Hi, Some "generic" clues: Kernel modules are installed in the file system by adding "kernel-modules" to "IMAGE_INSTALL". Some packages build their modules separately and then you need to add something like "kernel-module-XYZ" to "IMAGE_INSTALL", this should be visible from the respective recipe.
Hope this helps, Mats ________________________________________ From: [email protected] [[email protected]] on behalf of Christian Borutta [[email protected]] Sent: Wednesday, July 13, 2011 2:30 PM To: [email protected] Subject: [oe] using i2c on a mx28evk Hello, I'm running an Angström Linux on a Freescale mx28evk board. For using the i2c ports of the board I compiled and installed the packages i2c and i2c-dev, but the Kernelmoduls are missing. While booting the system sends the message: " FATAL: Module i2c-pxa not found. FATAL: Module i2c-pxa not found." I'm neither able to load the modules with modprobe nor do I find the modules ( I think one of them is i2c-dev.ko) anywhere in the filesystem. Can anybody help me solving this issue? Christian Borutta Schoeps Mikrofone Schalltechnik Dr.-Ing. Schoeps GmbH Spitalstr. 20 76227 Karlsruhe - Germany Phone:+49 (0)721-94320-42 Fax: +49 (0)721-94320-50 www.schoeps.de Sitz der Gesellschaft: Karlsruhe Amtsgericht Mannheim, HRB Nr. 102442 Geschäftsführer: Ulrich Schoeps, Dr. Helmut Wittek _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
