Hi,
Perhaps a dumb question, but - should the recipe for x11-gpe-image be updated then? I ask because it's what set up tslib (rather than xinput-calibrator), and then evdev. Thanks! ... Russell On Fri, Feb 11, 2011 06:16 PM, Khem Raj <[email protected]> wrote: > On (01/02/11 14:37), [email protected] wrote: > > Hi, > > > > I have successfully build and then run several OE images on my target > > hardware (h1940) - and have noticed an interesting oddity (bug?). > > > > If I run the opie-image for example, everything works just great. However, > > if I run an X-based image (like, say x11-gpe-image) when the GUI starts up > > tslib calibration is run ... but then basically thrown away, as the driver > > for the touchscreen is set to evdev by default (and the touchscreen isn't > > calibrated / does not work right). If I manually build and install > > xf86-input-tslib, and then configure the input as tslib (not evdev) - once > > I restart gpe-dm it works as expected! > > are you using X11 with evdev driver then tslib will not be used at all. You > have to use xinput-calibrator. > > > > Is this supposed to be the case, or perhaps something not configured quite > > right in the builds? > > > > Thanks! > > > > ... Russell > > > > > > _______________________________________________ > > Openembedded-devel mailing list > > [email protected] > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > > _______________________________________________ > Openembedded-users mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users > _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
