* New config machine, generic support for Xilinx Virtex4 platforms ml401, ml403, ml405, ml410 * Tested on ml405 target board, powerpc based ref project design at http://github.com/aalonso/xilinx-ml405 * Target configuration handled in xilinx-bsp.bbclass * v2 more descriptive subject
Signed-off-by: Adrian Alonso <aalons...@gmail.com> --- conf/machine/xilinx-virtex4.conf | 37 +++++++++++++++++++++++++++++++++++++ 1 files changed, 37 insertions(+), 0 deletions(-) create mode 100644 conf/machine/xilinx-virtex4.conf diff --git a/conf/machine/xilinx-virtex4.conf b/conf/machine/xilinx-virtex4.conf new file mode 100644 index 0000000..eeea44e --- /dev/null +++ b/conf/machine/xilinx-virtex4.conf @@ -0,0 +1,37 @@ +# Copyright (C) 2010, Adrian Alonso <aalons...@gmail.com> +# Released under the MIT license (see packages/COPYING) +...@type: Machine +...@name: Xilinx Virtex4 FPGA Development Platform +...@description: Machine configuration for Xilinx Virtex4 family +# Supported targets +# ML403, ML405, ML410 + +TARGET_ARCH = "powerpc" +TARGET_CPU = "405" +TARGET_FPU = "soft" +#tune for the selected cpu +require conf/machine/include/tune-ppc405.inc + +PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx" +PREFERRED_VERSION_u-boot_xilinx-virtex4 = "u-boot-xilinx" + +KERNEL_IMAGETYPE = "uImage" + +MACHINE_FEATURES = "kernel26 apm ext2 vfat ethernet" +MACHINE_EXTRA_RECOMMENDS = "kernel-modules" + +UBOOT_ENTRYPOINT ?= "0x00000000" +UBOOT_LOADADDRESS ?= "0x00000000" + +# Xilinx EDK override hardware definitions for xilinx-bsp +# Include in your local.conf +# XILINX_BSP_PATH = "complete path for Xilinx XPS project" +# XILINX_BOARD = "ml410" + +# Don't use tty1 +USE_VT = "0" +SERIAL_CONSOLE = "9600 ttyS0" + +# Device nodes add xsa for (system ace) +IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \ + files/device_table_add-xsa.txt" -- 1.7.2 _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
