On Sun, Apr 14, 2013 at 8:40 PM, Martin Jansa <[email protected]> wrote: > On Sun, Apr 14, 2013 at 07:50:31PM +0200, Andrea Adami wrote: >> * the spitz_pm patch was pushed upstream with commit >> * id 510fcb0d331f314cd20d0067d56f29302846f47b >> * >> * remove it to unbreak do_patch > > Now it builds with latest oe-core, but still doesn't boot for me.
There is an outstanding regression due to the power regulators rework: boot from SD/CF card is atm impossible on pxa Zaurus (and on collie too, until refresh of thesing's locomo_spi patch). We are working on it. Thanks for your testings Cheers Andrea > >> Signed-off-by: Andrea Adami <[email protected]> >> --- >> .../linux/linux-yocto-3.8/akita/akita.scc | 1 - >> .../linux/linux-yocto-3.8/spitz/spitz.scc | 1 - >> .../linux/linux-yocto-3.8/spitz_pm.patch | 53 >> ---------------------- >> 3 files changed, 55 deletions(-) >> delete mode 100644 recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch >> >> diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc >> b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc >> index e1549ef..bad38c4 100644 >> --- a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc >> +++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc >> @@ -6,6 +6,5 @@ include ../zaurus-common.scc >> include ../zaurus-usb-host.scc >> >> patch sharpsl_param.patch >> -patch spitz_pm.patch >> patch pxa27x-sa1100-rtc.patch >> patch spi-pxa2xx-fix-mem.patch >> diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc >> b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc >> index fe6aac8..f9f9381 100644 >> --- a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc >> +++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc >> @@ -5,6 +5,5 @@ include ../zaurus-common.scc >> include ../zaurus-usb-host.scc >> >> patch sharpsl_param.patch >> -patch spitz_pm.patch >> patch pxa27x-sa1100-rtc.patch >> patch spi-pxa2xx-fix-mem.patch >> diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch >> b/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch >> deleted file mode 100644 >> index 34bcb9d..0000000 >> --- a/recipes-kernel/linux/linux-yocto-3.8/spitz_pm.patch >> +++ /dev/null >> @@ -1,53 +0,0 @@ >> -Subject: [PATCH] [ARM] pxa/spitz_pm.c: Fix hang under certain conditions >> when resuming from STR. >> - >> -Devices that use spitz_pm.c will fail to resume >> -from STR (Suspend To Ram) when the charger plug is inserted >> -or removed when a device is in STR mode. The culprit is >> -a misconfigured gpio line - GPIO18. GPIO18 should be configured as a >> -regular GPIO input but it gets configured as an alternate function >> -GPIO18_RDY. And then later in postsuspend() it gets configured as >> -a regular GPIO18 input line. >> - >> -Fix this by removing the GPIO18_RDY configuration so that GPIO18 >> -only gets configured as a regular gpio input. >> - >> -Signed-off-by: Marko Katic <[email protected]> >> ---- >> - arch/arm/mach-pxa/spitz_pm.c | 8 ++------ >> - 1 files changed, 2 insertions(+), 6 deletions(-) >> - >> -diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c >> -index 438f02f..842596d 100644 >> ---- a/arch/arm/mach-pxa/spitz_pm.c >> -+++ b/arch/arm/mach-pxa/spitz_pm.c >> -@@ -86,10 +86,7 @@ static void spitz_discharge1(int on) >> - gpio_set_value(SPITZ_GPIO_LED_GREEN, on); >> - } >> - >> --static unsigned long gpio18_config[] = { >> -- GPIO18_RDY, >> -- GPIO18_GPIO, >> --}; >> -+static unsigned long gpio18_config = GPIO18_GPIO; >> - >> - static void spitz_presuspend(void) >> - { >> -@@ -112,7 +109,7 @@ static void spitz_presuspend(void) >> - PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; >> - PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); >> - >> -- pxa2xx_mfp_config(&gpio18_config[0], 1); >> -+ pxa2xx_mfp_config(&gpio18_config, 1); >> - gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); >> - gpio_free(18); >> - >> -@@ -131,7 +128,6 @@ static void spitz_presuspend(void) >> - >> - static void spitz_postsuspend(void) >> - { >> -- pxa2xx_mfp_config(&gpio18_config[1], 1); >> - } >> - >> - static int spitz_should_wakeup(unsigned int resume_on_alarm) >> --- >> -1.7.4.1 >> -- >> 1.8.1.5 >> >> >> _______________________________________________ >> Openembedded-devel mailing list >> [email protected] >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > > -- > Martin 'JaMa' Jansa jabber: [email protected] > > _______________________________________________ > Openembedded-devel mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
