From: Changqing Li <[email protected]>
When starting radvd without any configuration the following errors would
be triggered.
"""
root@intel-x86-64:~# systemctl status radvd
● radvd.service - Router advertisement daemon for IPv6
Loaded: loaded (/lib/systemd/system/radvd.service; enabled; vendor preset:
enabled)
Active: inactive (dead)
Condition: start condition failed at Tue 2019-09-24 13:29:36 UTC; 3s ago
└─ ConditionPathExists=/etc/radvd.conf was not met
"""
Normally the user should create and configrue the /etc/radvd.conf
manually. However the radvd provide a example file for redhad located
at "radvd/redhat/radvd.conf.empty". When installing, it would copy
radvd/redhat/radvd.conf.empty to /etc/radvd.conf. Also add this empty
conf here to used as an example of configuration
Signed-off-by: Changqing Li <[email protected]>
---
.../recipes-daemons/radvd/files/radvd.conf | 18 ++++++++++++++++++
.../recipes-daemons/radvd/radvd.inc | 5 ++++-
2 files changed, 22 insertions(+), 1 deletion(-)
create mode 100644 meta-networking/recipes-daemons/radvd/files/radvd.conf
diff --git a/meta-networking/recipes-daemons/radvd/files/radvd.conf
b/meta-networking/recipes-daemons/radvd/files/radvd.conf
new file mode 100644
index 000000000..c006f8631
--- /dev/null
+++ b/meta-networking/recipes-daemons/radvd/files/radvd.conf
@@ -0,0 +1,18 @@
+# NOTE: there is no such thing as a working "by-default" configuration file.
+# At least the prefix needs to be specified. Please consult the
radvd.conf(5)
+# man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help.
+#
+#
+#interface eth0
+#{
+# AdvSendAdvert on;
+# MinRtrAdvInterval 30;
+# MaxRtrAdvInterval 100;
+# prefix 2001:db8:1:0::/64
+# {
+# AdvOnLink on;
+# AdvAutonomous on;
+# AdvRouterAddr off;
+# };
+#
+#};
diff --git a/meta-networking/recipes-daemons/radvd/radvd.inc
b/meta-networking/recipes-daemons/radvd/radvd.inc
index 59a07d78d..802dbe34e 100644
--- a/meta-networking/recipes-daemons/radvd/radvd.inc
+++ b/meta-networking/recipes-daemons/radvd/radvd.inc
@@ -18,7 +18,8 @@ SRC_URI =
"http://v6web.litech.org/radvd/dist/radvd-${PV}.tar.gz \
file://radvd.init \
file://radvd.service \
file://volatiles.03_radvd \
- file://radvd.default"
+ file://radvd.default \
+ file://radvd.conf"
inherit autotools useradd pkgconfig systemd
@@ -52,6 +53,8 @@ do_install_append () {
for i in radvd.conf.example README; do \
install -m 0644 ${S}/$i ${D}${docdir}/radvd; \
done
+
+ install -m 0644 ${WORKDIR}/radvd.conf ${D}${sysconfdir}/radvd.conf
}
USERADD_PACKAGES = "${PN}"
--
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#85830):
https://lists.openembedded.org/g/openembedded-devel/message/85830
Mute This Topic: https://lists.openembedded.org/mt/75678578/21656
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-devel/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
