On Wed, 2014-10-22 at 09:03 +0200, Maciej Borzecki wrote: > On Monday 20 of October 2014 13:45:37 Philip Balister wrote: > > I'm trying to make an sd card using the sdimage-bootpart.wks file. I've > > made an image and dd'ed it to a card. The card has a good vfat > > partition, but the ext4 partition won't mount. Looks like bad > > superblock. I can format the partition manually, so partitions seem OK > > and card works. > > > > Does anyone have any suggestions for debugging this? > In default wks, the vfat partition is /boot, ext4 is /. If I understood you > correctly / fails to mount, is that right? > > I've rebuilt an image with poky rev 8ac8eca2e3bd8c78e2b31ea974930ed0243258a3. > Loading via loopback and mounting partition 2 (/ in this case) works fine. > > Can you post the output this command? > wic create -D -e core-image-minimal sdimage-bootpart >
It seems the problem is in handling a large file system. A new bug has been opened for this: Bug 6863 - Wic fails to create a working image for a large file system https://bugzilla.yoctoproject.org/show_bug.cgi?id=6863 Tom > Ext4 image is built by image.bbclass (Tom, please correct me if I'm wrong on > this). It should be possible to do the loopback/mount thing with the image > file as well. Can you check if you can mount it this way? > -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
