On 07/09/2013 03:15 PM, Darren Hart wrote:
An empty asound.conf should work for most cases. The existing asound.conf
uses plug dmix which causes arecord to fail without a special -D device
specification on the command line (as no capture device is defined).
Clear asound.conf for the default case. Any needed changes should be
made in the BSP layers.
Does there need to be any corresponding change for the meta-yocto-bsps?
Sau!
Signed-off-by: Darren Hart <[email protected]>
Cc: Koen Kooi <[email protected]>
---
meta/recipes-bsp/alsa-state/alsa-state/asound.conf | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/meta/recipes-bsp/alsa-state/alsa-state/asound.conf
b/meta/recipes-bsp/alsa-state/alsa-state/asound.conf
index 6be0242..03653cf 100644
--- a/meta/recipes-bsp/alsa-state/alsa-state/asound.conf
+++ b/meta/recipes-bsp/alsa-state/alsa-state/asound.conf
@@ -1,12 +1 @@
-# default dmix configuration
-
-pcm.!default {
- type plug
- slave.pcm "dmix"
-}
-
-ctl.mixer0 {
- type hw
- card 0
-}
-
+# Global alsa-lib configuration
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
