The error is:
configure: error: source directory already configured; run "make distclean" there first
Try a clean build ? For example: bitbake dhcp -ccleansstate && bitbake dhcp If you get the same error again, you may need inherit autotools-brokensep rather than autotools as a quick workaround. // Robert On 07/10/2014 05:50 PM, Himanshu Pandey wrote:
Hi, As advised by you I have done that but again I am getting an error. Please find the log as attachment. Regards, Himanshu From: Robert Yang <[email protected]> Sent: Thu, 10 Jul 2014 14:08:59 To: Himanshu Pandey <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: Regarding dhcp package On 07/10/2014 04:17 PM, Himanshu Pandey wrote: > Hi Robert, > > I am getting an error while compiling my dhcp package. Please find the log as > attachment. > > My dhcp bb file is as follows: > > SECTION = "base" > SUMMARY = "Internet Software Consortium DHCP package" > DESCRIPTION = "DHCP (Dynamic Host Configuration Protocol) is a protocol \ > which allows individual devices on an IP network to get their own \ > network configuration information from a server. DHCP helps make it \ > easier to administer devices." > > HOMEPAGE = "http://www.isc.org/"; > > LICENSE = "CLOSED" > > DEPENDS = "openssl bind" > > SRC_URI = "svn://192.43.23.436/home/repo/dhcp-4.2.4-P2;module=branch;user=;pswd=" <http://192.43.23.436/home/repo/dhcp-4.2.4-P2;module=branch;user=;pswd=";> > SRCREV = "${AUTOREV}" > S= "${WORKDIR}/trunk" > #inherit autotools > do_compile() { > #cp -f ${WORKDIR}/trunk/include/site.h ${S}/includes > cd ../trunk > ./configure --prefix=${prefix} --host=${HOST_SYS} > make > } > I think that these are wrong, you should not disable the "inherit autotools", and should not use "./configure" or "make" directly, try to enable the "inherit autotools", and remove the do_compile section to see what would happen, maybe you need: inherit autotools S = "${WORKDIR}/trunk" // Robert > > do_install_append () { > install -d ${D}${sysconfdir}/init.d > install -d ${D}${sysconfdir}/default > install -d ${D}${sysconfdir}/dhcp > install -d /etc/dhcp > install -d /sbin > install -d /var/db > install -d /var/lib > install -d /usr/local/sbin/ > install -m 0755 ${D}/sbin/dhcrelay > install -m 0755 ${D}/sbin/dhcpd > install -m 0755 ${D}/sbin/dhclient-script > install -m 0755 ${D}/var/db/dhcpd.leases > install -m 0755 ${D}/var/lib/dhcpd > install -m 0755 ${D}/usr/local/sbin/dhclient > sudo touch ${D}/usr/local/bin/dhcpd-pools > rm -f ${D}${sysconfdir}/dhclient.conf* > rm -f ${D}${sysconfdir}/dhcpd.conf* > rm -f /etc/dhcpd.conf* > install -m 0644 ${WORKDIR}/dhcpd.conf ${D}/etc/dhcpd.conf > install -m 0644 ${WORKDIR}/dhclient.conf ${D}/etc/dhcp/dhclient.conf > > install -d ${D}${base_sbindir}/ > if [ "${sbindir}" != "${base_sbindir}" ]; then > mv ${D}${sbindir}/dhclient ${D}${base_sbindir}/ > fi > install -m 0755 ${S}/client/scripts/linux > ${D}${base_sbindir}/dhclient-script > } > > PACKAGES += "dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell" > > FILES_${PN} = "" > RDEPENDS_${PN}-dev = "" > RDEPENDS_${PN}-staticdev = "" > > FILES_dhcp-server = "${sbindir}/dhcpd ${sysconfdir}/init.d/dhcp-server" > RRECOMMENDS_dhcp-server = "dhcp-server-config" > > FILES_dhcp-server-config = "${sysconfdir}/default/dhcp-server > ${sysconfdir}/dhcp/dhcpd.conf" > > FILES_dhcp-relay = "${sbindir}/dhcrelay ${sysconfdir}/init.d/dhcp-relay > ${sysconfdir}/default/dhcp-relay" > > FILES_dhcp-client = "${base_sbindir}/dhclient ${base_sbindir}/dhclient-script > ${sysconfdir}/dhcp/dhclient.conf" > RDEPENDS_dhcp-client = "bash" > > FILES_dhcp-omshell = "${bindir}/omshell" > > pkg_postinst_dhcp-server() { > mkdir -p $D/${localstatedir}/lib/dhcp > touch $D/${localstatedir}/lib/dhcp/dhcpd.leases > touch $D/${localstatedir}/lib/dhcp/dhcpd6.leases > } > > pkg_postinst_dhcp-client() { > mkdir -p $D/${localstatedir}/lib/dhcp > } > > pkg_postrm_dhcp-server() { > rm -f $D/${localstatedir}/lib/dhcp/dhcpd.leases > rm -f $D/${localstatedir}/lib/dhcp/dhcpd6.leases > > if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then > echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty." > fi > } > > pkg_postrm_dhcp-client() { > rm -f $D/${localstatedir}/lib/dhcp/dhclient.leases > rm -f $D/${localstatedir}/lib/dhcp/dhclient6.leases > > if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then > echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty." > fi > } > > Please help. > > Regards, > Himanshu > > From: Robert Yang <[email protected]> > Sent: Wed, 02 Jul 2014 15:22:14 > To: Himanshu Pandey <[email protected]>, > "[email protected]" > <[email protected]> > Subject: Re: [bitbake-devel] Regarding rp-pppoe package > > > On 07/02/2014 05:49 PM, Himanshu Pandey wrote: > > Hi, > > > > I am getting following error when I tried to add and compile rp-pppoe pacakage: > > > > Please add the full error log, thanks. > > Btw, I will go to have dinner now, may reply tomorrow. > > // Robert > > > ERROR: oe_runconf failed > > > > Please help. > > > > Regards, > > Himanshu > > > > > > > > > > From: Robert Yang <[email protected]> > > Sent: Wed, 02 Jul 2014 13:16:17 > > To: Himanshu Pandey <[email protected]> > > Cc: openembedded-devel <[email protected]> > > Subject: Re: [bitbake-devel] Regarding Net-Snmp package > > > > I think that this email should go into oe-devel (see the cc) since > > the net-snmp is from the meta-networking layer, please see: > > > > meta-networking/recipes-protocols/net-snmp/net-snmp_5.7.2.bb > > > > PACKAGES = "${PN}-dbg ${PN}-doc ${PN}-dev ${PN}-staticdev ${PN}-static > ${PN}-libs \ > > ${PN}-mibs ${PN}-server ${PN}-client ${PN}-server-snmpd > > ${PN}-server-snmptrapd" > > > > There is no net-snmp in the PACKAGES, I think that you need use > > net-snmp-client or net-snmp-server. > > > > // Robert > > > > > > > > > > On 07/02/2014 03:36 PM, Himanshu Pandey wrote: > > > Hi, > > > > > > I am getting following errors: > > > > > > Error: net-snmp not found in the base feeds (genericx86_64 x86_64 noarch any > > all). > > > > > > sed: can't read > > > > > > /home/yocto/poky-dora-10.0.0/build/tmp/work/x86_64-poky-linux/net-snmp/5.7.2-r1/image/usr/bin/net-snmp-config: > > > No such file or directory > > > > > > Please help. > > > > > > Regards, > > > Himanshu > > > > > > > > > > > > <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?> > > > Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company > > email. > > > *Know More >* > > > > > > <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host> > > > > > > > > > > > > > > <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?> > > Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company > email. > > *Know More >* > > > <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host> > > > > <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?> > Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company email. > *Know More >* > <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host> > <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?> Get your own *FREE* website, *FREE* domain & *FREE* mobile app with Company email. *Know More >* <http://track.rediff.com/click?url=___http://businessemail.rediff.com/email-ids-for-companies-with-less-than-50-employees?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host>
-- _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-devel
