On Tue, Apr 16, 2013 at 10:05:16PM +0200, Martin Jansa wrote: > On Tue, Apr 16, 2013 at 12:39:38AM +0200, Andrea Adami wrote: > > * fix boot from MMC/SD > > * as seen on https://patchwork.kernel.org/patch/1875561/ > > This time it booted, thanks!
One more request 45M /boot/modules--3.8.4+git0+27b63fdbd25ad1a37bacc05f49a205c150d21779_11998bd1f44b21cd0b8c0ca11cbd36865f14bfdc-r4.1.2-spitz-20130416163203.tgz and still it doesn't contain any wireless modules could you enable at least hostap and tkip so that wpa2 works again with CF wifi? I know I can modify it locally but it sounds useful for everybody, so I'm not sure why it was disabled (I don't mind if it's not in spitz's EXTRA_RRECOMMENDS... installing them from feed is easy if you do it before loosing connectivity) SHRZ root@zjama ~ $ find /lib/modules/3.4.0/kernel/drivers/net/wireless/ /lib/modules/3.4.0/kernel/drivers/net/wireless/ /lib/modules/3.4.0/kernel/drivers/net/wireless/airo.ko /lib/modules/3.4.0/kernel/drivers/net/wireless/hostap /lib/modules/3.4.0/kernel/drivers/net/wireless/hostap/hostap.ko /lib/modules/3.4.0/kernel/drivers/net/wireless/hostap/hostap_cs.ko /lib/modules/3.4.0/kernel/drivers/net/wireless/airo_cs.ko SHRZ root@zjama ~ $ find /lib/modules/3.4.0/kernel/net/wireless/ /lib/modules/3.4.0/kernel/net/wireless/ /lib/modules/3.4.0/kernel/net/wireless/lib80211_crypt_tkip.ko /lib/modules/3.4.0/kernel/net/wireless/cfg80211.ko /lib/modules/3.4.0/kernel/net/wireless/lib80211_crypt_wep.ko /lib/modules/3.4.0/kernel/net/wireless/lib80211.ko /lib/modules/3.4.0/kernel/net/wireless/lib80211_crypt_ccmp.ko > > > Signed-off-by: Andrea Adami <[email protected]> > > --- > > .../linux/linux-yocto-3.8/akita/akita.scc | 1 + > > recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc | 2 +- > > .../linux/linux-yocto-3.8/poodle/poodle.scc | 1 + > > .../linux/linux-yocto-3.8/pxamci-regulator.patch | 135 > > +++++++++++++++++++++ > > .../linux/linux-yocto-3.8/spitz/spitz.scc | 1 + > > recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc | 1 + > > 6 files changed, 140 insertions(+), 1 deletion(-) > > create mode 100644 > > recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch > > > > diff --git a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc > > b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc > > index bad38c4..b40cb7e 100644 > > --- a/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc > > +++ b/recipes-kernel/linux/linux-yocto-3.8/akita/akita.scc > > @@ -8,3 +8,4 @@ include ../zaurus-usb-host.scc > > patch sharpsl_param.patch > > patch pxa27x-sa1100-rtc.patch > > patch spi-pxa2xx-fix-mem.patch > > +patch pxamci-regulator.patch > > diff --git a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc > > b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc > > index 99b1d12..a732d5e 100644 > > --- a/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc > > +++ b/recipes-kernel/linux/linux-yocto-3.8/c7x0/c7x0.scc > > @@ -5,4 +5,4 @@ include ../zaurus-common.scc > > > > patch sharpsl_param.patch > > patch spi-pxa2xx-fix-mem.patch > > - > > +patch pxamci-regulator.patch > > diff --git a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc > > b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc > > index 1dd2144..cfe97be 100644 > > --- a/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc > > +++ b/recipes-kernel/linux/linux-yocto-3.8/poodle/poodle.scc > > @@ -6,3 +6,4 @@ include ../zaurus-common.scc > > patch locomo_kbd_tweak-r2.patch > > patch sharpsl_param.patch > > patch spi-pxa2xx-fix-mem.patch > > +patch pxamci-regulator.patch > > diff --git a/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch > > b/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch > > new file mode 100644 > > index 0000000..8e7c521 > > --- /dev/null > > +++ b/recipes-kernel/linux/linux-yocto-3.8/pxamci-regulator.patch > > @@ -0,0 +1,135 @@ > > +From: Marko Katic <dromede.gmail.com> > > + > > +Here's an interesting scenario. The spitz machine has an > > +Intersil 6271A voltage regulator and an ADS7846 touchscreen > > +controller. > > + > > +The ADS7846 driver _requires_ the use of a voltage regulator > > +or if not present, CONFIG_REGULATOR_DUMMY should be used for proper > > operation. > > +This was made mandatory by the following commit: > > + > > +======================================== > > +91143379b01b2020d8878d627ebe9dfb9d6eb4c8 > > +Input: ads7846 - add regulator support > > + > > +The ADS7846/TSC2046 touchscreen controllers can (and usually are) > > +connected to various regulators for power, so add regulator support. > > + > > +Valid regulator will now be required, so boards without complete > > +regulator setup should either disable regulator framework or enable > > +CONFIG_REGULATOR_DUMMY. > > +======================================== > > + > > +The ADS7846 in spitz machines is not connected to > > +any power regulator so it needs CONFIG_REGULATOR_DUMMY enabled. > > +So to support both the Intersil 6271A regulator and > > +the ADS7846 controller, CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY have > > +to be defined. > > + > > +However, enabling CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY > > +will break pxamci driver and cause the following error output: > > + > > +pxa2xx-mci.0 supply vmmc not found, using dummy regulator > > +pxa2xx-mci pxa2xx-mci.0: ocr_mask/setpower will not be used > > +pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22) > > +pxa2xx-mci pxa2xx-mci.0: unable to set power > > +pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22) > > +pxa2xx-mci pxa2xx-mci.0: unable to set power > > + > > +Above failures occur in two functions; > > +pxamci_init_ocr() and pxamci_set_power(). > > + > > +Regulator support in pxamci_init_ocr() is not > > +written with the existence of the dummy regulator driver in > > +mind. It does not check the return value of mmc_regulator_get_ocrmask() > > +and it will only fall back to platform data if no regulator was found. > > + > > +pxamci_set_power() fails because it does not even try to fall back > > +to platform data if mmc_regulator_set_ocr() fails. It > > +expects a proper regulator or no regulator at all. It will > > +only fall back to platform data if no regulator was found. It does > > +not properly handle the possible existence of the dummy regulator. > > + > > +This patch refactors pxamci_init_ocr() and pxamci_set_power() regulator > > +support to be more modular, to do more checks and to always fall back > > +to platform data. > > + > > +Signed-off-by: Marko Katic <[email protected]> > > +--- > > + drivers/mmc/host/pxamci.c | 37 ++++++++++++++++++++++++------------- > > + 1 file changed, 24 insertions(+), 13 deletions(-) > > + > > +diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c > > +index 2b2f65a..6ec1566 100644 > > +--- a/drivers/mmc/host/pxamci.c > > ++++ b/drivers/mmc/host/pxamci.c > > +@@ -83,18 +83,24 @@ struct pxamci_host { > > + static inline void pxamci_init_ocr(struct pxamci_host *host) > > + { > > + #ifdef CONFIG_REGULATOR > > ++ int ocr_mask; > > + host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc"); > > + > > + if (IS_ERR(host->vcc)) > > + host->vcc = NULL; > > + else { > > +- host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc); > > +- if (host->pdata && host->pdata->ocr_mask) > > ++ ocr_mask = mmc_regulator_get_ocrmask(host->vcc); > > ++ if (ocr_mask <= 0) > > ++ host->mmc->ocr_avail = 0; > > ++ else > > ++ host->mmc->ocr_avail = ocr_mask; > > ++ > > ++ if (host->pdata && host->pdata->ocr_mask && > > host->mmc->ocr_avail) > > + dev_warn(mmc_dev(host->mmc), > > + "ocr_mask/setpower will not be used\n"); > > + } > > + #endif > > +- if (host->vcc == NULL) { > > ++ if (host->vcc == NULL || host->mmc->ocr_avail == 0) { > > + /* fall-back to platform data */ > > + host->mmc->ocr_avail = host->pdata ? > > + host->pdata->ocr_mask : > > +@@ -108,26 +114,31 @@ static inline int pxamci_set_power(struct > > pxamci_host *host, > > + { > > + int on; > > + > > ++#ifdef CONFIG_REGULATOR > > + if (host->vcc) { > > +- int ret; > > ++ int ret = 0; > > + > > +- if (power_mode == MMC_POWER_UP) { > > ++ if (power_mode == MMC_POWER_UP) > > + ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd); > > +- if (ret) > > +- return ret; > > +- } else if (power_mode == MMC_POWER_OFF) { > > ++ > > ++ if (power_mode == MMC_POWER_OFF) > > + ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); > > +- if (ret) > > +- return ret; > > +- } > > ++ > > ++ if (ret == 0) > > ++ return 0; > > ++ else > > ++ dev_warn(mmc_dev(host->mmc), > > ++ "mmc_regulator_set_ocr failed, falling back to > > platform data\n"); > > + } > > +- if (!host->vcc && host->pdata && > > ++#endif > > ++ > > ++ if (host->pdata && > > + gpio_is_valid(host->pdata->gpio_power)) { > > + on = ((1 << vdd) & host->pdata->ocr_mask); > > + gpio_set_value(host->pdata->gpio_power, > > + !!on ^ host->pdata->gpio_power_invert); > > + } > > +- if (!host->vcc && host->pdata && host->pdata->setpower) > > ++ if (host->pdata && host->pdata->setpower) > > + host->pdata->setpower(mmc_dev(host->mmc), vdd); > > + > > + return 0; > > diff --git a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc > > b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc > > index f9f9381..be8c470 100644 > > --- a/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc > > +++ b/recipes-kernel/linux/linux-yocto-3.8/spitz/spitz.scc > > @@ -7,3 +7,4 @@ include ../zaurus-usb-host.scc > > patch sharpsl_param.patch > > patch pxa27x-sa1100-rtc.patch > > patch spi-pxa2xx-fix-mem.patch > > +patch pxamci-regulator.patch > > diff --git a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc > > b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc > > index d1f0dbd..b4d6e8e 100644 > > --- a/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc > > +++ b/recipes-kernel/linux/linux-yocto-3.8/tosa/tosa.scc > > @@ -6,3 +6,4 @@ include ../zaurus-usb-host.scc > > > > patch sharpsl_param.patch > > patch spi-pxa2xx-fix-mem.patch > > +patch pxamci-regulator.patch > > -- > > 1.8.1.5 > > > > > > _______________________________________________ > > Openembedded-devel mailing list > > [email protected] > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > > -- > Martin 'JaMa' Jansa jabber: [email protected] > Uncompressing Linux... done, booting the kernel. > Booting Linux on physical CPU 0x0 > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Linux version 3.8.4-yocto-standard (bitbake@jama) (gcc version 4.7.2 (GCC) ) > #1 PREEMPT Tue Apr 16 18:41:39 CEST 2013 > CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE), cr=0000397f > CPU: VIVT data cache, VIVT instruction cache > Machine: SHARP Spitz > Memory policy: ECC disabled, Data cache writeback > BUG: mapping for 0x00000000 at 0xff000000 out of vmalloc space > Run Mode clock: 208.00MHz (*16) > Turbo Mode clock: 416.00MHz (*2.0, active) > Memory clock: 208.00MHz (/2) > System bus clock: 208.00MHz > On node 0 totalpages: 16384 > free_area_init_node: node 0, pgdat c08bdbd8, node_mem_map c0952000 > Normal zone: 128 pages used for memmap > Normal zone: 0 pages reserved > Normal zone: 16256 pages, LIFO batch:3 > pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > pcpu-alloc: [0] 0 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 > Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext2 rootwait > mtdparts=sharpsl-nand:7168k(smf),5120k(root),-(home) fbcon=rotate:1 > console=ttyS0,115200n8 console=tty1 fbcon=rotate:1 debug > PID hash table entries: 256 (order: -2, 1024 bytes) > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > __ex_table already sorted, skipping sort > allocated 131072 bytes of page_cgroup > please try 'cgroup_disable=memory' option if you don't want memory cgroups > Memory: 64MB = 64MB total > Memory: 55260k/55260k available, 10276k reserved, 0K highmem > Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > vmalloc : 0xc4800000 - 0xff000000 ( 936 MB) > lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) > modules : 0xbf000000 - 0xc0000000 ( 16 MB) > .text : 0xc0008000 - 0xc07dd498 (8022 kB) > .init : 0xc07de000 - 0xc086fefc ( 584 kB) > .data : 0xc0870000 - 0xc08c0168 ( 321 kB) > .bss : 0xc08c0168 - 0xc095131c ( 581 kB) > NR_IRQS:16 nr_irqs:288 288 > sched_clock: 32 bits at 3250kHz, resolution 307ns, wraps every 1321528ms > Console: colour dummy device 80x30 > console [tty1] enabled > Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672) > pid_max: default: 32768 minimum: 301 > Security Framework initialized > Mount-cache hash table entries: 512 > Initializing cgroup subsys debug > Initializing cgroup subsys cpuacct > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > Initializing cgroup subsys blkio > CPU: Testing write buffer coherency: ok > ftrace: allocating 21198 entries in 63 pages > Setting up static identity map for 0xa05d2660 - 0xa05d26cc > devtmpfs: initialized > regulator-dummy: no parameters > NET: Registered protocol family 16 > DMA: preallocated 256 KiB pool for atomic coherent allocations > Sharp Scoop Device found at 0x10800000 -> 0xc4846000 > Sharp Scoop Device found at 0x08800040 -> 0xc4848040 > bio: create slab <bio-0> at 0 > SCSI subsystem initialized > libata version 3.00 loaded. > pxa2xx-spi pxa2xx-spi.2: master is unqueued, this is deprecated > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > I2C: i2c-0: PXA I2C adapter > I2C: i2c-1: PXA I2C adapter > Switching to clocksource oscr0 > NET: Registered protocol family 2 > TCP established hash table entries: 512 (order: 0, 4096 bytes) > TCP bind hash table entries: 512 (order: -1, 2048 bytes) > TCP: Hash tables configured (established 512 bind 512) > TCP: reno registered > UDP hash table entries: 256 (order: 0, 4096 bytes) > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > NET: Registered protocol family 1 > RPC: Registered named UNIX socket transport module. > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > CPU PMU: probing PMU on CPU 0 > hw perfevents: enabled with xscale2 PMU driver, 5 counters available > NFS: Registering the id_resolver key type > Key type id_resolver registered > Key type id_legacy registered > jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. > Btrfs loaded > yaffs: yaffs built Apr 16 2013 18:39:47 Installing. > msgmni has been set to 107 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > Console: switching to colour frame buffer device 80x30 > PXA Overlay driver loaded successfully! > pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a UART1 > pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 > pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 202) > pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 > pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 201) > console [ttyS0] enabled > pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a UART2 > pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a UART3 > brd: module loaded > scsi0 : pata_pcmcia > ata1: PATA max PIO0 cmd 0xc4880000 ctl 0xc488000e irq 202 > physmap platform flash device: 00800000 at 00000000 > Creating 1 MTD partitions on "physmap-flash": > 0x000000140000-0x000000800000 : "Boot PROM Filesystem" > NAND device: Manufacturer ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MiB 3,3V > 8-bit), 16MiB, page size: 512, OOB size: 16 > Scanning device for bad blocks > 3 cmdlinepart partitions found on MTD device sharpsl-nand > Creating 3 MTD partitions on "sharpsl-nand": > 0x000000000000-0x000000700000 : "smf" > 0x000000700000-0x000000c00000 : "root" > 0x000000c00000-0x000001000000 : "home" > usbcore: registered new interface driver kaweth > pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver > usbcore: registered new interface driver pegasus > usbcore: registered new interface driver asix > usbcore: registered new interface driver cdc_ether > usbcore: registered new interface driver dm9601 > usbcore: registered new interface driver smsc75xx > usbcore: registered new interface driver smsc95xx > usbcore: registered new interface driver net1080 > usbcore: registered new interface driver cdc_subset > usbcore: registered new interface driver zaurus > usbcore: registered new interface driver MOSCHIP usb-ethernet driver > usbcore: registered new interface driver int51x1 > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ata1.00: CFA: HMS360404D5CF00, DN4SCA2A, max PIO4 > ata1.00: 7999488 sectors, multi 0: LBA > ohci_hcd: block sizes: ed 64 td 64 > In ohci_hcd_pxa27x_drv_probe > pxa27x-ohci pxa27x-ohci: PXA27x OHCI > pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1 > pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000 > pxa27x-ohci pxa27x-ohci: ohci_pxa27x_start, ohci:c3aa38d8 > pxa27x-ohci pxa27x-ohci: created debug files > pxa27x-ohci pxa27x-ohci: OHCI controller state > pxa27x-ohci pxa27x-ohci: OHCI 1.0, NO legacy support registers, rh state > running > pxa27x-ohci pxa27x-ohci: control 0x083 HCFS=operational CBSR=3 > pxa27x-ohci pxa27x-ohci: cmdstatus 0x00000 SOC=0 > pxa27x-ohci pxa27x-ohci: intrstatus 0x00000004 SF > pxa27x-ohci pxa27x-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH > pxa27x-ohci pxa27x-ohci: hcca frame #002b > pxa27x-ohci pxa27x-ohci: roothub.a 04001202 POTPGT=4 NOCP NPS NDP=2(3) > pxa27x-ohci pxa27x-ohci: roothub.b 00000000 PPCM=0000 DR=0000 > pxa27x-ohci pxa27x-ohci: roothub.status 00008000 DRWE > pxa27x-ohci pxa27x-ohci: roothub.portstatus [0] 0x00000100 PPS > pxa27x-ohci pxa27x-ohci: roothub.portstatus [1] 0x00000100 PPS > pxa27x-ohci pxa27x-ohci: roothub.portstatus [2] 0x00000100 PPS > usb usb1: default language 0x0409 > usb usb1: udev 1, busnum 1, minor = 0 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: PXA27x OHCI > usb usb1: Manufacturer: Linux 3.8.4-yocto-standard ohci_hcd > usb usb1: SerialNumber: pxa27x > usb usb1: usb_probe_device > usb usb1: configuration #1 chosen from 1 choice > usb usb1: adding 1-0:1.0 (config #1, interface 0) > hub 1-0:1.0: usb_probe_interface > hub 1-0:1.0: usb_probe_interface - got id > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 3 ports detected > hub 1-0:1.0: standalone hub > hub 1-0:1.0: no power switching (usb 1.0) > hub 1-0:1.0: no over-current protection > hub 1-0:1.0: power on to power good time: 8ms > hub 1-0:1.0: 150mA bus power budget for each child > hub 1-0:1.0: local power source is good > hub 1-0:1.0: trying to enable port power on non-switchable hub > mousedev: PS/2 mouse device common for all mice > input: matrix-keypad as /devices/platform/matrix-keypad/input/input0 > spi2.0 supply vcc not found, using dummy regulator > ads7846 spi2.0: touchscreen, irq 107 > input: ADS7846 Touchscreen as > /devices/platform/pxa2xx-spi.2/spi_master/spi2/spi2.0/input/input1 > sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0 > APM Battery Driver > md: linear personality registered for level -1 > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid10 personality registered for level 10 > md: multipath personality registered for level -4 > md: faulty personality registered for level -5 > device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: > [email protected] > pxa2xx-mci.0 supply vmmc not found, using dummy regulator > hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000 > pxa2xx-mci pxa2xx-mci.0: could not set regulator OCR (-22) > pxa2xx-mci pxa2xx-mci.0: mmc_regulator_set_ocr failed, falling back to > platform data > TCP: cubic registered > NET: Registered protocol family 10 > sit: IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > Key type dns_resolver registered > XScale iWMMXt coprocessor detected. > console [netcon0] enabled > netconsole: network logging started > input: gpio-keys as /devices/platform/gpio-keys/input/input2 > sa1100-rtc sa1100-rtc: setting system clock to 1970-01-05 09:54:27 UTC > (381267) > mmc0: new SD card at address 1234 > mmcblk0: mmc0:1234 SA01G 972 MiB > mmcblk0: p1 > ata1.00: configured for PIO0 > scsi 0:0:0:0: Direct-Access ATA HMS360404D5CF00 DN4S PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 7999488 512-byte logical blocks: (4.09 GB/3.81 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support > DPO or FUA > sda: sda1 sda2 sda3 > sd 0:0:0:0: [sda] Attached SCSI disk > md: Waiting for all devices to be available before autodetect > md: If you don't use raid, use raid=noautodetect > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > VFS: Mounted root (ext2 filesystem) readonly on device 179:1. > devtmpfs: mounted > Freeing init memory: 580K > systemd[1]: systemd 199 running in system mode. (+PAM -LIBWRAP -AUDIT > -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL +XZ) > systemd[1]: Set hostname to <zjama>. > systemd[1]: Initializing machine ID from D-Bus machine ID. > systemd[1]: Installed transient /etc/machine-id file. > systemd[1]: Cannot add dependency job for unit fsosystemd.service, ignoring: > Unit fsosystemd.service failed to load: No such file or directory. See system > logs and 'systemctl status fsosystemd.service' for details. > systemd[1]: Cannot add dependency job for unit fso-gpsd.service, ignoring: > Unit fso-gpsd.service failed to load: No such file or directory. See system > logs and 'systemctl status fso-gpsd.service' for details. > systemd[1]: Expecting device dev-ttyS0.device... > systemd[1]: Starting Forward Password Requests to Wall Directory Watch. > systemd[1]: Started Forward Password Requests to Wall Directory Watch. > systemd[1]: Starting Syslog Socket. > systemd[1]: Listening on Syslog Socket. > systemd[1]: Starting Remote File Systems. > systemd[1]: Reached target Remote File Systems. > systemd[1]: Starting /dev/initctl Compatibility Named Pipe. > systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. > systemd[1]: Starting Delayed Shutdown Socket. > systemd[1]: Listening on Delayed Shutdown Socket. > systemd[1]: Starting udev Kernel Socket. > systemd[1]: Listening on udev Kernel Socket. > systemd[1]: Starting udev Control Socket. > systemd[1]: Listening on udev Control Socket. > systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. > systemd[1]: Started Dispatch Password Requests to Console Directory Watch. > systemd[1]: Starting Paths. > systemd[1]: Reached target Paths. > systemd[1]: Starting Journal Socket. > systemd[1]: Listening on Journal Socket. > systemd[1]: Starting Apply Kernel Variables... > systemd[1]: Starting Load Kernel Modules... > systemd[1]: Mounting POSIX Message Queue File System... > systemd[1]: Mounted Huge Pages File System. > systemd[1]: Started Machine ID first boot configure. > systemd[1]: Mounting Debug File System... > systemd[1]: Starting udev Kernel Device Manager... > systemd[1]: Starting udev Coldplug all Devices... > systemd[1]: Starting Journal Service... > systemd[1]: Started Journal Service. > systemd[1]: Starting Arbitrary Executable File Formats File System Automount > Point. > systemd[1]: Set up automount Arbitrary Executable File Formats File System > Automount Point. > systemd[1]: Started Set Up Additional Binary Formats. > systemd[1]: Expecting device dev-sda2.device... > systemd[1]: Starting File System Check on Root Device... > systemd[1]: Mounting Temporary Directory... > systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting > anyway. > systemd[1]: Expecting device dev-sda3.device... > systemd[1]: Started Apply Kernel Variables. > systemd[1]: Started Load Kernel Modules. > systemd[1]: Mounted Configuration File System. > systemd[1]: Mounted FUSE Control File System. > systemd-udevd[67]: starting version 199 > EXT4-fs (sda): VFS: Can't find ext4 filesystem > EXT3-fs (sda): error: can't find ext3 filesystem on dev sda. > EXT2-fs (sda): error: can't find an ext2 filesystem on dev sda. > cramfs: wrong magic > yaffs: dev is 8388608 name is "sda" rw > yaffs: passed flags "" > yaffs: yaffs: Attempting MTD mount of 8.0,"sda" > yaffs: MTD device does not support have the right page sizes > yaffs: dev is 8388608 name is "sda" rw > yaffs: passed flags "" > yaffs: yaffs: Attempting MTD mount of 8.0,"sda" > yaffs: MTD device does not have the right page sizes > kjournald starting. Commit interval 5 seconds > EXT3-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended > EXT3-fs (sda3): using internal journal > EXT3-fs (sda3): mounted filesystem with ordered data mode > systemd-journald[70]: File > /var/log/journal/cd7935a1120c614ccc9869e5000004b2/system.journal corrupted or > uncleanly shut down, renaming and replacing. > kjournald starting. Commit interval 5 seconds > EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is > recommended > EXT3-fs (sda1): using internal journal > EXT3-fs (sda1): mounted filesystem with ordered data mode > Adding 125492k swap on /dev/sda2. Priority:-1 extents:1 across:125492k > > shr 20130412 zjama ttyS0 > > zjama login: root > Password: > Last login: Mon Apr 15 18:50:56 UTC 2013 on ttyS0 > ____ _ _ ____ ___ __ ____ ____ > / ___)/ )( \( _ \ ___ / __)/ \( _ \( __) > \___ \) __ ( ) /(___)( (__( O )) / ) _) > (____/\_)(_/(__\_) \___)\__/(__\_)(____) > uname SHRZ root@zjama ~ $ uname -a > Linux zjama 3.8.4-yocto-standard #1 PREEMPT Tue Apr 16 18:41:39 CEST 2013 > armv5tel GNU/Linux > SHRZ root@zjama ~ $ -- Martin 'JaMa' Jansa jabber: [email protected]
signature.asc
Description: Digital signature
_______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
