Hi, Am 03.05.2011 13:15, schrieb Koen Kooi: > First you have to fix the included rxtx install: > http://dominion.thruhere.net/koen/cms/making-processing-arduino-ide-replicaorg-work-on-arm Yep, same story as on an amd64 machine. :)
>> Could you upload programs to the >> arduino and receive stuff through the serial port? > > That works, and if you download and untar: > > http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-binutils-2.21.tar.bz2 > http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-gcc-4.5.2.tar.bz2 > http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-libc-1.7.1.tar.bz2 How did you build those? Directly on a BB using gcc? I looked into making recipes for OE for this but my toolchain-foo is way to small for this. > You can even compile the included examples. I succesfully compiled and > uploaded the serial test app to the > http://elinux.org/BeagleBoard_Trainer expansionboard attached to my xM. > I haven't tried using it on a proper arduino board yet, but that uses > the same bootloader as the trainer. Great! Then I think this is going to work without problems! Thanks for trying this out. So I am going to take a BB/PB to LinuxTag along with an arduino starterkit ... :) Regards, Robert _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
