On Tue, 2015-09-29 at 05:54 +0300, Maxin B. John wrote: > Remove dependencies for test targets. Otherwise, during ptest > execution, "make" tries to rebuild those executables and fails > there. > > [YOCTO #8059] > > Signed-off-by: Maxin B. John <[email protected]> > --- > .../openssl/openssl/ptest_makefile_deps.patch | 248 > +++++++++++++++++++++ > .../recipes-connectivity/openssl/openssl_1.0.2d.bb | 1 + > 2 files changed, 249 insertions(+) > create mode 100644 > meta/recipes-connectivity/openssl/openssl/ptest_makefile_deps.patch
I get the feeling this patch is going to be a bit of a maintenance burden :(. The dependencies there are valid from a build system perspective but obviously problematic given the way we run the tests. Perhaps a sed expression executed against the Makefile at installation time in ptest might be a more maintainable way to do this? The pattern we need to remove dependencies from does look pretty clear, at least just looking at this patch? I'm torn to be honest, the patch is explicit, the sed could be more prone to breakage. How do we handle this in other ptest situations? Cheers, Richard > diff --git > a/meta/recipes-connectivity/openssl/openssl/ptest_makefile_deps.patch > b/meta/recipes-connectivity/openssl/openssl/ptest_makefile_deps.patch > new file mode 100644 > index 0000000..4202e61 > --- /dev/null > +++ b/meta/recipes-connectivity/openssl/openssl/ptest_makefile_deps.patch > @@ -0,0 +1,248 @@ > +Additional Makefile dependencies removal for test targets > + > +Removing the dependency check for test targets as these tests are > +causing a number of failures and "noise" during ptest execution. > + > +Upstream-Status: Inappropriate [config] > + > +Signed-off-by: Maxin B. John <[email protected]> > + > +diff -Naur openssl-1.0.2d-orig/test/Makefile openssl-1.0.2d/test/Makefile > +--- openssl-1.0.2d-orig/test/Makefile 2015-09-28 12:50:41.530022979 > +0300 > ++++ openssl-1.0.2d/test/Makefile 2015-09-28 12:57:45.930717240 +0300 > +@@ -155,67 +155,67 @@ > + ( $(MAKE) $$i && echo "PASS: $$i" ) || echo "FAIL: $$i"; \ > + done) > + > +-test_evp: $(EVPTEST)$(EXE_EXT) evptests.txt > ++test_evp: > + ../util/shlib_wrap.sh ./$(EVPTEST) evptests.txt > + > +-test_evp_extra: $(EVPEXTRATEST)$(EXE_EXT) > ++test_evp_extra: > + ../util/shlib_wrap.sh ./$(EVPEXTRATEST) > + > +-test_des: $(DESTEST)$(EXE_EXT) > ++test_des: > + ../util/shlib_wrap.sh ./$(DESTEST) > + > +-test_idea: $(IDEATEST)$(EXE_EXT) > ++test_idea: > + ../util/shlib_wrap.sh ./$(IDEATEST) > + > +-test_sha: $(SHATEST)$(EXE_EXT) $(SHA1TEST)$(EXE_EXT) > $(SHA256TEST)$(EXE_EXT) $(SHA512TEST)$(EXE_EXT) > ++test_sha: > + ../util/shlib_wrap.sh ./$(SHATEST) > + ../util/shlib_wrap.sh ./$(SHA1TEST) > + ../util/shlib_wrap.sh ./$(SHA256TEST) > + ../util/shlib_wrap.sh ./$(SHA512TEST) > + > +-test_mdc2: $(MDC2TEST)$(EXE_EXT) > ++test_mdc2: > + ../util/shlib_wrap.sh ./$(MDC2TEST) > + > +-test_md5: $(MD5TEST)$(EXE_EXT) > ++test_md5: > + ../util/shlib_wrap.sh ./$(MD5TEST) > + > +-test_md4: $(MD4TEST)$(EXE_EXT) > ++test_md4: > + ../util/shlib_wrap.sh ./$(MD4TEST) > + > +-test_hmac: $(HMACTEST)$(EXE_EXT) > ++test_hmac: > + ../util/shlib_wrap.sh ./$(HMACTEST) > + > +-test_wp: $(WPTEST)$(EXE_EXT) > ++test_wp: > + ../util/shlib_wrap.sh ./$(WPTEST) > + > +-test_md2: $(MD2TEST)$(EXE_EXT) > ++test_md2: > + ../util/shlib_wrap.sh ./$(MD2TEST) > + > +-test_rmd: $(RMDTEST)$(EXE_EXT) > ++test_rmd: > + ../util/shlib_wrap.sh ./$(RMDTEST) > + > +-test_bf: $(BFTEST)$(EXE_EXT) > ++test_bf: > + ../util/shlib_wrap.sh ./$(BFTEST) > + > +-test_cast: $(CASTTEST)$(EXE_EXT) > ++test_cast: > + ../util/shlib_wrap.sh ./$(CASTTEST) > + > +-test_rc2: $(RC2TEST)$(EXE_EXT) > ++test_rc2: > + ../util/shlib_wrap.sh ./$(RC2TEST) > + > +-test_rc4: $(RC4TEST)$(EXE_EXT) > ++test_rc4: > + ../util/shlib_wrap.sh ./$(RC4TEST) > + > +-test_rc5: $(RC5TEST)$(EXE_EXT) > ++test_rc5: > + ../util/shlib_wrap.sh ./$(RC5TEST) > + > +-test_rand: $(RANDTEST)$(EXE_EXT) > ++test_rand: > + ../util/shlib_wrap.sh ./$(RANDTEST) > + > +-test_enc: ../apps/openssl$(EXE_EXT) testenc > ++test_enc: > + @sh ./testenc > + > +-test_x509: ../apps/openssl$(EXE_EXT) tx509 testx509.pem v3-cert1.pem > v3-cert2.pem > ++test_x509: > + echo test normal x509v1 certificate > + sh ./tx509 2>/dev/null > + echo test first x509v3 certificate > +@@ -223,25 +223,25 @@ > + echo test second x509v3 certificate > + sh ./tx509 v3-cert2.pem 2>/dev/null > + > +-test_rsa: ../apps/openssl$(EXE_EXT) trsa testrsa.pem > ++test_rsa: > + @sh ./trsa 2>/dev/null > + ../util/shlib_wrap.sh ./$(RSATEST) > + > +-test_crl: ../apps/openssl$(EXE_EXT) tcrl testcrl.pem > ++test_crl: > + @sh ./tcrl 2>/dev/null > + > +-test_sid: ../apps/openssl$(EXE_EXT) tsid testsid.pem > ++test_sid: > + @sh ./tsid 2>/dev/null > + > +-test_req: ../apps/openssl$(EXE_EXT) treq testreq.pem testreq2.pem > ++test_req: > + @sh ./treq 2>/dev/null > + @sh ./treq testreq2.pem 2>/dev/null > + > +-test_pkcs7: ../apps/openssl$(EXE_EXT) tpkcs7 tpkcs7d testp7.pem pkcs7-1.pem > ++test_pkcs7: > + @sh ./tpkcs7 2>/dev/null > + @sh ./tpkcs7d 2>/dev/null > + > +-test_bn: $(BNTEST)$(EXE_EXT) $(EXPTEST)$(EXE_EXT) bctest > ++test_bn: > + @echo starting big number library test, could take a while... > + @../util/shlib_wrap.sh ./$(BNTEST) >tmp.bntest > + @echo quit >>tmp.bntest > +@@ -250,33 +250,33 @@ > + @echo 'test a^b%c implementations' > + ../util/shlib_wrap.sh ./$(EXPTEST) > + > +-test_ec: $(ECTEST)$(EXE_EXT) > ++test_ec: > + @echo 'test elliptic curves' > + ../util/shlib_wrap.sh ./$(ECTEST) > + > +-test_ecdsa: $(ECDSATEST)$(EXE_EXT) > ++test_ecdsa: > + @echo 'test ecdsa' > + ../util/shlib_wrap.sh ./$(ECDSATEST) > + > +-test_ecdh: $(ECDHTEST)$(EXE_EXT) > ++test_ecdh: > + @echo 'test ecdh' > + ../util/shlib_wrap.sh ./$(ECDHTEST) > + > +-test_verify: ../apps/openssl$(EXE_EXT) > ++test_verify: > + @echo "The following command should have some OK's and some failures" > + @echo "There are definitly a few expired certificates" > + ../util/shlib_wrap.sh ../apps/openssl verify -CApath ../certs/demo > ../certs/demo/*.pem > + > +-test_dh: $(DHTEST)$(EXE_EXT) > ++test_dh: > + @echo "Generate a set of DH parameters" > + ../util/shlib_wrap.sh ./$(DHTEST) > + > +-test_dsa: $(DSATEST)$(EXE_EXT) > ++test_dsa: > + @echo "Generate a set of DSA parameters" > + ../util/shlib_wrap.sh ./$(DSATEST) > + ../util/shlib_wrap.sh ./$(DSATEST) -app2_1 > + > +-test_gen testreq.pem: ../apps/openssl$(EXE_EXT) testgen test.cnf > ++test_gen testreq.pem: > + @echo "Generate and verify a certificate request" > + @sh ./testgen > + > +@@ -288,13 +288,11 @@ > + @cat certCA.ss certU.ss > intP1.ss > + @cat certCA.ss certU.ss certP1.ss > intP2.ss > + > +-test_engine: $(ENGINETEST)$(EXE_EXT) > ++test_engine: > + @echo "Manipulate the ENGINE structures" > + ../util/shlib_wrap.sh ./$(ENGINETEST) > + > +-test_ssl: keyU.ss certU.ss certCA.ss certP1.ss keyP1.ss certP2.ss keyP2.ss \ > +- intP1.ss intP2.ss $(SSLTEST)$(EXE_EXT) testssl testsslproxy \ > +- ../apps/server2.pem serverinfo.pem > ++test_ssl: > + @echo "test SSL protocol" > + @if [ -n "$(FIPSCANLIB)" ]; then \ > + sh ./testfipsssl keyU.ss certU.ss certCA.ss; \ > +@@ -304,7 +302,7 @@ > + @sh ./testsslproxy keyP1.ss certP1.ss intP1.ss > + @sh ./testsslproxy keyP2.ss certP2.ss intP2.ss > + > +-test_ca: ../apps/openssl$(EXE_EXT) testca CAss.cnf Uss.cnf > ++test_ca: > + @if ../util/shlib_wrap.sh ../apps/openssl no-rsa; then \ > + echo "skipping CA.sh test -- requires RSA"; \ > + else \ > +@@ -312,11 +310,11 @@ > + sh ./testca; \ > + fi > + > +-test_aes: #$(AESTEST) > ++test_aes: > + # @echo "test Rijndael" > + # ../util/shlib_wrap.sh ./$(AESTEST) > + > +-test_tsa: ../apps/openssl$(EXE_EXT) testtsa CAtsa.cnf ../util/shlib_wrap.sh > ++test_tsa: > + @if ../util/shlib_wrap.sh ../apps/openssl no-rsa; then \ > + echo "skipping testtsa test -- requires RSA"; \ > + else \ > +@@ -331,7 +329,7 @@ > + @echo "Test JPAKE" > + ../util/shlib_wrap.sh ./$(JPAKETEST) > + > +-test_cms: ../apps/openssl$(EXE_EXT) cms-test.pl smcont.txt > ++test_cms: > + @echo "CMS consistency test" > + $(PERL) cms-test.pl > + > +@@ -339,22 +337,22 @@ > + @echo "Test SRP" > + ../util/shlib_wrap.sh ./srptest > + > +-test_ocsp: ../apps/openssl$(EXE_EXT) tocsp > ++test_ocsp: > + @echo "Test OCSP" > + @sh ./tocsp > + > +-test_v3name: $(V3NAMETEST)$(EXE_EXT) > ++test_v3name: > + @echo "Test X509v3_check_*" > + ../util/shlib_wrap.sh ./$(V3NAMETEST) > + > + test_heartbeat: > + ../util/shlib_wrap.sh ./$(HEARTBEATTEST) > + > +-test_constant_time: $(CONSTTIMETEST)$(EXE_EXT) > ++test_constant_time: > + @echo "Test constant time utilites" > + ../util/shlib_wrap.sh ./$(CONSTTIMETEST) > + > +-test_verify_extra: $(VERIFYEXTRATEST)$(EXE_EXT) > ++test_verify_extra: > + @echo $(START) $@ > + ../util/shlib_wrap.sh ./$(VERIFYEXTRATEST) > + > diff --git a/meta/recipes-connectivity/openssl/openssl_1.0.2d.bb > b/meta/recipes-connectivity/openssl/openssl_1.0.2d.bb > index 32d8dce..fd56841 100644 > --- a/meta/recipes-connectivity/openssl/openssl_1.0.2d.bb > +++ b/meta/recipes-connectivity/openssl/openssl_1.0.2d.bb > @@ -36,6 +36,7 @@ SRC_URI += "file://configure-targets.patch \ > file://run-ptest \ > file://crypto_use_bigint_in_x86-64_perl.patch \ > file://openssl-1.0.2a-x32-asm.patch \ > + file://ptest_makefile_deps.patch \ > " > > SRC_URI[md5sum] = "38dd619b2e77cbac69b99f52a053d25a" > -- > 2.4.0 > -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
