-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 18-05-10 10:10, Christophe Aeschlimann wrote: > Le 18.05.2010 09:30, Koen Kooi a écrit : > On 18-05-10 09:27, Christophe Aeschlimann wrote: >>>> Hi, >>>> >>>> We are at least three hawkboard owners that have the same issue. >>>> >>>> Building org.openembedded.dev HEAD with >>>> >>>> MACHINE= "hawkboard" >>>> DISTRO = "angstrom-2008.1" >>>> >>>> produces a Kernel Image that cannot be booted on our hawkboards. >>>> >>>> The behaviour is the following with the following kernel bootargs : >>>> >>>> console=ttyS2,115200n8 root=/dev/nfs >>>> nfsroot=172.16.147.10:/srv/nfs/hawkboard ip=172.16.100.100 >>>> eth=0a:c1:a8:12:fa:c0 >>>> >>>>> U-Boot 2009.01-dirty (Nov 26 2009 - 02:15:00) > > Try the OE built u-boot. > >> Hi Koen, > >> I haven't been able to boot using the OE generated u-boot so far. > >> But I'm a bit confused about how everything is working together. > >> Don't you have to generate an AIS image using AISGen and the OE >> generated u-boot image before flashing it in the UBL partition >> (beginning of the second erase block) ?
Not that I know of. I flashed uboot using tftp and that seemed to work fine. That was on a prototype hawkboard which has released it magic smoke since then. regards, Koen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iD8DBQFL8nYpMkyGM64RGpERAqugAJ99oUDfVGTJAbIs8AQwR1HA/9iTdwCffwgQ B6yfaXpEm0axylpQQu6q5v0= =H6Ac -----END PGP SIGNATURE----- _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
