First this is the wrong list. The question should have gone to oe-core devel,
or openembedded-devel lists. (I have CC'd the first)
On 8/21/14, 9:59 PM, [email protected] wrote:
Hi,
I’m trying to write ( and to use ) a recipe which should build a simple .rpm,
which contains the /usr/lib/libaffinity.so and a few header files within
/usr/include/affinity/* subdir.
However, it looks like bitbake is trying / “forcing” me to build a ${PN}-dbg
package….:
I’m doing the following steps:
1. recipe:
“
…
inherit cmake pkgconfig
PACKAGES = "${PN}"
FILES_${PN} = "${libdir}/libaffinity.so /usr/include/affinity/*”
…
“
Just removing '${PN}-dbg' does not inform the system that you do not want debug
information to be generated. There is a set of standard routines, performed
after do_install, that will generate the debug information unless disabled.
To disable the routines you set:
INHIBIT_PACKAGE_DEBUG_SPLIT = '1'
INHIBIT_PACKAGE_STRIP = '1'
There are two settings they can be used separately, but in your case you likely
want both.
INHIBIT_PACKAGE_DEBUG_SPLIT = '1' disables the files in your package from being
split into run-time and debug components.
INHIBIT_PACKAGE_STRIP = '1' disabled the system from attempting to strip the
run-time components of debug information.
--Mark
So, I assume I’ m asking to build only 1 package.
2. During the bitbake processing, as the compilation, build, and installation
are over, the files are copied into the ${D} directory, as expected:
“
michael@localhost image]$ pwd
/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/image
[michael@localhost image]$ cd usr
[michael@localhost usr]$ ls -la
total 16
drwxr-xr-x. 4 michael michael 4096 Aug 21 19:57 .
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
drwxr-xr-x. 2 michael michael 4096 Aug 21 19:57 lib
“
So far, everything as expected in accordance with the Yocto reference.
3. According to the manual reference - "The |do_package| and
|do_packagedata| tasks combine to analyze the files found in the |D|
<http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-D>
directory…”,
I would expect that the package would be build.
However, the attempt to build is failing. with the error:
“…
ERROR: QA Issue: affinityng: Files/directories were installed but not shipped
/usr/src
/usr/lib/.debug
/usr/lib/.debug/libaffinity.so
/usr/src/debug
/usr/src/debug/affinityng
/usr/src/debug/affinityng/0.1-r0
/usr/src/debug/affinityng/0.1-r0/kernel
…
“
4. Following the reference, I checked the PKGD directory, where the files should
be before split….
And I noticed that there is the src directory there, in addition to
directories — include and lib — the only ones I was expecting to see there.
( see log below ) .
“
/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
….
[michael@localhost usr]$ ls -la
total 20
drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 .
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 ..
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 include
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 lib
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 src
[michael@localhost usr]$ pwd
/home/michael/Devlab/poky/build-atmel/tmp/work/cortexa5t2hf-vfp-poky-linux-gnueabi/affinityng/0.1-r0/package/usr
[michael@localhost usr]$ cd src
[michael@localhost src]$ ls -la
total 12
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 .
drwxr-xr-x. 5 michael michael 4096 Aug 21 19:57 ..
drwxr-xr-x. 3 michael michael 4096 Aug 21 19:57 debug
[michael@localhost src]$
“
5. It looks like that as result of package split, the include & lib directories
are used properly to build affinityng package, at least it is shown in
packages-split properly.
But then , the content of the src directory is causing the problem with QA.
6. At the same time, if I ask to build ${PN}-dbg package in addition - both
packages are build, no QA complains, and all src/debug/* are going into the -dbg
package…
I wonder,
- why does the src directory appear within PKGD/usr? ( If there is no such
directory within the ${D} directory...)
- where is the definition for -dbg package is coming from, and is it possible
to disable it?
May be somebody have the answer or suggestion what to check next….
Thanks for a kind attention to the matter.
Have a great day,
Michael.
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
