On 16-08-05 17:11:34, Robert P. J. Day wrote: > On Fri, 5 Aug 2016, Khem Raj wrote: > > > > > > On Aug 5, 2016, at 11:52 AM, Robert P. J. Day <[email protected]> > > > wrote: > > > > > > > > > i'm in the situation where i want to add the u-boot-fw-utils package > > > to my image, but the corresponding u-boot source for the target is not > > > part of the BSP layer; in fact, it's not part of a layer at all (built > > > manually elsewhere), so it's unsurprising that, if i add that recipe > > > to the image, i get: > > > > > > ERROR: u-boot-fw-utils was skipped: Either UBOOT_MACHINE or > > > UBOOT_CONFIG must be set in the ... machine configuration. > > > ERROR: u-boot-fw-utils was skipped: Either UBOOT_MACHINE or > > > UBOOT_CONFIG must be set in the ... machine configuration. > > > > > > is there a short doc that explains what i minimally need to supply to > > > build that package? i've never been in the situation where u-boot > > > wasn't part of the BSP. > > > > perhaps you need to set UBOOT_MACHINE = "config" > > i apologize, but i have no idea what that means. does that mean i > want to build that package, and it will consult /etc/fw_env.config > when the executables are run?
well, the errors you reported above are issued when OE is trying to build the u-boot-fw-utils recipe and BSP does not define the UBOOT_MACHINE, I was merely pointing to a possible solution. I do not know your usecase. -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
