On Thu, Sep 2, 2010 at 4:36 AM, Graham Gower <[email protected]> wrote: > On 2 September 2010 17:30, J. L. <[email protected]> wrote: >> When it was going through the final stages in my build I ended up with >> some conflict errors and not sure if I understand how to fix this >> properly. Do I just remove what its says is why it cant install one >> file because another is trying to install the same file ? Or? But I >> dont think I am understanding these correctly as I have never gotten >> them before. I would really appreciate any help on this one so I can >> get my image packaged now that everything is built. Also I can post my >> image I am trying to build if that helps its a very bloated desktop >> image, here is the error: >> >> also I tried to clean it by doing bitbake -c clean and then bitbake >> myimage but still same result. >> >> | Collected errors: >> | * check_data_file_clashes: Package kernel-firmware-down3 wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/lib/firmware/edgeport/down3.bin >> | But that file is already provided by package * linux-firmware > > These two packages cannot be installed on the same system. There are > two possibilities for fixing this: either don't included both packages > in the same image or remove the file from one of the packages. >> | * opkg_install_cmd: Cannot install package task-base-extended. > > For whatever reason, the task-base-extended ipk cannot be found in > your package repository. There are many reasons why this may occur and > I will not speculate upon it. > >> | * check_data_file_clashes: Package rt73-firmware wants to install >> file /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/lib/firmware/rt73.bin >> | But that file is already provided by package * linux-firmware >> | * opkg_install_cmd: Cannot install package rt73-firmware. >> | * opkg_install_cmd: Cannot install package libnet. >> | * check_data_file_clashes: Package glproto-dev wants to install >> file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/include/GL/internal/glcore.h >> | But that file is already provided by package * libgl-dev >> | * opkg_install_cmd: Cannot install package artoolkit-dev. >> | * satisfy_dependencies_for: Cannot satisfy the following >> dependencies for task-sdk-native: >> | * libdbd-sqlite-perl * libdbix-simple-perl * > > The libdbd-sqlite-perl and libdbix-simple-perl ipks cannot be found in > your repository. > >> | * opkg_install_cmd: Cannot install package task-native-sdk. >> | * check_data_file_clashes: Package python-zopeinterface wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/lib/python2.6/site-packages/setuptools.pth >> | But that file is already provided by package * python-setuptools >> | * check_data_file_clashes: Package python-zopeinterface wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/lib/python2.6/site-packages/site.pyo >> | But that file is already provided by package * python-setuptools >> | * check_data_file_clashes: Package python-zopeinterface wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/lib/python2.6/site-packages/site.py >> | But that file is already provided by package * python-setuptools >> | * check_data_file_clashes: Package python-zopeinterface wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/bin/easy_install-2.6 >> | But that file is already provided by package * python-setuptools >> | * check_data_file_clashes: Package python-zopeinterface wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/bin/easy_install >> | But that file is already provided by package * python-setuptools >> | * opkg_install_cmd: Cannot install package python-twisted. >> | * opkg_install_cmd: Cannot install package gst-plugin-video4linux2. >> | * resolve_conffiles: Existing conffile >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/etc/device_table is >> different from the conffile in the new package. The new conffile will >> be placed at >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/etc/device_table-opkg. > > Two packages both provide the same config file. This should really > error out, but its only a warning at the moment because it would cause > too many breakages (the message printing is deferred until the end of > opkg's processing, like an error). > >> | * check_data_file_clashes: Package gpe-theme-clearlooks wants to >> install file >> /home/vdubhack/overo-oe/tmp/rootfs/UAV-Dimage/usr/share/themes/Clearlooks/gtk-2.0/gtkrc >> | But that file is already provided by package * gtk-theme-clearlooks >> | * opkg_install_cmd: Cannot install package gpe-session-scripts. >> NOTE: Task failed: >> /home/vdubhack/overo-oe/tmp/work/overo-angstrom-linux-gnueabi/UAV-Dimage-1.0-r0/temp/log.do_rootfs.4216 >> NOTE: oestats: task failed, see >> http://tinderbox.openembedded.net/public/logs/task/7541484.txt >> ERROR: TaskFailed event exception, aborting >> ERROR: Build of >> /home/vdubhack/overo-oe/user.collection/recipes/images/UAV-Dimage.bb >> do_rootfs failed >> ERROR: Task 11 >> (/home/vdubhack/overo-oe/user.collection/recipes/images/UAV-Dimage.bb, >> do_rootfs) failed >> NOTE: Tasks Summary: Attempted 11557 tasks of which 11540 didn't need >> to be rerun and 1 failed. >> ERROR: '/home/vdubhack/overo-oe/user.collection/recipes/images/UAV-Dimage.bb' >> failed >> NOTE: oestats: build failed, see >> http://tinderbox.openembedded.net/builds/85611/ >> >> >> Thanks as always ! >> >> _______________________________________________ >> Openembedded-devel mailing list >> [email protected] >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel >> > > I suggest you start with a much smaller image and add to it > incrementally. That way, if/when you encounter problems, it is much > easier to narrow down which recipe or recipe dependency is causing > problems. Building a dependency graph with bitbake -g may help narrow > down some problems. > > -Graham > > PS: I appreciate that opkg error messages can be a little cryptic. > Patches welcome! > > _______________________________________________ > Openembedded-devel mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel >
Thanks for the more clear break down I am sorting through everything now and getting a little further. I will soon start working towards learning the patching and recipe procedures. If I run into anymore issues I will post back on this thread _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
