On Sun, 2016-01-17 at 12:42 +1100, Jonathan Liu wrote: > I have issues building a core-image-minimal Raspberry Pi 2 SD image > after this series of patches using openembedded-core master > (b3b679d5be86f73d1a06c7230cb00872f0a407b5) and meta-raspberrypi > master > (0d8e9271855ccb9bc21bdc0743f8e0f6ff0d2d5c). > > > DEBUG: Executing python function set_image_size > > DEBUG: Python function set_image_size finished > > DEBUG: Executing shell function do_image_rpi-sdimg > > > /home/build/git/pi2/build/tmp/work/raspberrypi2-custom-linux > -gnueabi/core-image-minimal/1.0-r0/temp/run.do_image_rpi-sdimg.8349: > line 108: do_image_rpi-sdimg: command not found > > WARNING: > /home/build/git/pi2/build/tmp/work/raspberrypi2-custom-linux > -gnueabi/core-image-minimal/1.0-r0/temp/run.do_image_rpi-sdimg.8349:1 > exit 127 from > > do_image_rpi-sdimg > > ERROR: Function failed: do_image_rpi-sdimg (log file is located at > /home/build/git/pi2/build/tmp/work/raspberrypi2-custom-linux > -gnueabi/core-image-minimal/1.0-r0/temp/log.do_image_rpi-sdimg.8349) > > openembedded-core 38237b7ac53c416f85c4a70a61acafc3404c8b5f - ok > openembedded-core b3b679d5be86f73d1a06c7230cb00872f0a407b5 - fails > > Any ideas?
Try the patch I just sent to the OE-Core list, "Handle image types containing '-' correctly". Looks like image types containing the "-" character would cause problems but I think there is a workaround. Cheers, Richard -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
