Hi All, I am jumping across to this email list as the user one has very little traffic.
I have just found OE and would like to use it to get Linux up and running on some custom hardware. The hardware is currently running the logicloader bootloader from LogicPD and a YAFFS2 filesystem. I have found very little info on the steps necessary to port to new hardware. As far as OE is concerned, I have built an image after altering the MACHINE and DISTRO to something close to what I need. I now have a zimage (kernel) and a rootFS. However I have a number of questions: 1. To boot with zimage with logicloader, I have to load the image into memory at an address, and then execute it at the start code which I presume is an offset the start of the image. Can anyone tell me how I can find the relevant map file to work out what offset I need to apply? I did a search for *.map files in the build/tmp direcory and found nada .. 2. How do I do a kernel config? Is there an option to pass to bitbake to do that, or do I have to find the kernel source and do it manually, then rebuild with bitbake? 3. What src files in the kernel do I need to to maybe alter to get the serial port and memory map right for my target hardware .. 4. Once I get the kernel booting, I need it to load the rootfs, initially I can boot that from NFS, but I would like to eventually load it from my YAFFS NAND partition, how do I do that? Hope someone can give me some pointers in the right direction ... I would love to kick off WinCE from this hardware ;-) Cheers, Bernie -- You always have believers and scepticts.. A True inventor is always a believer.. _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
