Marcin Juszkiewicz skrev:
Dnia wtorek, 9 marca 2010 o 23:25:22 Ulf Samuelsson napisał(a):
I have built a custom variant of x11-gpe-image for the SAM9M10.
Which machine in OE covers that board? I have to admit that I did not tried to
hack mine.
I am building the SAM9G45EK, but I am using a 2.6.30 kernel
patched with maxim.org.za + www.linux4sam.org .exp3 patches
instead of the 2.6.32 currently in openembedded.
Also updated bootstrap and u-boot, but that won't affect this.
When gpe is started, the Y direction seems to be compressed.
When I start the calculator and press at the top of the screen,
the calculator buttons 5 mm below gets pressed.
When I press at the bottom of the screen, the buttons 5 mm above
gets pressed.
Changing /etc/pointercal manually seems to have no effect
It's like pointercal gets ignored.
When others run the same kernel with minor config changes
using the stable branch ans xserver-kdrive, this phenomena
does not happen.
Check do you have kdrive or xorg with evdev or tslib driver.
I will check, when I am back home.
Will also send the patches I added.
Regards,
BR
/Ulf
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
