Hi, this problem I face since a while but didn't find the time to take care. Since udev 180 overo's wlan does not work (marvel) and I get:
at early user space: udevd[77]: starting version 181 Starting POSIX Message Queue File System... Started Configuration File System [ OK ] Started Security File System [ OK ] Started FUSE Control File System [ OK ] Started udev Kernel Device Manager [ OK ] Started Lock Directory [ OK ] Started Runtime Directory [ OK ] Started Media Directory [ OK ] Started Remount API VFS [ OK ] Started Apply Kernel Variables [ OK ] Started Debug File System [ OK ] Started File System Check on Root Device [ OK ] Started POSIX Message Queue File System [ OK ] Starting Remount Root FS... Started udev Coldplug all Devices [ OK ] _regulator_get: spi1.0 supply vcc not found, using dummy regulator ads7846 spi1.0: touchscreen, irq 274 ads7846 spi1.0: no device detected, test read result was 0x00000000 cfg80211: Calling CRDA to update world regulatory domain Started Remount Root FS [ OK ] libertas_sdio: Libertas SDIO driver libertas_sdio: Copyright Pierre Ossman Right after login prompt: libertas_sdio mmc1:0001:1: (unregistered net_device): ff:ff:ff:ff:ff:ff, fw 0.0.0p0, cap 0x00000000 libertas_sdio mmc1:0001:1: (unregistered net_device): unidentified region code; using the default (USA) libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter and cyclic ~every 3s libertas_sdio mmc1:0001:1: wlan0: command 0x0000 timed out libertas_sdio mmc1:0001:1: wlan0: Timeout submitting command 0x0000 With udev 175 wlan is working properly and I get after boot prompt (please ignore 'Network Manager Wait Online'-lines. This is for test and it looks same with unmodified networkmanager): Angstrom v2012.03-core - Kernel 3.0.17+ overo login: cfg80211: Calling CRDA to update world regulatory domain Started Network Manager [ OK ] Starting Network Manager Wait Online... Failed to start Network Manager Wait Online [FAILED] See 'systemctl status NetworkManager-wait-online.service' for details. Starting Network Time Service... smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xd0808000, IRQ: 336 Started Network Time Service [ OK ] libertas_sdio: Libertas SDIO driver libertas_sdio: Copyright Pierre Ossman Starting Getty on tty1... Started Getty on tty1 [ OK ] libertas_sdio mmc1:0001:1: (unregistered net_device): 00:19:88:20:72:5c, fw 9.70.3p14, cap 0x00000303 libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter Any suggestions where to get further information on how to solve? Is it possible that the changed sequence causes adapter not yet started up when reading MAC / firmware info? Thanks in advance Andreas _______________________________________________ Openembedded-devel mailing list Openembedded-devel@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
