Hi,
i make a console-image and this does not boot. The kernel hangs after
"done, booting the kernel.". Then i enabled CONFIG_DEBUG_LL and see,
that the machine ID does not match:
Automatic boot of image at addr 0x87000000 ...
## Booting kernel from Legacy Image at 87000000 ...
Image Name: Angstrom/2.6.31+2.6.32-rc2-r49+g
Created: 2010-12-03 11:43:29 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2004176 Bytes = 1.9 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing
Linux.....................................................................................................................................
done, booting the kernel.
Error: unrecognized/unsupported machine ID (r1 = 0x0000085a).
Available machine support:
ID (hex) NAME
e2855034
Please check your kernel config and/or bootloader.
MACH_DM355_LEOPARD, and ARCH_DAVINCI and ARCH_DAVINCI_DM355 are set to yes.
What can i do?
Thanks,
Klaus
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
