On Wed, Jan 07, 2015 at 10:48:50AM -0500, Bruce Ashfield wrote: > On Wed, Jan 7, 2015 at 5:07 AM, Martin Jansa <martin.ja...@gmail.com> wrote: > > On Tue, Jan 06, 2015 at 11:08:53AM +0000, Burton, Ross wrote: > >> On 6 January 2015 at 08:57, Martin Jansa <martin.ja...@gmail.com> wrote: > >> > >> > 2) do_configure failing: > >> > > >> > ERROR: Function failed: do_configure (log file is located at > >> > /home/jenkins/workspace/luneos-unstable/webos-ports/tmp-glibc/work/mako-webos-linux-gnueabi/linux-lg-mako/3.4.0+gitrAUTOINC+38bdbfe224-r0/temp/log.do_configure.17498) > >> > ERROR: Logfile of failure stored in: > >> > /home/jenkins/workspace/luneos-unstable/webos-ports/tmp-glibc/work/mako-webos-linux-gnueabi/linux-lg-mako/3.4.0+gitrAUTOINC+38bdbfe224-r0/temp/log.do_configure.17498 > >> > Log data follows: > >> > | DEBUG: Executing python function sysroot_cleansstate > >> > | DEBUG: Python function sysroot_cleansstate finished > >> > | DEBUG: Executing shell function do_configure > >> > | NOTE: make oldconfig > >> > | make: *** No rule to make target `oldconfig'. Stop. > >> > | ERROR: oe_runmake failed > >> > | WARNING: exit code 1 from a shell command. > >> > | ERROR: Function failed: do_configure (log file is located at > >> > /home/jenkins/workspace/luneos-unstable/webos-ports/tmp-glibc/work/mako-webos-linux-gnueabi/linux-lg-mako/3.4.0+gitrAUTOINC+38bdbfe224-r0/temp/log.do_configure.17498) > >> > NOTE: recipe linux-lg-mako-3.4.0+gitrAUTOINC+38bdbfe224-r0: task > >> > do_configure: Failed > >> > ERROR: Task 491 > >> > (/home/jenkins/workspace/luneos-unstable/webos-ports/meta-smartphone/meta-lg/recipes-kernel/linux/ > >> > linux-lg-mako_git.bb, do_configure) failed with exit code '1' > >> > > >> > >> I'll Me Too here, often hitting this on rebuilds: > >> > >> DEBUG: Executing shell function do_configure > >> NOTE: make -C /data/poky-master/tmp/sysroots/qemuarm64/usr/src/kernel > >> O=/data/poky-master/tmp/work/qemuarm64-poky-linux/linux-yocto/3.14.24+gitAUTOINC+a227f20eff_902f34d361-r0/linux-qemuarm64-standard-build > >> oldnoconfig > >> make: Entering directory > >> `/data/poky-master/tmp/sysroots/qemuarm64/usr/src/kernel' > >> make: *** No rule to make target `oldnoconfig'. Stop. > >> make: Leaving directory > >> `/data/poky-master/tmp/sysroots/qemuarm64/usr/src/kernel' ERROR: Task 77 > >> (/home/ross/Yocto/poky/meta/recipes-kernel/linux/linux-yocto_3.14.bb, > >> do_configure) failed with exit code '1' > > > > last world build revealed new kind of error: > > > > both qemux86 and qemux86-64 failed like this > > > > ERROR: Function failed: do_kernel_configme (log file is located at > > /home/jenkins/oe/world/shr-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/3.17.6+gitAUTOINC+b81030f9ec_5ff54d8fbf-r0/temp/log.do_kernel_configme.6974) > > ERROR: Logfile of failure stored in: > > /home/jenkins/oe/world/shr-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/3.17.6+gitAUTOINC+b81030f9ec_5ff54d8fbf-r0/temp/log.do_kernel_configme.6974 > > Log data follows: > > | DEBUG: Executing shell function do_kernel_configme > > | NOTE: kernel configme > > | [INFO] Configuring target/machine combo: "standard/qemux86-64" > > | [INFO] collecting configs in .meta/meta-series > > | ERROR: could not sanitize configuration fragments > > | errors are logged in > > /home/jenkins/oe/world/shr-core/tmp-glibc/sysroots/qemux86-64/usr/src/kernel/.meta/cfg/standard/common-pc-64/config.log > > | WARNING: exit code 1 from a shell command. > > | ERROR: Function failed: do_kernel_configme (log file is located at > > /home/jenkins/oe/world/shr-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/3.17.6+gitAUTOINC+b81030f9ec_5ff54d8fbf-r0/temp/log.do_kernel_configme.6974) > > NOTE: recipe linux-yocto-3.17.6+gitAUTOINC+b81030f9ec_5ff54d8fbf-r0: task > > do_kernel_configme: Failed > > I spoke to soon before. Where can I find the config that triggered this ? I > just > built the latest master and my fragments/patches were all properly applied in > the default build:
It's random, the same oe-core revision first built it fine, then it failed, then it again built fine, see: http://www.openembedded.org/wiki/Bitbake_World_Status the successful build isn't there yet, but rebuilding from the same sstate finished kernel fine > ------------------------- > > DEBUG: Executing shell function do_kernel_configme > NOTE: kernel configme > [INFO] Configuring target/machine combo: "standard/qemux86-64" > [INFO] collecting configs in .meta/meta-series > [INFO] Pre-processed cfg file qemux86-64-standard-config-3.17.6 created. > [INFO] processing of raw cfg data completed. > > ******************************************************************************** > Configuration stored in > /home/bruce/oe/build/tmp/work/qemux86_64-poky-linux/linux-yocto/3.17.6+gitAUTOINC+b81030f9ec_5ff54d8fbf-r0/linux-qemux86_64-standard-build/.config > ******************************************************************************** > > To build with this kernel configuration, ensure a suitable toolchain > is in your path for x86_64, note its common command prefix, and do: > > make > O=/home/bruce/oe/build/tmp/work/qemux86_64-poky-linux/linux-yocto/3.17.6+gitAUTOINC+b81030f9ec_5ff54d8fbf-r0/linux-qemux86_64-standard-build > ARCH=x86_64 \ > CROSS_COMPILE=<cross-compile-prefix> > > DEBUG: Shell function do_kernel_configme finished > > ------------------------- > > Bruce > > > > > -- > > Martin 'JaMa' Jansa jabber: martin.ja...@gmail.com > > > > -- > > _______________________________________________ > > Openembedded-core mailing list > > Openembedded-core@lists.openembedded.org > > http://lists.openembedded.org/mailman/listinfo/openembedded-core > > > > > > -- > "Thou shalt not follow the NULL pointer, for chaos and madness await > thee at its end" -- Martin 'JaMa' Jansa jabber: martin.ja...@gmail.com
signature.asc
Description: Digital signature
-- _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core