If INITRAMFS_IMAGE is set, build an additional fitImage containing the initramfs. Copy the additional fitImage and the source .its file used to create it to DEPLOYDIR. The fitImage containing the initramfs must be built before do_deploy and after do_install to avoid circular dependencies.
UBOOT_RD_LOADADDRESS - Specifies the load address used by u-boot for the initramfs. UBOOT_RD_ENTRYPOINT - Specifies the entry point used by u-boot for the initramfs. Signed-off-by: George McCollister <george.mccollis...@gmail.com> --- meta/classes/kernel-fitimage.bbclass | 275 +++++++++++++++++++++++------------ 1 file changed, 180 insertions(+), 95 deletions(-) diff --git a/meta/classes/kernel-fitimage.bbclass b/meta/classes/kernel-fitimage.bbclass index 298eda2..2c2a642 100644 --- a/meta/classes/kernel-fitimage.bbclass +++ b/meta/classes/kernel-fitimage.bbclass @@ -14,7 +14,7 @@ python __anonymous () { image = d.getVar('INITRAMFS_IMAGE', True) if image: - d.appendVarFlag('do_assemble_fitimage', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete') + d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete') # Verified boot will sign the fitImage and append the public key to # U-boot dtb. We ensure the U-Boot dtb is deployed before assembling @@ -30,8 +30,9 @@ UBOOT_MKIMAGE_DTCOPTS ??= "" # # Emit the fitImage ITS header # +# $1 ... .its filename fitimage_emit_fit_header() { - cat << EOF >> fit-image.its + cat << EOF >> ${1} /dts-v1/; / { @@ -43,32 +44,33 @@ EOF # # Emit the fitImage section bits # -# $1 ... Section bit type: imagestart - image section start +# $1 ... .its filename +# $2 ... Section bit type: imagestart - image section start # confstart - configuration section start # sectend - section end # fitend - fitimage end # fitimage_emit_section_maint() { - case $1 in + case $2 in imagestart) - cat << EOF >> fit-image.its + cat << EOF >> ${1} images { EOF ;; confstart) - cat << EOF >> fit-image.its + cat << EOF >> ${1} configurations { EOF ;; sectend) - cat << EOF >> fit-image.its + cat << EOF >> ${1} }; EOF ;; fitend) - cat << EOF >> fit-image.its + cat << EOF >> ${1} }; EOF ;; @@ -78,9 +80,10 @@ EOF # # Emit the fitImage ITS kernel section # -# $1 ... Image counter -# $2 ... Path to kernel image -# $3 ... Compression type +# $1 ... .its filename +# $2 ... Image counter +# $3 ... Path to kernel image +# $4 ... Compression type fitimage_emit_section_kernel() { kernel_csum="sha1" @@ -88,17 +91,17 @@ fitimage_emit_section_kernel() { ENTRYPOINT=${UBOOT_ENTRYPOINT} if test -n "${UBOOT_ENTRYSYMBOL}"; then ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \ - awk '$3=="${UBOOT_ENTRYSYMBOL}" {print $1}'` + awk '$4=="${UBOOT_ENTRYSYMBOL}" {print $2}'` fi - cat << EOF >> fit-image.its - kernel@${1} { + cat << EOF >> ${1} + kernel@${2} { description = "Linux kernel"; - data = /incbin/("${2}"); + data = /incbin/("${3}"); type = "kernel"; arch = "${UBOOT_ARCH}"; os = "linux"; - compression = "${3}"; + compression = "${4}"; load = <${UBOOT_LOADADDRESS}>; entry = <${ENTRYPOINT}>; hash@1 { @@ -111,16 +114,17 @@ EOF # # Emit the fitImage ITS DTB section # -# $1 ... Image counter -# $2 ... Path to DTB image +# $1 ... .its filename +# $2 ... Image counter +# $3 ... Path to DTB image fitimage_emit_section_dtb() { dtb_csum="sha1" - cat << EOF >> fit-image.its - fdt@${1} { + cat << EOF >> ${1} + fdt@${2} { description = "Flattened Device Tree blob"; - data = /incbin/("${2}"); + data = /incbin/("${3}"); type = "flat_dt"; arch = "${UBOOT_ARCH}"; compression = "none"; @@ -132,10 +136,39 @@ EOF } # +# Emit the fitImage ITS ramdisk section +# +# $1 ... .its filename +# $2 ... Image counter +# $3 ... Path to ramdisk image +fitimage_emit_section_ramdisk() { + + ramdisk_csum="sha1" + + cat << EOF >> ${1} + ramdisk@${2} { + description = "ramdisk image"; + data = /incbin/("${3}"); + type = "ramdisk"; + arch = "${UBOOT_ARCH}"; + os = "linux"; + compression = "none"; + load = <${UBOOT_RD_LOADADDRESS}>; + entry = <${UBOOT_RD_ENTRYPOINT}>; + hash@1 { + algo = "${ramdisk_csum}"; + }; + }; +EOF +} + +# # Emit the fitImage ITS configuration section # -# $1 ... Linux kernel ID -# $2 ... DTB image ID +# $1 ... .its filename +# $2 ... Linux kernel ID +# $3 ... DTB image ID +# $4 ... ramdisk ID fitimage_emit_section_config() { conf_csum="sha1" @@ -144,21 +177,29 @@ fitimage_emit_section_config() { fi # Test if we have any DTBs at all - if [ -z "${2}" ] ; then + if [ -z "${3}" ] ; then conf_desc="Boot Linux kernel" fdt_line="" - else + ramdisk_line="" + elif [ -z "${4}" ]; then conf_desc="Boot Linux kernel with FDT blob" - fdt_line="fdt = \"fdt@${2}\";" + fdt_line="fdt = \"fdt@${3}\";" + ramdisk_line="" + else + # TODO - handle ramdisk without FDT blob + conf_desc="Boot Linux kernel with FDT blob, ramdisk" + fdt_line="fdt = \"fdt@${3}\";" + ramdisk_line="ramdisk = \"ramdisk@${4}\";" fi - kernel_line="kernel = \"kernel@${1}\";" + kernel_line="kernel = \"kernel@${2}\";" - cat << EOF >> fit-image.its + cat << EOF >> ${1} default = "conf@1"; conf@1 { description = "${conf_desc}"; ${kernel_line} ${fdt_line} + ${ramdisk_line} hash@1 { algo = "${conf_csum}"; }; @@ -166,102 +207,131 @@ EOF if [ ! -z "${conf_sign_keyname}" ] ; then - if [ -z "${2}" ] ; then + if [ -z "${3}" ] ; then sign_line="sign-images = \"kernel\";" - else + elif [ -z "${4}" ]; then sign_line="sign-images = \"fdt\", \"kernel\";" + else + sign_line="sign-images = \"ramdisk\", \"fdt\", \"kernel\";" fi - cat << EOF >> fit-image.its + cat << EOF >> ${1} signature@1 { algo = "${conf_csum},rsa2048"; key-name-hint = "${conf_sign_keyname}"; - sign-images = "fdt", "kernel"; + ${sign_line} }; EOF fi - cat << EOF >> fit-image.its + cat << EOF >> ${1} }; EOF } -do_assemble_fitimage() { - if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then - kernelcount=1 - dtbcount="" - rm -f fit-image.its arch/${ARCH}/boot/fitImage - - fitimage_emit_fit_header - - # - # Step 1: Prepare a kernel image section. - # - fitimage_emit_section_maint imagestart - - uboot_prep_kimage - fitimage_emit_section_kernel "${kernelcount}" linux.bin "${linux_comp}" - - # - # Step 2: Prepare a DTB image section - # - if test -n "${KERNEL_DEVICETREE}"; then - dtbcount=1 - for DTB in ${KERNEL_DEVICETREE}; do - if echo ${DTB} | grep -q '/dts/'; then - bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used." - DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'` - fi - DTB_PATH="arch/${ARCH}/boot/dts/${DTB}" - if [ ! -e "${DTB_PATH}" ]; then - DTB_PATH="arch/${ARCH}/boot/${DTB}" - fi - - fitimage_emit_section_dtb ${dtbcount} ${DTB_PATH} - dtbcount=`expr ${dtbcount} + 1` - done - fi +# +# Assemble fitImage +# +# $1 ... .its filename +# $2 ... fitImage name +# $3 ... include ramdisk +fitimage_assemble() { + kernelcount=1 + dtbcount="" + ramdiskcount=${3} + rm -f ${1} arch/${ARCH}/boot/${2} + + fitimage_emit_fit_header ${1} + + # + # Step 1: Prepare a kernel image section. + # + fitimage_emit_section_maint ${1} imagestart + + uboot_prep_kimage + fitimage_emit_section_kernel ${1} "${kernelcount}" linux.bin "${linux_comp}" + + # + # Step 2: Prepare a DTB image section + # + if test -n "${KERNEL_DEVICETREE}"; then + dtbcount=1 + for DTB in ${KERNEL_DEVICETREE}; do + if echo ${DTB} | grep -q '/dts/'; then + bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used." + DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'` + fi + DTB_PATH="arch/${ARCH}/boot/dts/${DTB}" + if [ ! -e "${DTB_PATH}" ]; then + DTB_PATH="arch/${ARCH}/boot/${DTB}" + fi + + fitimage_emit_section_dtb ${1} ${dtbcount} ${DTB_PATH} + dtbcount=`expr ${dtbcount} + 1` + done + fi - fitimage_emit_section_maint sectend + # + # Step 3: Prepare a ramdisk section. + # + if [ "x${ramdiskcount}" = "x1" ] ; then + copy_initramfs + fitimage_emit_section_ramdisk ${1} "${ramdiskcount}" ${B}/usr/${INITRAMFS_IMAGE}-${MACHINE}.cpio + fi - # Force the first Kernel and DTB in the default config - kernelcount=1 - dtbcount=1 + fitimage_emit_section_maint ${1} sectend + + # Force the first Kernel and DTB in the default config + kernelcount=1 + dtbcount=1 - # - # Step 3: Prepare a configurations section - # - fitimage_emit_section_maint confstart + # + # Step 4: Prepare a configurations section + # + fitimage_emit_section_maint ${1} confstart - fitimage_emit_section_config ${kernelcount} ${dtbcount} + fitimage_emit_section_config ${1} ${kernelcount} ${dtbcount} ${ramdiskcount} - fitimage_emit_section_maint sectend + fitimage_emit_section_maint ${1} sectend - fitimage_emit_section_maint fitend + fitimage_emit_section_maint ${1} fitend - # - # Step 4: Assemble the image - # + # + # Step 5: Assemble the image + # + uboot-mkimage \ + ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ + -f ${1} \ + arch/${ARCH}/boot/${2} + + # + # Step 6: Sign the image and add public key to U-Boot dtb + # + if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then uboot-mkimage \ ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ - -f fit-image.its \ - arch/${ARCH}/boot/fitImage - - # - # Step 5: Sign the image and add public key to U-Boot dtb - # - if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then - uboot-mkimage \ - ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ - -F -k "${UBOOT_SIGN_KEYDIR}" \ - -K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}" \ - -r arch/${ARCH}/boot/fitImage - fi + -F -k "${UBOOT_SIGN_KEYDIR}" \ + -K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}" \ + -r arch/${ARCH}/boot/${2} + fi +} + +do_assemble_fitimage() { + if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then + fitimage_assemble fit-image.its fitImage fi } addtask assemble_fitimage before do_install after do_compile +do_assemble_fitimage_initramfs() { + if test "x${KERNEL_IMAGETYPE}" = "xfitImage" -a -n "${INITRAMFS_IMAGE}" ; then + fitimage_assemble fit-image-${INITRAMFS_IMAGE}.its fitImage-${INITRAMFS_IMAGE} 1 + fi +} + +addtask assemble_fitimage_initramfs before do_deploy after do_install + kernel_do_deploy[vardepsexclude] = "DATETIME" kernel_do_deploy_append() { # Update deploy directory @@ -275,8 +345,23 @@ kernel_do_deploy_append() { linux_bin_symlink_name=${KERNEL_IMAGETYPE}-linux.bin-${MACHINE} install -m 0644 linux.bin ${DEPLOYDIR}/${linux_bin_base_name}.bin + if [ -n "${INITRAMFS_IMAGE}" ]; then + echo "Copying fit-image-${INITRAMFS_IMAGE}.its source file..." + its_initramfs_base_name="${KERNEL_IMAGETYPE}-its-${INITRAMFS_IMAGE}-${PV}-${PR}-${MACHINE}-${DATETIME}" + its_initramfs_symlink_name=${KERNEL_IMAGETYPE}-its-${INITRAMFS_IMAGE}-${MACHINE} + install -m 0644 fit-image-${INITRAMFS_IMAGE}.its ${DEPLOYDIR}/${its_initramfs_base_name}.its + fit_initramfs_base_name="${KERNEL_IMAGETYPE}-${INITRAMFS_IMAGE}-${PV}-${PR}-${MACHINE}-${DATETIME}" + fit_initramfs_symlink_name=${KERNEL_IMAGETYPE}-${INITRAMFS_IMAGE}-${MACHINE} + install -m 0644 arch/${ARCH}/boot/fitImage-${INITRAMFS_IMAGE} ${DEPLOYDIR}/${fit_initramfs_base_name}.bin + fi + cd ${DEPLOYDIR} ln -sf ${its_base_name}.its ${its_symlink_name}.its ln -sf ${linux_bin_base_name}.bin ${linux_bin_symlink_name}.bin + + if [ -n "${INITRAMFS_IMAGE}" ]; then + ln -sf ${its_initramfs_base_name}.its ${its_initramfs_symlink_name}.its + ln -sf ${fit_initramfs_base_name}.bin ${fit_initramfs_symlink_name}.bin + fi fi } -- 2.8.0 -- _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core