Dear Andreas, dear Eyal,
On Mi, 2011-05-25 at 15:36 +0200, Andreas Oberritter wrote:
> On 05/25/2011 02:58 PM, Eyal Reizer wrote:
[…]
> > +SRCREV = "b8fb017272ed4794339978c9fbc0e74571a44728"
> > +PR = "r0"
>
> PR = "r0" is the default and can be removed.
it seems there are different opinions on this topic. At least the manual
says differently.
Note
It is good practice to always define PR in your recipes, even
for the "r0" release, so that when editing the recipe it is
clear that the PR number needs to be updated.
You should always increment PR when modifying a recipe.
Sometimes this can be avoided if the change will have no effect
on the actual packages generated by the recipe, such as updating
the SRC_URI to point to a new host. If in any doubt then you
should increase the PR regardless of what has been changed.
The PR value should never be decremented. If you accidentally
submit a large PR value for example then it should be left at
the value and just increased for new releases, not reset back to
a lower version.
> > +PV = "0.7.3+0.8.0-rc"
> > +PR_append = "+gitr${SRCPV}"
>
> SRCPV should not be used in PR (even if it's been copied from another
> recipe which does it wrong).
I am still confused about this one. That is why I still have not
committed the pkg-config patch yet [2]. Could the right way be
documented in the manual.
[…]
Thanks,
Paul
[1] http://docs.openembedded.org/usermanual/usermanual.html#recipes_versioning
[2] http://patches.openembedded.org/patch/2711/
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
