On Thu, Jan 20, 2011 at 07:04:05PM +0300, Yury Bushmelev wrote: > 2011/1/20 Víctor M. Jáquez L. <[email protected]>: > > I'm trying to build a native-sdk-image for pandaboard, both with > > angstrom-linux-gnueabi and external csl toolchains. Both builds failed in > > the > > same point: > > > > | Configuring sysvinit. > > | Collected errors: > > | * satisfy_dependencies_for: Cannot satisfy the following dependencies > > for task-sdk-native: > > | * virtual-libc-dev * > > | * opkg_install_cmd: Cannot install package task-sdk-native. > > | * resolve_conffiles: Existing conffile > > /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table > > is different from the conffile in the new package. The new conffile will > > be placed at > > /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table-opkg. > > | ERROR: Function do_rootfs failed > > > > I don't know how to deal with this issue. Any advice? > > I have built native-sdk-image twice (for qemuarm and for qemux86) this > week w/o problems, but for minimal distro.
I'm trying to build an image for the pandaboard but I faced this same issue: http://comments.gmane.org/gmane.comp.handhelds.openembedded/4065 (the linux-omap4 kernel compilation broke because of "Error: selected processor does not support ARM mode `smc #0'") So I moved back the binutils version to 2.20.1 vmjl _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
