2010/1/31 Guo Hongruan <[email protected]>: > Hi guys, > I tried to build openembedded with the following configuration: > MACHINE=openrd-base > DISTRO=micro > LIBC=glibc > But when building linux kernel ( linux-kirkwood_2.6.33-rc5.bb ), there are > some patches failed to be applied and bitbake raised some exceptions with > unknow reason. The attachment is the raw error information captured from the > screen. Hope it is useful. > > Thanks a lot! > Thanks again for the report.
I have investigated the issue. There are only two patches for openrd-base and this one: openrd-base-enable-pcie.patch was already added to the git so it was not needed any more. However this patch only patches arch/arm/mach-kirkwood/openrd_base-setup.c so it is not responsible for all the fails you got when patching. I have removed the pci patch from the recipe. The other patch did also not apply any more as there was a part for openrd_client-setup.c, which did not apply. As the client part is not interesting for openrd-base, I've removed the client part from the patch. I am building as I write this. Can't test as I do not have a base board.(I have a sheeva and an openrd client, so can test on just those two; will definitely make sure to compile openrd base too if I change things (and if someone (Marvell? eInfoChips?) wants to donate a base board for testing feel free to email me :-) ) Anyway, the kernel is compiling for base; I don't expect any problems; will rebuild for sheeva and openrd-client as well and then commit (or report back here). Expect it to be on the feed in an hour or two. Frans. _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
