On 08/20/2010 01:55 AM, Dimitris Papastamos wrote:
Hello,
I've built the standard console-image for the SMDK6410 platform using
the configuration provided by oe. The problem is that when I boot the
image over the network, and then mount the rootfs over nfs, the system
hangs before even entering runlevel 5. If I chmod -x udev udev-cache in
the init scripts then I can get a usable system which I can ssh into.
I've also tried to use a snapshot from Linus's git however the same
problem appeared.
Look in /etc/network/interfaces (I think, not at a desk where I can
check) and comment out the line auto eth0. I think the bootscripts take
the interface down and up and that is bad if you are using root over nfs.
Philip
I am using the latest snapshot of oe as of now and bitbake 1.8.18. The
version of udev appears to be 151. My target distro is angstrom-2008.1.
I've also tried to build a base-image and a bootstrap-image and I had
the same problem.
I've attached my oe kernel configuration, my oe local.conf as well as
the boot process log.
Thanks,
Dimitrios
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
