2010/7/14 Adrian Alonso <aalons...@gmail.com> > * New config machine, generic support for Xilinx > Virtex4 platforms ml401, ml403, ml405, ml410 > * Tested on ml405 target board, powerpc based ref > design at http://github.com/aalonso/xilinx-ml405 > * Target configuration handled in xilinx-bsp.bbclass > > Signed-off-by: Adrian Alonso <aalons...@gmail.com> > --- > conf/machine/xilinx-virtex4.conf | 37 > +++++++++++++++++++++++++++++++++++++ > 1 files changed, 37 insertions(+), 0 deletions(-) > create mode 100644 conf/machine/xilinx-virtex4.conf > > diff --git a/conf/machine/xilinx-virtex4.conf > b/conf/machine/xilinx-virtex4.conf > new file mode 100644 > index 0000000..eeea44e > --- /dev/null > +++ b/conf/machine/xilinx-virtex4.conf > @@ -0,0 +1,37 @@ > +# Copyright (C) 2010, Adrian Alonso <aalons...@gmail.com> > +# Released under the MIT license (see packages/COPYING) > +...@type: Machine > +...@name: Xilinx Virtex4 FPGA Development Platform > +...@description: Machine configuration for Xilinx Virtex4 family > +# Supported targets > +# ML403, ML405, ML410 > + > +TARGET_ARCH = "powerpc" > +TARGET_CPU = "405" > +TARGET_FPU = "soft" > +#tune for the selected cpu > +require conf/machine/include/tune-ppc405.inc > + > +PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx" > +PREFERRED_VERSION_u-boot_xilinx-virtex4 = "u-boot-xilinx" > + > +KERNEL_IMAGETYPE = "uImage" > + > +MACHINE_FEATURES = "kernel26 apm ext2 vfat ethernet" > +MACHINE_EXTRA_RECOMMENDS = "kernel-modules" > + > +UBOOT_ENTRYPOINT ?= "0x00000000" > +UBOOT_LOADADDRESS ?= "0x00000000" > + > +# Xilinx EDK override hardware definitions for xilinx-bsp > +# Include in your local.conf > +# XILINX_BSP_PATH = "complete path for Xilinx XPS project" > +# XILINX_BOARD = "ml410" > + > +# Don't use tty1 > +USE_VT = "0" > +SERIAL_CONSOLE = "9600 ttyS0" > + > +# Device nodes add xsa for (system ace) > +IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \ > + files/device_table_add-xsa.txt" >
I think these are normally not put in machine files. (at least I normally put them in my image recipe's not in the machine file). -- > 1.7.1.1 > > > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
