I have set up an autobuilder for my gumstix work and I'm getting an unusual failure.
The autobuilder starts by nuking tmp, and has a 2 nested loops, the outer loop iterates through 2 machines, the inner loop through a short list of image targets. All builds use the same distro -- Angstrom. The frist build always succeeds for all targets, the second build always fails in bluetooth-utils with the following error: |/home/oe/gumstix/gumstix-oe/tmp/cross/lib/gcc/arm-angstrom-linux-uclibcgnueabi/4.1.2/../../../../arm-angstrom-linux-uclibcgnueabi/bin/ld: .libs/hcid: hidden symbol `__gnu_uldivmod_helper' in /home/oe/gumstix/gumstix-oe/tmp/cross/lib/gcc/arm-angstrom-linux-uclibcgnueabi/4.1.2/libgcc.a(bpabi.o) is referenced by DSO | /home/oe/gumstix/gumstix-oe/tmp/cross/lib/gcc/arm-angstrom-linux-uclibcgnueabi/4.1.2/../../../../arm-angstrom-linux-uclibcgnueabi/bin/ld: final link failed: Nonrepresentable section on output If I swap the order of machines, it is still the second build which fails so it is not tied to the machine. Each machine builds by itself with no problems, it is only when I run the two builds in series that I get the error. Has anyone seen anything like this before? Any hints where I might start looking to debug this? Thanks! Steve _______________________________________________ Openembedded-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
