> > It seems that qemu is aborting while running localedef. Unless you > really need locales I would recommend to disable > the locale generation. Add > ENABLE_BINARY_LOCALE_GENERATION = "0" > to your local.conf and rebuild eglibc. > > -Khem >
hi, i have some progress to report. The build completed and generated a vmlinux image and a file-system tarball. I created a ramdisk (initrd) and tried to boot the kernel on my cortex A9 hardware. I notice that the kernel boots till the point where it frees init memory, after which it hangs. Here is a short kernel boot log - ------------------8<8<8<8<8<8<----------------------- io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) i2c /dev entries driver Serial: AMBA PL011 UART driver uart0_bus: ttyAMA0 at MMIO 0x80120000 mem 0xc8812000 (irq = 43) is a AMBA/PL011 uart1_bus: ttyAMA1 at MMIO 0x80121000 mem 0xc8814000 (irq = 51) is a AMBA/PL011 uart2_bus: ttyAMA2 at MMIO 0x80007000 mem 0xc8816000 (irq = 58) is a AMBA/PL011 console [ttyAMA2] enabled brd: module loaded mice: PS/2 mouse device common for all mice RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing init memory: 92K ø¾€ÿ ------------------------8<8<8<8<8<------------------- If i pass a statically linked hello application to init (init=hello), it works. My toolchain lineup remains same, as published in my previous mail. Is eglibc somehow messed up ? Any pointers ? Thanks --RK _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
