Hi Victor. Thank you very much for your help, I'll try your advice as soon as possible.
I'm using Qong, but from DAVE (www.dave.eu/qong.html), not Denx ;-) I tried ELDK 4.2 for ARM11, it works very well and it offers full VFP support. I think it's a good solution (better than LTIB...) Unfortunately it lacks some packages I need... I'll write soon (if it works, I'll post a Qong recipe... ;-)). Best Regards, Piero On Wed, Feb 25, 2009 at 11:09 AM, "Víctor M. Palacio Tárrega" < [email protected]> wrote: > Hi Piero, > > Perhaps you're right, and this problem is related to init(see below). > > *********** > file > ~/nfs_dirs/Angstrom-multimedia-xterminal-image-glibc-ipk-2008.1-test-20081211-mx31ads/sbin/init.sysvinit > > > ELF 32-bit LSB executable, ARM, version 1 (SYSV), **for GNU/Linux 2.6.14**, > dynamically linked (uses shared libs), stripped > ************ > > If this helps, I'm building 'Angstrom' distro, instead of 'generic', and > baking a xterminal-image with it. You could do a try with ansgtrom and > xterminal-image. > > > I assume you are using a QONG Module from Denx. Have you tried ELDK for > ARM? > > Off the record... Don't forget to upload your mx31ads kernel recipes, if > it's working. > > Regards, > > > > Piero Pezzin escribió: > >> Hello Victor. >> >> My configuration is similar to yours: kernel derived from the Freescale >> one and rfs from OE. I modified the .bb files to retrieve the tar.gz kernel >> sources from my filesystem and the kernel builds perfectly (the original .bb >> file tries to compile 2.6.19 kernel downloading 2.6.18 and applying a big >> patch (and it fails...), while I need 2.6.22.2 version). >> >> As you can guess, I'm not working on a "real" mx31ads board.. >> >> So you have a working rfs? If you run "file" on your init, does it tell >> it's for 2.4 kernel? >> >> Regards, >> >> Piero >> >> If you run >> >> On Wed, Feb 25, 2009 at 10:25 AM, "Víctor M. Palacio Tárrega" < >> [email protected] <mailto:[email protected]>> wrote: >> >> Hi Piero, >> >> I had plenty of problems with mx31ads kernel from OE. Have you >> tried kernel from LTIB instead? >> >> My actual deployment is kernel from LTIB and rootfilesystem from >> OE. I looking forward for having free time to port the LTIB kernel >> to OE. >> >> Regards, >> >> >> >> Piero Pezzin escribió: >> >> Hello Victor, >> >> I untarred the file containg the rfs, but I get the same >> issue. I'm now rebuilding the bootstrap-image task on another >> system (centos 4.4 on x86-64 machine) to see what comes out. I >> expect, at least, files built for the 2.6 kernel... >> >> Any advice will be greatly appreciated. >> >> Best Regards, >> >> Piero >> >> On Tue, Feb 24, 2009 at 4:29 PM, "Víctor M. Palacio Tárrega" >> <[email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> >> <mailto:[email protected]>>> wrote: >> >> Hi Piero, >> >> Early guess... >> >> Have you untar'd a tar file containing root filesystem (i.e. >> >> tmp/deploy/glibc/images/Angstrom-xterminal-image-glibc-ipk-2008.1-test-20081015-mx31ads.rootfs.tar.gz) >> and exporting the result as NFS? or are you using rootfs >> directory >> created with bitbake? >> >> The correct way is the first one! >> >> Regards, >> >> Piero Pezzin escribió: >> >> Hi all, >> >> I have successfully run the bootstrap-image task for the >> mx31ads machine. When I try to load the root file >> system via >> NFS, I get the following error: >> >> [ 4.510000] Looking up port of RPC 100005/1 on >> 192.168.0.8 >> [ 4.530000] VFS: Mounted root (nfs filesystem). >> [ 4.530000] Freeing init memory: 128K >> [ 4.630000] Kernel panic - not syncing: Attempted to >> kill init! >> [ 4.630000] Rebooting in 1 seconds.. >> >> If I try to run the file command on the init file >> included in >> the rfs, I see that it's built for the 2.4 kernel: >> >> pi...@piero-laptop:~/work2/oe/build/tmp/rootfs/sbin$ file >> init.sysvinit >> init.sysvinit: ELF 32-bit LSB executable, ARM, version >> 1, for >> GNU/Linux 2.4.0, dynamically linked (uses shared libs), >> stripped >> >> In my local.conf I have set the MACHINE="mx31ads" and >> DISTRO="generic" variables. I'm working on a ubuntu 8.04 >> machine and I have customized the .bb files to compile the >> 2.6.22.2 kernel that I need to use (instead of the 2.6.18 >> originally included in the .bb recipe). >> >> Am I missing something? Can someone kindly help me >> understand >> what's happening? >> >> Thanks in advance. >> >> Piero >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Openembedded-users mailing list >> [email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> >> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >> >> >> -- >> //*Víctor M. Palacio Tárrega*// >> >> >> >> _______________________________________________ >> Openembedded-users mailing list >> [email protected] >> <mailto:[email protected]> >> <mailto:[email protected] >> <mailto:[email protected]>> >> >> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Openembedded-users mailing list >> [email protected] >> <mailto:[email protected]> >> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >> >> >> >> -- >> //*Víctor M. Palacio Tárrega*// >> >> >> >> >> >> >> c/ Camí de la pelleria 12 >> >> 08915. Badalona >> >> telf: + 34 663 978 885 >> >> www.adtelecom.es <http://www.adtelecom.es> <http://www.adtelecom.es/> >> >> >> >> _______________________________________________ >> Openembedded-users mailing list >> [email protected] >> <mailto:[email protected]> >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Openembedded-users mailing list >> [email protected] >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >> >> > > > -- > > //*Víctor M. Palacio Tárrega*// > > > > > > > c/ Camí de la pelleria 12 > > 08915. Badalona > > telf: + 34 663 978 885 > > www.adtelecom.es <http://www.adtelecom.es/> > > > _______________________________________________ > Openembedded-users mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users >
_______________________________________________ Openembedded-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-users
