Dear Peter and all community member
Thank a lot for your reply.
Today, I have to spend time on my issues that I still can not
solved. To be honnestly, I can not remember, why I could not
install pyilmbase2-2- on the same folder of ilam...
However, your last e-mail has some important information that I
need to solve first.
To resume, I download ilam2.2.0 into a "downlaod" folder and I
untar it, I cd into pyilmbase-2-2-0 in order to compile. First I
simply run that command
/$ ./compile --prefix=/opt/pyilmbase2-2-0/
I also "accidently" run this command
/$ ./compile --prefix=/opt/ilmbase2-2-0/
Both display this message/
/
/checking for boost::python... no
*** Could not run the boost::python test program, checking why...
*** The test program could not be compiled. Is boost::python
installed?
*** Check that the cflags (below) includes the boost::python
include directory
***
*** Flags used by the test:
*** cflags: -g -O2 -I/usr/include/python2.7 -g -O2
-I/usr/include/python2.7
*** ldflags: -L/opt/ilmbase-2-2-0/lib -L/usr/lib64
-L/opt/ilmbase-2-2-0/lib -L/usr/lib64
***
*** You can also run configure with --disable-boostpythontest to
skip this test.
configure: error: Could not compile boost::python test program.
/
You mentioned to check if boost has been installed/. /Yes, I did
itwithout issues. I installed boost 1.65.1 into /opt/boost_1.65.1
You also mentionned to try this following command, which
indicated where is boost installation
/$ ./configure --prefix=/opt/pyilmbase-2-2-0
--with-boost-include-dir=/opt/boost_1.65.1/include
--with-boost-lib-dir=/opt/boost_1.65.1/lib/
which look now really better, as_I do not_ have the error
message, starting with
/checking for boost::python... no
*** Could not run the boost::python test program, checking why...
*** The test program could not be compiled. Is boost::python
installed?/
As I can not find tutorial or example of pyilmbase installation,
I run the following command from pyilmbase2-2-0 untar-ed folder,
just after the ./compile command
# make
which shown me errors :o(
*Before shwoing the error*, note that into the /etc/bashrc file,
I save the following line
/export PATH=/opt/lua53/bin:$PATH//
//
//#export LD_LIBRARY_PATH=/opt/lua53/lib:$LD_LIBRARY_PATH//
//export LD_LIBRARY_PATH=/opt/lua53/lib:/opt/ilmbase-2-2-0/lib//
//
//export LUA_INCLUDE_DIR=/opt/lua53/include//
//export LUA_LIBRARIES=/opt/lua53/lib//
//
//export PKG_CONFIG_PATH=/opt/ilmbase-2-2-0/lib/pkgconfig/
Nothing is about boost. Is it important?
Here is the error message generated by /make/ from
pyilmbase-2-2-0 folder:
/[root@pc6 pyilmbase-2.2.0]# make
Making all in config
make[1]: Entering directory
`/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
make all-am
make[2]: Entering directory
`/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
make[2]: Leaving directory
`/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
make[1]: Leaving directory
`/root/install-package/OpenEXR/pyilmbase-2.2.0/config'
Making all in PyIex
make[1]: Entering directory
`/root/install-package/OpenEXR/pyilmbase-2.2.0/PyIex'
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H
-I. -I../config -pthread -I/opt/ilmbase-2-2-0/include/OpenEXR
-I.. -I../config -pipe -g -O2 -I/opt/boost_1.65.1/include
-I/usr/include/python2.7 -MT PyIex.lo -MD -MP -MF .deps/PyIex.Tpo
-c -o PyIex.lo PyIex.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../config -pthread
-I/opt/ilmbase-2-2-0/include/OpenEXR -I.. -I../config -pipe -g
-O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -MT
PyIex.lo -MD -MP -MF .deps/PyIex.Tpo -c PyIex.cpp -fPIC -DPIC -o
.libs/PyIex.o
In file included from /usr/include/python2.7/pyconfig.h:6:0,
from /usr/include/python2.7/Python.h:8,
from ./PyIex.h:45,
from PyIex.cpp:42:
/usr/include/python2.7/pyconfig-64.h:1188:0: warning:
"_POSIX_C_SOURCE" redefined [enabled by default]
#define _POSIX_C_SOURCE 200112L
^
In file included from
/usr/include/c++/4.8.2/x86_64-redhat-linux/bits/os_defines.h:39:0,
from
/usr/include/c++/4.8.2/x86_64-redhat-linux/bits/c++config.h:2097,
from /usr/include/c++/4.8.2/iosfwd:38,
from /usr/include/c++/4.8.2/ios:38,
from /usr/include/c++/4.8.2/istream:38,
from /usr/include/c++/4.8.2/sstream:38,
from ./PyIex.h:44,
from PyIex.cpp:42:
/usr/include/features.h:168:0: note: this is the location of the
previous definition
# define _POSIX_C_SOURCE 200809L
^
In file included from /usr/include/python2.7/pyconfig.h:6:0,
from /usr/include/python2.7/Python.h:8,
from ./PyIex.h:45,
from PyIex.cpp:42:
/usr/include/python2.7/pyconfig-64.h:1210:0: warning:
"_XOPEN_SOURCE" redefined [enabled by default]
#define _XOPEN_SOURCE 600
^
In file included from
/usr/include/c++/4.8.2/x86_64-redhat-linux/bits/os_defines.h:39:0,
from
/usr/include/c++/4.8.2/x86_64-redhat-linux/bits/c++config.h:2097,
from /usr/include/c++/4.8.2/iosfwd:38,
from /usr/include/c++/4.8.2/ios:38,
from /usr/include/c++/4.8.2/istream:38,
from /usr/include/c++/4.8.2/sstream:38,
from ./PyIex.h:44,
from PyIex.cpp:42:
/usr/include/features.h:170:0: note: this is the location of the
previous definition
# define _XOPEN_SOURCE 700
^
mv -f .deps/PyIex.Tpo .deps/PyIex.Plo
/bin/sh ../libtool --tag=CXX --mode=link g++ -pipe -g -O2
-I/opt/boost_1.65.1/include -I/usr/include/python2.7
-version-info 2:2:0 -no-undefined -L/opt/ilmbase-2-2-0/lib
-L/opt/boost_1.65.1/lib -L/usr/lib64 -o libPyIex.la -rpath
/opt/pyilmbase-2-2-0/lib PyIex.lo -lz -pthread
-L/opt/ilmbase-2-2-0/lib -lImath -lHalf -lIex -lIexMath
-lIlmThread -lboost_python -lpython2.7
libtool: link: g++ -shared -nostdlib
/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crti.o
/usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtbeginS.o .libs/PyIex.o
-Wl,-rpath -Wl,/opt/ilmbase-2-2-0/lib -Wl,-rpath
-Wl,/opt/ilmbase-2-2-0/lib -L/opt/ilmbase-2-2-0/lib
-L/opt/boost_1.65.1/lib -L/usr/lib64 -lz
/opt/ilmbase-2-2-0/lib/libImath.so
/opt/ilmbase-2-2-0/lib/libHalf.so
/opt/ilmbase-2-2-0/lib/libIexMath.so
/opt/ilmbase-2-2-0/lib/libIlmThread.so
/opt/ilmbase-2-2-0/lib/libIex.so -lboost_python -lpython2.7
-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5
-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64
-L/lib/../lib64 -L/usr/lib/../lib64
-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../.. -lstdc++ -lm
-lc -lgcc_s /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtendS.o
/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crtn.o
-pthread -pthread -Wl,-soname -Wl,libPyIex.so.2 -o
.libs/libPyIex.so.2.0.2
libtool: link: (cd ".libs" && rm -f "libPyIex.so.2" && ln -s
"libPyIex.so.2.0.2" "libPyIex.so.2")
libtool: link: (cd ".libs" && rm -f "libPyIex.so" && ln -s
"libPyIex.so.2.0.2" "libPyIex.so")
libtool: link: ( cd ".libs" && rm -f "libPyIex.la" && ln -s
"../libPyIex.la" "libPyIex.la" )
/bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H
-I. -I../config -pthread -I/opt/ilmbase-2-2-0/include/OpenEXR
-I.. -I../config -pipe -g -O2 -I/opt/boost_1.65.1/include
-I/usr/include/python2.7 -MT iexmodule.lo -MD -MP -MF
.deps/iexmodule.Tpo -c -o iexmodule.lo iexmodule.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../config -pthread
-I/opt/ilmbase-2-2-0/include/OpenEXR -I.. -I../config -pipe -g
-O2 -I/opt/boost_1.65.1/include -I/usr/include/python2.7 -MT
iexmodule.lo -MD -MP -MF .deps/iexmodule.Tpo -c iexmodule.cpp
-fPIC -DPIC -o .libs/iexmodule.o
mv -f .deps/iexmodule.Tpo .deps/iexmodule.Plo
/bin/sh ../libtool --tag=CXX --mode=link g++ -pipe -g -O2
-I/opt/boost_1.65.1/include -I/usr/include/python2.7
-avoid-version -module -L/opt/ilmbase-2-2-0/lib
-L/opt/boost_1.65.1/lib -L/usr/lib64 -o iexmodule.la
<http://iexmodule.la> -rpath
/opt/pyilmbase-2-2-0/lib64/python2.7/site-packages iexmodule.lo
libPyIex.la -lboost_python -lpython2.7
libtool: link: g++ -shared -nostdlib
/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crti.o
/usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtbeginS.o
.libs/iexmodule.o -Wl,-rpath
-Wl,/root/install-package/OpenEXR/pyilmbase-2.2.0/PyIex/.libs
-Wl,-rpath -Wl,/opt/ilmbase-2-2-0/lib -Wl,-rpath
-Wl,/opt/pyilmbase-2-2-0/lib -Wl,-rpath
-Wl,/opt/ilmbase-2-2-0/lib -L/opt/ilmbase-2-2-0/lib
-L/opt/boost_1.65.1/lib -L/usr/lib64 ./.libs/libPyIex.so -lz
/opt/ilmbase-2-2-0/lib/libImath.so
/opt/ilmbase-2-2-0/lib/libHalf.so
/opt/ilmbase-2-2-0/lib/libIexMath.so
/opt/ilmbase-2-2-0/lib/libIlmThread.so
/opt/ilmbase-2-2-0/lib/libIex.so -lboost_python -lpython2.7
-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5
-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64
-L/lib/../lib64 -L/usr/lib/../lib64
-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../.. -lstdc++ -lm
-lc -lgcc_s /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtendS.o
/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crtn.o
-pthread -Wl,-soname -Wl,iexmodule.so -o .libs/iexmodule.so
/usr/bin/ld: /opt/boost_1.65.1/lib/libboost_python.a(dict.o):
relocation R_X86_64_32 against `.rodata.str1.1' can not be used
when making a shared object; recompile with -fPIC
/opt/boost_1.65.1/lib/libboost_python.a: error adding symbols:
Bad value
collect2: error: ld returned 1 exit status
make[1]: *** [iexmodule.la <http://iexmodule.la>] Error 1
make[1]: Leaving directory
`/root/install-package/OpenEXR/pyilmbase-2.2.0/PyIex'
make: *** [all-recursive] Error 1
[root@pc6 pyilmbase-2.2.0]# /
I wonder, if there is an official procedure to install
pyilmbase-2.2.0
*I also observed a file name**install-sh. How can that file can
be usefull for the installation?*
You also spoke about installing into the same folder of
ilmbase-2-2-0. What would you change regarding my about steps? To
be honst with you, last week I tried but I do not rember why, I
finally soecified a folder dedicated for pyilmbase2-2-0 in /opt/
Many many thank for your help and help from openexr community.
Cheers
Pierrot
/
/
On 12/1/17 1:21 AM, Peter Hillman wrote:
./configure --prefix=/opt/ilmbase-2-2-0
--with-boost-include-dir=/opt/boost/include
--with-boost-lib-dir=/opt/boost/lib
_______________________________________________
Openexr-devel mailing list
Openexr-devel@nongnu.org <mailto:Openexr-devel@nongnu.org>
https://lists.nongnu.org/mailman/listinfo/openexr-devel
