InfluxDB is a time series database designed to handle high write and query loads.
Signed-off-by: Thomas Perrot <[email protected]> --- .../recipes-dbs/influxdb/influxdb/influxdb | 235 +++++++ .../influxdb/influxdb/influxdb.conf | 586 ++++++++++++++++++ .../recipes-dbs/influxdb/influxdb_1.7.10.bb | 63 ++ 3 files changed, 884 insertions(+) create mode 100755 meta-oe/recipes-dbs/influxdb/influxdb/influxdb create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf create mode 100644 meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb diff --git a/meta-oe/recipes-dbs/influxdb/influxdb/influxdb b/meta-oe/recipes-dbs/influxdb/influxdb/influxdb new file mode 100755 index 000000000..ffb29c3ae --- /dev/null +++ b/meta-oe/recipes-dbs/influxdb/influxdb/influxdb @@ -0,0 +1,235 @@ +#!/bin/bash +### BEGIN INIT INFO +# Provides: influxd +# Required-Start: $all +# Required-Stop: $remote_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Start the InfluxDB process +### END INIT INFO +set -x +# If you modify this, please make sure to also edit influxdb.service + +# Command-line options that can be set in /etc/default/influxdb. These will override +# any config file values. +DEFAULT=/etc/default/influxdb + +# Daemon options +INFLUXD_OPTS= + +# Process name ( For display ) +NAME=influxdb + +# User and group +USER=influxdb +GROUP=influxdb + +# Check for sudo or root privileges before continuing +if [ "$UID" != "0" ]; then + echo "You must be root to run this script" + exit 1 +fi + +# Daemon name, where is the actual executable If the daemon is not +# there, then exit. +DAEMON=/usr/bin/influxd +if [ ! -x $DAEMON ]; then + echo "Executable $DAEMON does not exist!" + exit 5 +fi + +# Configuration file +CONFIG=/etc/influxdb/influxdb.conf + +# PID file for the daemon +PIDFILE=/var/run/influxdb/influxd.pid +PIDDIR=`dirname $PIDFILE` +if [ ! -d "$PIDDIR" ]; then + mkdir -p $PIDDIR + chown $USER:$GROUP $PIDDIR +fi + +# Max open files +OPEN_FILE_LIMIT=65536 + +if [ -r /lib/lsb/init-functions ]; then + source /lib/lsb/init-functions +fi + +# Logging +if [ -z "$STDOUT" ]; then + STDOUT=/var/log/influxdb/influxd.log +fi + +if [ ! -f "$STDOUT" ]; then + mkdir -p $(dirname $STDOUT) +fi + +if [ -z "$STDERR" ]; then + STDERR=/var/log/influxdb/influxd.log +fi + +if [ ! -f "$STDERR" ]; then + mkdir -p $(dirname $STDERR) +fi + +# Override init script variables with DEFAULT values +if [ -r $DEFAULT ]; then + source $DEFAULT +fi + +function log_failure_msg() { + echo "$@" "[ FAILED ]" +} + +function log_success_msg() { + echo "$@" "[ OK ]" +} + +function start() { + # Check if config file exist + if [ ! -r $CONFIG ]; then + log_failure_msg "config file $CONFIG doesn't exist (or you don't have permission to view)" + exit 4 + fi + + # Check that the PID file exists, and check the actual status of process + if [ -f $PIDFILE ]; then + PID="$(cat $PIDFILE)" + if kill -0 "$PID" &>/dev/null; then + # Process is already up + log_success_msg "$NAME process is already running" + return 0 + fi + else + su -s /bin/sh -c "touch $PIDFILE" $USER &>/dev/null + if [ $? -ne 0 ]; then + log_failure_msg "$PIDFILE not writable, check permissions" + exit 5 + fi + fi + + # Bump the file limits, before launching the daemon. These will + # carry over to launched processes. + ulimit -n $OPEN_FILE_LIMIT + if [ $? -ne 0 ]; then + log_failure_msg "Unable to set ulimit to $OPEN_FILE_LIMIT" + exit 1 + fi + + # Launch process + echo "Starting $NAME..." + if command -v start-stop-daemon &>/dev/null; then + start-stop-daemon \ + --background \ + --chuid $USER:$GROUP \ + --start \ + --quiet \ + --pidfile $PIDFILE \ + --exec $DAEMON \ + -- \ + -config $CONFIG \ + $INFLUXD_OPTS >>$STDOUT 2>>$STDERR + else + local CMD="$DAEMON -config $CONFIG $INFLUXD_OPTS >>$STDOUT 2>>$STDERR &" + su -s /bin/sh -c "$CMD" $USER + fi + + # Sleep to verify process is still up + sleep 1 + echo $(pidof influxd) > $PIDFILE + if [ -f $PIDFILE ]; then + # PIDFILE exists + PID="$(cat $PIDFILE)" + if kill -0 "$PID" &>/dev/null; then + # PID up, service running + log_success_msg "$NAME process was started" + return 0 + fi + fi + log_failure_msg "$NAME process was unable to start" + exit 1 +} + +function stop() { + # Stop the daemon. + if [ -f $PIDFILE ]; then + local PID="$(cat $PIDFILE)" + if kill -0 $PID &>/dev/null; then + echo "Stopping $NAME..." + # Process still up, send SIGTERM and remove PIDFILE + kill -s TERM $PID &>/dev/null && rm -f "$PIDFILE" &>/dev/null + n=0 + while true; do + # Enter loop to ensure process is stopped + kill -0 $PID &>/dev/null + if [ "$?" != "0" ]; then + # Process stopped, break from loop + log_success_msg "$NAME process was stopped" + return 0 + fi + + # Process still up after signal, sleep and wait + sleep 1 + n=$(expr $n + 1) + if [ $n -eq 30 ]; then + # After 30 seconds, send SIGKILL + echo "Timeout exceeded, sending SIGKILL..." + kill -s KILL $PID &>/dev/null + elif [ $? -eq 40 ]; then + # After 40 seconds, error out + log_failure_msg "could not stop $NAME process" + exit 1 + fi + done + fi + fi + log_success_msg "$NAME process already stopped" +} + +function restart() { + # Restart the daemon. + stop + start +} + +function status() { + # Check the status of the process. + if [ -f $PIDFILE ]; then + PID="$(cat $PIDFILE)" + if kill -0 $PID &>/dev/null; then + log_success_msg "$NAME process is running" + exit 0 + fi + fi + log_failure_msg "$NAME process is not running" + exit 1 +} + +case $1 in + start) + start + ;; + + stop) + stop + ;; + + restart) + restart + ;; + + status) + status + ;; + + version) + $DAEMON version + ;; + + *) + # For invalid arguments, print the usage message. + echo "Usage: $0 {start|stop|restart|status|version}" + exit 2 + ;; +esac diff --git a/meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf b/meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf new file mode 100644 index 000000000..21c0926f2 --- /dev/null +++ b/meta-oe/recipes-dbs/influxdb/influxdb/influxdb.conf @@ -0,0 +1,586 @@ +### Welcome to the InfluxDB configuration file. + +# The values in this file override the default values used by the system if +# a config option is not specified. The commented out lines are the configuration +# field and the default value used. Uncommenting a line and changing the value +# will change the value used at runtime when the process is restarted. + +# Once every 24 hours InfluxDB will report usage data to usage.influxdata.com +# The data includes a random ID, os, arch, version, the number of series and other +# usage data. No data from user databases is ever transmitted. +# Change this option to true to disable reporting. +# reporting-disabled = false + +# Bind address to use for the RPC service for backup and restore. +# bind-address = "127.0.0.1:8088" + +### +### [meta] +### +### Controls the parameters for the Raft consensus group that stores metadata +### about the InfluxDB cluster. +### + +[meta] + # Where the metadata/raft database is stored + dir = "/var/lib/influxdb/meta" + + # Automatically create a default retention policy when creating a database. + # retention-autocreate = true + + # If log messages are printed for the meta service + # logging-enabled = true + +### +### [data] +### +### Controls where the actual shard data for InfluxDB lives and how it is +### flushed from the WAL. "dir" may need to be changed to a suitable place +### for your system, but the WAL settings are an advanced configuration. The +### defaults should work for most systems. +### + +[data] + # The directory where the TSM storage engine stores TSM files. + dir = "/var/lib/influxdb/data" + + # The directory where the TSM storage engine stores WAL files. + wal-dir = "/var/lib/influxdb/wal" + + # The amount of time that a write will wait before fsyncing. A duration + # greater than 0 can be used to batch up multiple fsync calls. This is useful for slower + # disks or when WAL write contention is seen. A value of 0s fsyncs every write to the WAL. + # Values in the range of 0-100ms are recommended for non-SSD disks. + # wal-fsync-delay = "0s" + + + # The type of shard index to use for new shards. The default is an in-memory index that is + # recreated at startup. A value of "tsi1" will use a disk based index that supports higher + # cardinality datasets. + # index-version = "inmem" + + # Trace logging provides more verbose output around the tsm engine. Turning + # this on can provide more useful output for debugging tsm engine issues. + # trace-logging-enabled = false + + # Whether queries should be logged before execution. Very useful for troubleshooting, but will + # log any sensitive data contained within a query. + # query-log-enabled = true + + # Validates incoming writes to ensure keys only have valid unicode characters. + # This setting will incur a small overhead because every key must be checked. + # validate-keys = false + + # Settings for the TSM engine + + # CacheMaxMemorySize is the maximum size a shard's cache can + # reach before it starts rejecting writes. + # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k). + # Values without a size suffix are in bytes. + # cache-max-memory-size = "1g" + + # CacheSnapshotMemorySize is the size at which the engine will + # snapshot the cache and write it to a TSM file, freeing up memory + # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k). + # Values without a size suffix are in bytes. + # cache-snapshot-memory-size = "25m" + + # CacheSnapshotWriteColdDuration is the length of time at + # which the engine will snapshot the cache and write it to + # a new TSM file if the shard hasn't received writes or deletes + # cache-snapshot-write-cold-duration = "10m" + + # CompactFullWriteColdDuration is the duration at which the engine + # will compact all TSM files in a shard if it hasn't received a + # write or delete + # compact-full-write-cold-duration = "4h" + + # The maximum number of concurrent full and level compactions that can run at one time. A + # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at runtime. Any number greater + # than 0 limits compactions to that value. This setting does not apply + # to cache snapshotting. + # max-concurrent-compactions = 0 + + # CompactThroughput is the rate limit in bytes per second that we + # will allow TSM compactions to write to disk. Note that short bursts are allowed + # to happen at a possibly larger value, set by CompactThroughputBurst + # compact-throughput = "48m" + + # CompactThroughputBurst is the rate limit in bytes per second that we + # will allow TSM compactions to write to disk. + # compact-throughput-burst = "48m" + + # If true, then the mmap advise value MADV_WILLNEED will be provided to the kernel with respect to + # TSM files. This setting has been found to be problematic on some kernels, and defaults to off. + # It might help users who have slow disks in some cases. + # tsm-use-madv-willneed = false + + # Settings for the inmem index + + # The maximum series allowed per database before writes are dropped. This limit can prevent + # high cardinality issues at the database level. This limit can be disabled by setting it to + # 0. + # max-series-per-database = 1000000 + + # The maximum number of tag values per tag that are allowed before writes are dropped. This limit + # can prevent high cardinality tag values from being written to a measurement. This limit can be + # disabled by setting it to 0. + # max-values-per-tag = 100000 + + # Settings for the tsi1 index + + # The threshold, in bytes, when an index write-ahead log file will compact + # into an index file. Lower sizes will cause log files to be compacted more + # quickly and result in lower heap usage at the expense of write throughput. + # Higher sizes will be compacted less frequently, store more series in-memory, + # and provide higher write throughput. + # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k). + # Values without a size suffix are in bytes. + # max-index-log-file-size = "1m" + + # The size of the internal cache used in the TSI index to store previously + # calculated series results. Cached results will be returned quickly from the cache rather + # than needing to be recalculated when a subsequent query with a matching tag key/value + # predicate is executed. Setting this value to 0 will disable the cache, which may + # lead to query performance issues. + # This value should only be increased if it is known that the set of regularly used + # tag key/value predicates across all measurements for a database is larger than 100. An + # increase in cache size may lead to an increase in heap usage. + series-id-set-cache-size = 100 + +### +### [coordinator] +### +### Controls the clustering service configuration. +### + +[coordinator] + # The default time a write request will wait until a "timeout" error is returned to the caller. + # write-timeout = "10s" + + # The maximum number of concurrent queries allowed to be executing at one time. If a query is + # executed and exceeds this limit, an error is returned to the caller. This limit can be disabled + # by setting it to 0. + # max-concurrent-queries = 0 + + # The maximum time a query will is allowed to execute before being killed by the system. This limit + # can help prevent run away queries. Setting the value to 0 disables the limit. + # query-timeout = "0s" + + # The time threshold when a query will be logged as a slow query. This limit can be set to help + # discover slow or resource intensive queries. Setting the value to 0 disables the slow query logging. + # log-queries-after = "0s" + + # The maximum number of points a SELECT can process. A value of 0 will make + # the maximum point count unlimited. This will only be checked every second so queries will not + # be aborted immediately when hitting the limit. + # max-select-point = 0 + + # The maximum number of series a SELECT can run. A value of 0 will make the maximum series + # count unlimited. + # max-select-series = 0 + + # The maximum number of group by time bucket a SELECT can create. A value of zero will max the maximum + # number of buckets unlimited. + # max-select-buckets = 0 + +### +### [retention] +### +### Controls the enforcement of retention policies for evicting old data. +### + +[retention] + # Determines whether retention policy enforcement enabled. + # enabled = true + + # The interval of time when retention policy enforcement checks run. + # check-interval = "30m" + +### +### [shard-precreation] +### +### Controls the precreation of shards, so they are available before data arrives. +### Only shards that, after creation, will have both a start- and end-time in the +### future, will ever be created. Shards are never precreated that would be wholly +### or partially in the past. + +[shard-precreation] + # Determines whether shard pre-creation service is enabled. + # enabled = true + + # The interval of time when the check to pre-create new shards runs. + # check-interval = "10m" + + # The default period ahead of the endtime of a shard group that its successor + # group is created. + # advance-period = "30m" + +### +### Controls the system self-monitoring, statistics and diagnostics. +### +### The internal database for monitoring data is created automatically if +### if it does not already exist. The target retention within this database +### is called 'monitor' and is also created with a retention period of 7 days +### and a replication factor of 1, if it does not exist. In all cases the +### this retention policy is configured as the default for the database. + +[monitor] + # Whether to record statistics internally. + # store-enabled = true + + # The destination database for recorded statistics + # store-database = "_internal" + + # The interval at which to record statistics + # store-interval = "10s" + +### +### [http] +### +### Controls how the HTTP endpoints are configured. These are the primary +### mechanism for getting data into and out of InfluxDB. +### + +[http] + # Determines whether HTTP endpoint is enabled. + # enabled = true + + # Determines whether the Flux query endpoint is enabled. + # flux-enabled = false + + # Determines whether the Flux query logging is enabled. + # flux-log-enabled = false + + # The bind address used by the HTTP service. + # bind-address = ":8086" + + # Determines whether user authentication is enabled over HTTP/HTTPS. + # auth-enabled = false + + # The default realm sent back when issuing a basic auth challenge. + # realm = "InfluxDB" + + # Determines whether HTTP request logging is enabled. + # log-enabled = true + + # Determines whether the HTTP write request logs should be suppressed when the log is enabled. + # suppress-write-log = false + + # When HTTP request logging is enabled, this option specifies the path where + # log entries should be written. If unspecified, the default is to write to stderr, which + # intermingles HTTP logs with internal InfluxDB logging. + # + # If influxd is unable to access the specified path, it will log an error and fall back to writing + # the request log to stderr. + # access-log-path = "" + + # Filters which requests should be logged. Each filter is of the pattern NNN, NNX, or NXX where N is + # a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx. + # If multiple filters are used, then only one has to match. The default is to have no filters which + # will cause every request to be printed. + # access-log-status-filters = [] + + # Determines whether detailed write logging is enabled. + # write-tracing = false + + # Determines whether the pprof endpoint is enabled. This endpoint is used for + # troubleshooting and monitoring. + # pprof-enabled = true + + # Enables authentication on pprof endpoints. Users will need admin permissions + # to access the pprof endpoints when this setting is enabled. This setting has + # no effect if either auth-enabled or pprof-enabled are set to false. + # pprof-auth-enabled = false + + # Enables a pprof endpoint that binds to localhost:6060 immediately on startup. + # This is only needed to debug startup issues. + # debug-pprof-enabled = false + + # Enables authentication on the /ping, /metrics, and deprecated /status + # endpoints. This setting has no effect if auth-enabled is set to false. + # ping-auth-enabled = false + + # Determines whether HTTPS is enabled. + # https-enabled = false + + # The SSL certificate to use when HTTPS is enabled. + # https-certificate = "/etc/ssl/influxdb.pem" + + # Use a separate private key location. + # https-private-key = "" + + # The JWT auth shared secret to validate requests using JSON web tokens. + # shared-secret = "" + + # The default chunk size for result sets that should be chunked. + # max-row-limit = 0 + + # The maximum number of HTTP connections that may be open at once. New connections that + # would exceed this limit are dropped. Setting this value to 0 disables the limit. + # max-connection-limit = 0 + + # Enable http service over unix domain socket + # unix-socket-enabled = false + + # The path of the unix domain socket. + # bind-socket = "/var/run/influxdb.sock" + + # The maximum size of a client request body, in bytes. Setting this value to 0 disables the limit. + # max-body-size = 25000000 + + # The maximum number of writes processed concurrently. + # Setting this to 0 disables the limit. + # max-concurrent-write-limit = 0 + + # The maximum number of writes queued for processing. + # Setting this to 0 disables the limit. + # max-enqueued-write-limit = 0 + + # The maximum duration for a write to wait in the queue to be processed. + # Setting this to 0 or setting max-concurrent-write-limit to 0 disables the limit. + # enqueued-write-timeout = 0 + +### +### [logging] +### +### Controls how the logger emits logs to the output. +### + +[logging] + # Determines which log encoder to use for logs. Available options + # are auto, logfmt, and json. auto will use a more a more user-friendly + # output format if the output terminal is a TTY, but the format is not as + # easily machine-readable. When the output is a non-TTY, auto will use + # logfmt. + # format = "auto" + + # Determines which level of logs will be emitted. The available levels + # are error, warn, info, and debug. Logs that are equal to or above the + # specified level will be emitted. + # level = "info" + + # Suppresses the logo output that is printed when the program is started. + # The logo is always suppressed if STDOUT is not a TTY. + # suppress-logo = false + +### +### [subscriber] +### +### Controls the subscriptions, which can be used to fork a copy of all data +### received by the InfluxDB host. +### + +[subscriber] + # Determines whether the subscriber service is enabled. + # enabled = true + + # The default timeout for HTTP writes to subscribers. + # http-timeout = "30s" + + # Allows insecure HTTPS connections to subscribers. This is useful when testing with self- + # signed certificates. + # insecure-skip-verify = false + + # The path to the PEM encoded CA certs file. If the empty string, the default system certs will be used + # ca-certs = "" + + # The number of writer goroutines processing the write channel. + # write-concurrency = 40 + + # The number of in-flight writes buffered in the write channel. + # write-buffer-size = 1000 + + +### +### [[graphite]] +### +### Controls one or many listeners for Graphite data. +### + +[[graphite]] + # Determines whether the graphite endpoint is enabled. + # enabled = false + # database = "graphite" + # retention-policy = "" + # bind-address = ":2003" + # protocol = "tcp" + # consistency-level = "one" + + # These next lines control how batching works. You should have this enabled + # otherwise you could get dropped metrics or poor performance. Batching + # will buffer points in memory if you have many coming in. + + # Flush if this many points get buffered + # batch-size = 5000 + + # number of batches that may be pending in memory + # batch-pending = 10 + + # Flush at least this often even if we haven't hit buffer limit + # batch-timeout = "1s" + + # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max. + # udp-read-buffer = 0 + + ### This string joins multiple matching 'measurement' values providing more control over the final measurement name. + # separator = "." + + ### Default tags that will be added to all metrics. These can be overridden at the template level + ### or by tags extracted from metric + # tags = ["region=us-east", "zone=1c"] + + ### Each template line requires a template pattern. It can have an optional + ### filter before the template and separated by spaces. It can also have optional extra + ### tags following the template. Multiple tags should be separated by commas and no spaces + ### similar to the line protocol format. There can be only one default template. + # templates = [ + # "*.app env.service.resource.measurement", + # # Default template + # "server.*", + # ] + +### +### [collectd] +### +### Controls one or many listeners for collectd data. +### + +[[collectd]] + # enabled = false + # bind-address = ":25826" + # database = "collectd" + # retention-policy = "" + # + # The collectd service supports either scanning a directory for multiple types + # db files, or specifying a single db file. + # typesdb = "/usr/local/share/collectd" + # + # security-level = "none" + # auth-file = "/etc/collectd/auth_file" + + # These next lines control how batching works. You should have this enabled + # otherwise you could get dropped metrics or poor performance. Batching + # will buffer points in memory if you have many coming in. + + # Flush if this many points get buffered + # batch-size = 5000 + + # Number of batches that may be pending in memory + # batch-pending = 10 + + # Flush at least this often even if we haven't hit buffer limit + # batch-timeout = "10s" + + # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max. + # read-buffer = 0 + + # Multi-value plugins can be handled two ways. + # "split" will parse and store the multi-value plugin data into separate measurements + # "join" will parse and store the multi-value plugin as a single multi-value measurement. + # "split" is the default behavior for backward compatibility with previous versions of influxdb. + # parse-multivalue-plugin = "split" +### +### [opentsdb] +### +### Controls one or many listeners for OpenTSDB data. +### + +[[opentsdb]] + # enabled = false + # bind-address = ":4242" + # database = "opentsdb" + # retention-policy = "" + # consistency-level = "one" + # tls-enabled = false + # certificate= "/etc/ssl/influxdb.pem" + + # Log an error for every malformed point. + # log-point-errors = true + + # These next lines control how batching works. You should have this enabled + # otherwise you could get dropped metrics or poor performance. Only points + # metrics received over the telnet protocol undergo batching. + + # Flush if this many points get buffered + # batch-size = 1000 + + # Number of batches that may be pending in memory + # batch-pending = 5 + + # Flush at least this often even if we haven't hit buffer limit + # batch-timeout = "1s" + +### +### [[udp]] +### +### Controls the listeners for InfluxDB line protocol data via UDP. +### + +[[udp]] + # enabled = false + # bind-address = ":8089" + # database = "udp" + # retention-policy = "" + + # InfluxDB precision for timestamps on received points ("" or "n", "u", "ms", "s", "m", "h") + # precision = "" + + # These next lines control how batching works. You should have this enabled + # otherwise you could get dropped metrics or poor performance. Batching + # will buffer points in memory if you have many coming in. + + # Flush if this many points get buffered + # batch-size = 5000 + + # Number of batches that may be pending in memory + # batch-pending = 10 + + # Will flush at least this often even if we haven't hit buffer limit + # batch-timeout = "1s" + + # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max. + # read-buffer = 0 + +### +### [continuous_queries] +### +### Controls how continuous queries are run within InfluxDB. +### + +[continuous_queries] + # Determines whether the continuous query service is enabled. + # enabled = true + + # Controls whether queries are logged when executed by the CQ service. + # log-enabled = true + + # Controls whether queries are logged to the self-monitoring data store. + # query-stats-enabled = false + + # interval for how often continuous queries will be checked if they need to run + # run-interval = "1s" + +### +### [tls] +### +### Global configuration settings for TLS in InfluxDB. +### + +[tls] + # Determines the available set of cipher suites. See https://golang.org/pkg/crypto/tls/#pkg-constants + # for a list of available ciphers, which depends on the version of Go (use the query + # SHOW DIAGNOSTICS to see the version of Go used to build InfluxDB). If not specified, uses + # the default settings from Go's crypto/tls package. + # ciphers = [ + # "TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305", + # "TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305", + # ] + + # Minimum version of the tls protocol that will be negotiated. If not specified, uses the + # default settings from Go's crypto/tls package. + # min-version = "tls1.2" + + # Maximum version of the tls protocol that will be negotiated. If not specified, uses the + # default settings from Go's crypto/tls package. + # max-version = "tls1.3" diff --git a/meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb b/meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb new file mode 100644 index 000000000..4f2bb78b2 --- /dev/null +++ b/meta-oe/recipes-dbs/influxdb/influxdb_1.7.10.bb @@ -0,0 +1,63 @@ +DESCRIPTION = "InfluxDB is a time series database designed to handle high write and query loads." +HOMEPAGE = "https://www.influxdata.com/products/influxdb-overview/"; + +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://src/${GO_IMPORT}/LICENSE;md5=ba8146ad9cc2a128209983265136e06a" + +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" + +RDEPENDS_${PN} = "bash" +RDEPENDS_${PN}-dev = "bash" + +GO_IMPORT = "github.com/influxdata/influxdb" + +GO_INSTALL = "\ + ${GO_IMPORT}/cmd/influx \ + ${GO_IMPORT}/cmd/influxd \ +" + +SRC_URI = "\ + git://${GO_IMPORT};protocol=https;branch=1.7;destsuffix=${BPN}-${PV}/src/${GO_IMPORT} \ + file://influxdb \ + file://influxdb.conf \ +" + +SRCREV = "c958f436b2e538a88a7815aad721c7774a0b8f63" + +inherit go-mod systemd update-rc.d useradd + +USERADD_PACKAGES = "${PN}" +USERADD_PARAM_${PN} = "--system -d /var/lib/influxdb -m -s /bin/nologin influxdb" + +do_install_prepend() { + rm ${B}/src/${GO_IMPORT}/build.py + rm ${B}/src/${GO_IMPORT}/build.sh + rm ${B}/src/${GO_IMPORT}/Dockerfile* +} + +do_install_append() { + install -d ${D}${sysconfdir}/influxdb + install -m 0644 ${WORKDIR}/influxdb.conf ${D}${sysconfdir}/influxdb + chown -R root.influxdb ${D}${sysconfdir}/influxdb + + install -d ${D}${sysconfdir}/init.d + install -m 0755 ${WORKDIR}/influxdb ${D}${sysconfdir}/init.d/influxdb + + if [ "${@bb.utils.filter('DISTRO_FEATURES', 'sysvinit', d)}" ] ; then + install -d ${D}${sysconfdir}/logrotate.d + install -m 0644 ${S}/src/${GO_IMPORT}/scripts/logrotate ${D}${sysconfdir}/logrotate.d/influxdb + fi + + if [ "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" ] ; then + install -d ${D}${systemd_unitdir}/system + install -m 0644 ${S}/src/${GO_IMPORT}/scripts/influxdb.service ${D}${systemd_system_unitdir}/influxdb.service + fi + + # TODO chown +} + +INITSCRIPT_PACKAGES = "${PN}" +INITSCRIPT_NAME = "influxdb" +INITSCRIPT_PARAMS = "defaults" + +SYSTEMD_SERVICE_${PN} = "influxdb.service" -- 2.29.2
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#88677): https://lists.openembedded.org/g/openembedded-devel/message/88677 Mute This Topic: https://lists.openembedded.org/mt/79598712/21656 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-devel/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
