Yiding Liu (Fujitsu) via lists.openembedded.org
<[email protected]<mailto:[email protected]>>
wrote:
>
> When enabling multilibs,the mkdir command will be failed which will cause
> subsequent command not being executed.
> So append "-p" parameter.
>
> Signed-off-by: Liu Yiding
> <[email protected]<mailto:[email protected]>>
> ---
> meta/recipes-support/gnutls/gnutls_3.8.10.bb | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/meta/recipes-support/gnutls/gnutls_3.8.10.bb
> b/meta/recipes-support/gnutls/gnutls_3.8.10.bb
> index 2ef71a1213..56a84f76f0 100644
> --- a/meta/recipes-support/gnutls/gnutls_3.8.10.bb
> +++ b/meta/recipes-support/gnutls/gnutls_3.8.10.bb
> @@ -90,7 +90,7 @@ BBCLASSEXTEND = "native nativesdk"
> pkg_postinst_ontarget:${PN}-fips () {
> if test -x ${bindir}/fipshmac
> then
> - mkdir ${sysconfdir}/gnutls
> + mkdir -p ${sysconfdir}/gnutls
> touch ${sysconfdir}/gnutls/config
> ${bindir}/fipshmac ${libdir}/libgnutls.so.30.*.* >
> ${libdir}/.libgnutls.so.30.hmac
> ${bindir}/fipshmac ${libdir}/libnettle.so.8.* >
> ${libdir}/.libnettle.so.8.hmac
I don’t understand how this happens, as sysconfdir is /etc in all multilib
configurations?
Can you explain what path is the problem here, this appears to be saying that
/etc doesn’t exist on target, which doesn’t seem likely.
Ross
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#227405):
https://lists.openembedded.org/g/openembedded-core/message/227405
Mute This Topic: https://lists.openembedded.org/mt/116681911/21656
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
