On Thu, Jul 7, 2011 at 11:12 AM, Mark A. Yoder <[email protected]> wrote: > I'm try to get QT installed via bitbake. I'm following the instructions at > [1] with a slight variation: > $ git clone git://git.angstrom-distribution.org/setup-scripts oe > $ cd oe > $ MACHINE=beagleboard ./oebb.sh config beagleboard > $ MACHINE=beagleboard ./oebb.sh update > $ . ~/.oe/environment-2008 > $ bitbake wpa-gui > After about 6 minutes this ends in the error: > NOTE: Running task 26 of 4564 (ID: 37, > /home/yoder/BeagleBoard/oe/sources/openembedded/recipes/quilt/quilt-native_0.48.bb, > do_package_write_ipk) > ERROR: Logfile of failure stored in: /dev/null > Log data follows: > NOTE: package quilt-native-0.48-r7.1: task sysroot_stage_all: Failed > ERROR: Function 'sysroot_stage_all' failed (see /dev/null for further > information) > ERROR: Task 23 > (/home/yoder/BeagleBoard/oe/sources/openembedded/recipes/quilt/quilt-native_0.48.bb, > do_populate_sysroot) failed with exit code '1' > Waiting for 1 active tasks to finish: > 0: quilt-native-0.48-r7.1 do_package_write_ipk (pid 30971) > NOTE: package quilt-native-0.48-r7.1: task do_package_write_ipk: Started > NOTE: package quilt-native-0.48-r7.1: task do_package_write_ipk: Succeeded > ERROR: > '/home/yoder/BeagleBoard/oe/sources/openembedded/recipes/quilt/quilt-native_0.48.bb' > failed > The whole output is here [2]. I'm running Ubuntu 10.4. The oe directory > was initially empty. I even removed the ~/.oe/environment from a previous > install. > Anyone have suggestions on what to do next?
Did you delete the temp directory and try again? Given that you'd done another build before this setup, I'm wondering if there is a chance you have some stale bits in the picture. > --Mark > [1] http://www.angstrom-distribution.org/building-angstrom > [2] http://pastebin.com/P0s8QNur > > -- > You received this message because you are subscribed to the Google Groups > "Beagle Board" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/beagleboard/-/t2k7slKnHmEJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/beagleboard?hl=en. > _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
