I have a NOR chip that reports a 4k erase size, so in my machine.conf I
entered:
MKUBIFS_ARGS = "-m 1 -e 3968 -c 7040"
UBINIZE_ARGS = "-m 1 -p 4096"
UBI_VOLNAME = "qspi-rootfs"
When I create an image with "ubi" in the IMAGE_FSTYPES, the build runs and
does not report any error, however it did NOT create the ubi filesystem image.
If I change the parameters for a 64k flash using:
MKUBIFS_ARGS = "-m 1 -e 65408 -c 440"
the ubi filesystem is created (both ubifs and ubi files).
Where can I find what went wrong? I'd expect big read error messages telling
me that it failed to create an image for my device, but I cannot find such
message anywhere.
So my questions are:
1) Why is there no error message when image creation fails?
2) Where is the log/output from the mkfs.ubi commands?
2) What could be wrong with my mkubifs parameters?
Mike.
Met vriendelijke groet / kind regards,
Mike Looijmans
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail: [email protected]
Website: www.topic.nl
Please consider the environment before printing this e-mail
Topic zoekt FPGA experts
http://topic.nl/vacatures/word-jij-onze-nieuwe-fpga-expert/
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
