On 2016年02月16日 10:00, Rongqing Li wrote:
On 2016年02月15日 18:30, Burton, Ross wrote:
On 15 February 2016 at 07:47, <[email protected]
<mailto:[email protected]>> wrote:
-SERIAL_CONSOLE ?= "115200 ttyS0"
+SERIAL_CONSOLES ?= "115200 ttyS0"
bitbake.conf says:
SERIAL_CONSOLES ??= "${@d.getVar('SERIAL_CONSOLE', True).replace(' ',
';')}"
And the relevant commit introducing _CONSOLES says:
Just define additional serial consoles like so:
SERIAL_CONSOLES="115200;ttyS0 115200;ttyS1 ... 115200;ttySN"
So moving from CONSOLE to CONSOLES is more than just adding an S.
sorry, I am wrong
Anyway, surely the machine should be setting this if required? Why does
systemd-serialgetty think that ttyS0 should be a serial console if the
machine doesn't say so?
This is a issue, like qemux86, ttyS0 and ttyS1 will be used as console,
but ttyS1 is not a true device when execute "runqemu qemux86", and lead
to the blow error.
this is not issue, since it is fixed by
commit 6f2047a0e278d29876451b5af8b8de156db33ed0
Author: Randy Witt <[email protected]>
Date: Mon Sep 28 15:38:23 2015 -0700
runqemu-internal: Make sure two serial ports always exist
Since inittab for qemu images now always tries to start getty on a
second serial device, make sure that device exists.
Otherwise the following message will be spammed:
INIT: Id "S1" respawning too fast: disabled for 5 minutes
[YOCTO #8374]
(From OE-Core rev: 988369afed85281f3ed9b2f3eeb30f5408498bb9)
Signed-off-by: Randy Witt <[email protected]>
Signed-off-by: Richard Purdie <[email protected]>
-Roy
root@qemu0:~# systemctl status serial-getty@ttyS1
● [email protected] - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/[email protected]; enabled;
vendor preset: enabled)
Active: active (running) since Sat 2016-02-06 03:33:26 UTC; 1s ago
Docs: man:agetty(8)
man:systemd-getty-generator(8)
http://0pointer.de/blog/projects/serial-console.html
Main PID: 902 (agetty)
CGroup:
/system.slice/system-serial\x2dgetty.slice/[email protected]
└─902 /sbin/agetty -8 -L --keep-baud ttyS1 115200 xterm
Feb 06 03:33:26 qemu0 systemd[1]: Started Serial Getty on ttyS1.
Feb 06 03:33:26 qemu0 agetty[902]: /dev/ttyS1: not a tty
the below commit sets ttyS1 as console, but runqemu has only ttyS0 device.
commit 2da3fee6b6d9f4dd4c4cb529f4ba393c20aa0f13
Author: Randy Witt <[email protected]>
Date: Thu Aug 20 13:01:25 2015 -0700
qemurunner: Use two serial ports and log console with a thread
qemu can freeze and stop responding if the socket buffer connected
to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial
connection.
This patch solves the potential freeze by adding a thread to
continuously
read the data from the console and log it. So it also will give a
full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use
for the
sole purpose of watching for the sentinel as well as being the
interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen
due to
interleaved text.
Signed-off-by: Randy Witt <[email protected]>
Signed-off-by: Ross Burton <[email protected]>
-Roy
Ross
--
Best Reagrds,
Roy | RongQing Li
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
